auto-sync 2026-07-05 18:00
This commit is contained in:
parent
c0f9f11ae5
commit
4de31e6aaa
105
03-Architecture-Hardware/4G-USB-Reset-LED-addition.md
Normal file
105
03-Architecture-Hardware/4G-USB-Reset-LED-addition.md
Normal file
@ -0,0 +1,105 @@
|
|||||||
|
---
|
||||||
|
title: HBOX v3 — 4G modem USB / Reset / LED / power-pin fix (build spec)
|
||||||
|
project: Project Drogheda
|
||||||
|
date: 2026-07-05
|
||||||
|
status: SCHEMATIC COMPLETE (ERC 0 errors) — board sync + place + route to finish in KiCad GUI
|
||||||
|
tags: [project-drogheda, hardware, 4g, usb, revision]
|
||||||
|
---
|
||||||
|
|
||||||
|
# 4G NTRIP module — add USB, reset, LED + fix required power pins
|
||||||
|
|
||||||
|
Goal: firmware-update and reset the 4G modem **in place** on the EINARBoard (no more
|
||||||
|
swapping it to the simpleRTK), and wire the module's **mandatory** pins that are
|
||||||
|
currently floating.
|
||||||
|
|
||||||
|
## Module pin map (XBee-form, per datasheet) → EINARBoard socket
|
||||||
|
J7 = module pins 1–10 (row 1), J8 = module pins 11–20 (row 2, numbered 20→11 top-to-bottom).
|
||||||
|
|
||||||
|
| Module pin | Function | Socket pad | Current | Action |
|
||||||
|
|---|---|---|---|---|
|
||||||
|
| 1 VCC | 3.3–3.6 V, 2 A pk | J7.1 | 3V3_MODEM ✓ | keep |
|
||||||
|
| 2 TX | data out | J7.2 | DOUT_4G ✓ | keep |
|
||||||
|
| 3 RX | data in | J7.3 | DIN_4G ✓ | keep |
|
||||||
|
| 4 GND | ground | J7.4 | **NC** | → GND |
|
||||||
|
| 5 RESET | low = reset | J7.5 | **NC** | → reset button → GND |
|
||||||
|
| 6 V_USB | 5 V enables USB | J7.6 | **NC** | → USB VBUS (5 V) |
|
||||||
|
| 7 USB+ | USB D+ | J7.7 | **NC** | → USB D+ |
|
||||||
|
| 8 USB− | USB D− | J7.8 | **NC** | → USB D− |
|
||||||
|
| 9 DTR | disabled | J7.9 | NC | leave |
|
||||||
|
| 10 GND | ground | J7.10 | GND ✓ | keep |
|
||||||
|
| 11 GND | ground | **J8.10** | **NC** | → GND |
|
||||||
|
| 12 CTS | disabled | J8.9 | NC | leave |
|
||||||
|
| 13 LED | 1.8 V LED drive | **J8.8** | **NC** | → R + LED → GND |
|
||||||
|
| 14 VREF | **must = VCC** | **J8.7** | **NC** | → 3V3_MODEM |
|
||||||
|
| 15 GND | ground | **J8.6** | **NC** | → GND |
|
||||||
|
| 16 RTS | disabled | J8.5 | NC | leave |
|
||||||
|
| 20 ON/OFF | **GND = always ON** | **J8.1** | **NC** | → GND |
|
||||||
|
|
||||||
|
> ⚠️ **Must-fix even if we skipped USB:** VREF (J8.7→VCC) and ON/OFF (J8.1→GND). Without
|
||||||
|
> ON/OFF tied low the modem may never power on. Confirm J8 pad numbers vs. the Ardusimple
|
||||||
|
> footprint before wiring.
|
||||||
|
|
||||||
|
## Parts to add
|
||||||
|
| Ref | Part | Notes |
|
||||||
|
|---|---|---|
|
||||||
|
| J9 | **USB-C receptacle, USB 2.0** (e.g. GCT USB4085 / TYPE-C-31-M-12) | D+/D−, VBUS, GND, 2×CC |
|
||||||
|
| R_cc1, R_cc2 | 5.1 kΩ 0402/0603 | CC1, CC2 → GND (device-mode detect, required for Type-C) |
|
||||||
|
| R_dp, R_dm | 0 Ω (optional series) | in D+/D− if you want the option; can be DNP |
|
||||||
|
| SW_4G | tactile 6 mm (or SMD) | RESET(J7.5) ↔ GND |
|
||||||
|
| D_4G | LED 0805 | anode ← R_led ← LED(J8.8); cathode → GND |
|
||||||
|
| R_led | ~1 kΩ | LED current limit (pin sources 1.8 V) |
|
||||||
|
|
||||||
|
## New nets
|
||||||
|
`USB_VBUS` (→ J7.6 V_USB + USB-C VBUS), `USB_DP` (J7.7 ↔ USB-C D+), `USB_DM` (J7.8 ↔ USB-C D−),
|
||||||
|
`MODEM_RST` (J7.5 ↔ SW_4G ↔ GND), `MODEM_LED` (J8.8 ↔ R_led ↔ D_4G ↔ GND).
|
||||||
|
Reuse existing `3V3_MODEM` for VREF, `GND` for ON/OFF + spare grounds.
|
||||||
|
|
||||||
|
## Placement
|
||||||
|
Open pocket **right of / below the XBee sockets** (board ≈ x200–212, y76–98). USB-C at the
|
||||||
|
board edge (mechanical access), button + LED beside it.
|
||||||
|
|
||||||
|
## Routing
|
||||||
|
- **USB D+/D−**: keep the pair together and short; USB-2.0 FS/HS firmware speed is forgiving —
|
||||||
|
no controlled-impedance needed, just route them side-by-side, similar length, GND nearby.
|
||||||
|
- Everything else is low-speed/DC — trivial.
|
||||||
|
- Do it by adding to the **schematic first** → re-import → place → FreeRoute the new nets
|
||||||
|
(lock existing routing) → DRC → re-export fab.
|
||||||
|
|
||||||
|
---
|
||||||
|
|
||||||
|
## STATUS 2026-07-05 — what's done, what's left
|
||||||
|
|
||||||
|
**DONE (in the schematic `hbox-watchdog-v3-PROD.kicad_sch`, verified ERC 0 errors):**
|
||||||
|
- Modem must-fix pins wired: **J8.1→GND (ON/OFF), J8.7→3V3_MODEM (VREF), J8.6/J8.10/J7.4→GND**.
|
||||||
|
- New parts added + net-labelled: **J9** USB-C (USB_C_Receptacle_USB2.0_14P, fp GCT_USB4085),
|
||||||
|
**Rcc1/Rcc2** 5.1k, **SW4G** reset (CK_PTS636 SMD), **Rmled** 1k, **D4G** LED (0805).
|
||||||
|
- All connections: USB_VBUS→J7.6, USB_DP→J7.7, USB_DM→J7.8, MODEM_RST→J7.5+SW4G, MODEM_LED→J8.8
|
||||||
|
chain, CC resistors→GND, USB-C VBUS/GND/CC/D±. (Verified on a trial board sync — J7/J8 pads
|
||||||
|
took the right nets.)
|
||||||
|
- Fixed a reference collision: the schematic already had a `Rled` (10k, live circuit); the new
|
||||||
|
LED resistor is **`Rmled`** so the existing part is untouched.
|
||||||
|
|
||||||
|
**LEFT (do in the KiCad GUI — the MCP's board backend left spurious DRC shorts on sync, so the
|
||||||
|
board was reverted to its clean pre-USB state; the schematic is the source of truth):**
|
||||||
|
1. **Tools → Update PCB from Schematic (F8)** — pulls in J9, Rcc1, Rcc2, SW4G, Rmled, D4G and
|
||||||
|
assigns the modem-pin nets. (GUI F8 is clean; don't use the MCP sync.)
|
||||||
|
2. **Place** the 6 parts in the pocket right of the XBee (board coords, mm):
|
||||||
|
|
||||||
|
| Ref | x | y | note |
|
||||||
|
|---|---|---|---|
|
||||||
|
| J9 (USB-C) | 199.5 | 79 | fills pocket; pads clear J8 (left) & P3 (right) |
|
||||||
|
| Rcc1 | 198.5 | 75.3 | CC1 5.1k, row above J9 |
|
||||||
|
| Rcc2 | 201.2 | 75.3 | CC2 5.1k |
|
||||||
|
| Rmled | 203.9 | 75.3 | LED 1k |
|
||||||
|
| D4G | 206.4 | 75.3 | LED |
|
||||||
|
| SW4G | 202.5 | 90 | reset, in the strip below the y≈87.5 trace |
|
||||||
|
|
||||||
|
Courtyard "kisses" with J8/P3 are OK (pads clear) — same as the board's existing by-design kisses.
|
||||||
|
3. **Route 9 nets.** GND pads (J9 grounds+shields, Rcc·2, SW4G·2, D4G·1) drop to the In1 GND plane
|
||||||
|
with a via each (THT grounds auto-connect). Signals: USB_VBUS/DP/DM run J7.6/7/8 → J9 (under the
|
||||||
|
module is fine); MODEM_RST J7.5→SW4G; MODEM_LED J8.8→Rmled→D4G; CC1/CC2 J9→Rcc. Keep D+/D-
|
||||||
|
together. **FreeRouting** the ratsnest is the fast path (as before).
|
||||||
|
4. **Fill All Zones (B)** → **DRC** → should be back to the pre-existing cosmetic set (0 shorts).
|
||||||
|
5. **Re-export the JLCPCB fab package** (`fab-jlcpcb/`) — the current zip predates all of this.
|
||||||
|
|
||||||
|
Backup of the clean board kept at `kicad/hbox-watchdog-v3-PROD.kicad_pcb.bak-preusb`.
|
||||||
140
03-Architecture-Hardware/Assembly-BOM-Split.md
Normal file
140
03-Architecture-Hardware/Assembly-BOM-Split.md
Normal file
@ -0,0 +1,140 @@
|
|||||||
|
---
|
||||||
|
title: HBOX Watchdog v3 PROD — Assembly BOM Split
|
||||||
|
project: Project Drogheda
|
||||||
|
date: 2026-07-05
|
||||||
|
tags: [project-drogheda, hardware, pcb, assembly, jlcpcb, bom]
|
||||||
|
status: Board routed, DRC fab-clean — assembly reference for JLCPCB PCBA order
|
||||||
|
---
|
||||||
|
|
||||||
|
# HBOX Watchdog v3 PROD — Assembly BOM Split
|
||||||
|
|
||||||
|
Audit of the routed board (`kicad/hbox-watchdog-v3-PROD.kicad_pcb`, 126 footprints)
|
||||||
|
for the JLCPCB assembly order. Three buckets: **(A)** what JLC solders onto the
|
||||||
|
board, **(B)** the plug-in modules that sit on top (you install), and **(C)** what
|
||||||
|
lives off-board and connects through the JST harness.
|
||||||
|
|
||||||
|
| Bucket | Count | JLC assembles? |
|
||||||
|
|---|---|---|
|
||||||
|
| A. On-board parts (SMD + THT) | 103 parts + 12 connectors + 5 sockets | **Yes** |
|
||||||
|
| B. Plug-in modules (on top) | 3 modules | No — you install |
|
||||||
|
| C. External via JST harness | wired to 12 connectors | No — off-board |
|
||||||
|
| Fab features (2 test points, 4 mounting holes) | 6 | n/a |
|
||||||
|
|
||||||
|
---
|
||||||
|
|
||||||
|
## A. Assembled by JLC — on the PCB
|
||||||
|
|
||||||
|
### A1 · SMD parts (standard PCBA — 98 parts)
|
||||||
|
|
||||||
|
| Qty | Value | Package | Refs |
|
||||||
|
|---|---|---|---|
|
||||||
|
| 10 | 10k | R0603 | R2, R5, R6, R7, R8, R41, Rigb, Rled, Rrp, Rtp |
|
||||||
|
| 8 | 100k | R0603 | R20, R56, R57, R58, Ren1, Rfreq, Rfreq2, Rgs |
|
||||||
|
| 7 | 100nF | C0603 | C5, C7, C9, C11, C24, Cu3, Cu4 |
|
||||||
|
| 5 | LED | LED0805 | D1, DB1, DB2, DB3, DB4 |
|
||||||
|
| 4 | 1k | R0603 | R1, R3, R40, Rts |
|
||||||
|
| 4 | 330R | R0603 | RB1, RB2, RB3, RB4 |
|
||||||
|
| 3 | SS34 | D_SMA | D2, Dbk, Dbk2 |
|
||||||
|
| 3 | 22uF | C0805 | C35, C40, C41 |
|
||||||
|
| 3 | 100k/1% | R0603 | R52, R54, R60 |
|
||||||
|
| 2 | MP1584EN | SOIC-8-EP | U2 (fan buck), U7 (modem buck) |
|
||||||
|
| 2 | 2.2nF | C0603 | Ccomp, Ccomp2 |
|
||||||
|
| 2 | 100R | R0603 | Rg, Rig |
|
||||||
|
| 2 | 10uF | C0805 | C30, C34 |
|
||||||
|
| 2 | 4.7k | R0603 | R30, R31 |
|
||||||
|
| 2 | 40.2k | R0603 | Rcomp, Rcomp2 |
|
||||||
|
| 2 | MMBT3904 | SOT-23 | Q5, Q6 |
|
||||||
|
| 2 | 10nF | C0603 | Cbst, Cbst2 |
|
||||||
|
| 2 | AO3400A | SOT-23 | Q2, Q4 |
|
||||||
|
| 2 | 10k/1% | R0603 | R42, R55 |
|
||||||
|
| 2 | 47uF | C1210 | C32, C33 |
|
||||||
|
| 1 | **LTC4040EUFD** | QFN-24 | U6 (backup-supply/charger) |
|
||||||
|
| 1 | AO4406A | SOIC-8 | Q7 |
|
||||||
|
| 1 | AO3401A | SOT-23 | Q1 |
|
||||||
|
| 1 | IRFR5305 | TO-252 | Q10 |
|
||||||
|
| 1 | BZX84C15 | SOT-23 | DzG |
|
||||||
|
| 1 | BAT54 | SOD-123 | D5 |
|
||||||
|
| 1 | 1N4148W | SOD-123 | D6 |
|
||||||
|
| 1 | SMBJ33A | D_SMB | D10 |
|
||||||
|
| 1 | **SHT40-AD1B** | DFN-4 | U3 (humidity/temp) |
|
||||||
|
| 1 | **TMP102** | SOT-563 | U4 (temp) |
|
||||||
|
| 1 | 8mR/1% | R1206 | RS1 (current sense) |
|
||||||
|
| 1 | PPTC 3A | Fuse1812 | F1 |
|
||||||
|
| 3 | 2.2uH / 10uH / 10uH-2A | SRU8028 8×8 | L6, L2, L7 |
|
||||||
|
| 1 | 22uF/50V | C1210 | C22 |
|
||||||
|
| 1 | 22uF/16V | C0805 | C23 |
|
||||||
|
| 1 | 2.2uF | C0603 | C31 |
|
||||||
|
| — | *(single-value R's)* | R0603 | Ren2 20k, Rdfu 22k, R21 19.1k, R50 825R, R51 287k, R53 499k, R61 31.6k |
|
||||||
|
| 4 | jumpers | SolderJumper | JP1 (0R), JP2 (F2), JP3 (F1), JP4 (F0) |
|
||||||
|
|
||||||
|
### A2 · Through-hole parts (THT — JLC "through-hole assembly" surcharge, or hand-solder)
|
||||||
|
|
||||||
|
| Ref | Part | Note |
|
||||||
|
|---|---|---|
|
||||||
|
| K1 | Omron G5V-1 DC5 relay | Modo-B fail-safe bypass |
|
||||||
|
| SW1 | 6 mm push (RESET) | |
|
||||||
|
| C3, C10, C43 | Radial electrolytics (47µF, 47µF/50V, 100µF) | |
|
||||||
|
|
||||||
|
### A3 · Connectors & module sockets (THT — soldered to board)
|
||||||
|
|
||||||
|
| Ref | Part | Purpose |
|
||||||
|
|---|---|---|
|
||||||
|
| P1 | Phoenix MKDS 1.5-5 (5-pos terminal) | GX16 machine power in |
|
||||||
|
| P2, P8, P10, P11, P12 | JST-XH 2-pin | see bucket C |
|
||||||
|
| P4, P13 | JST-XH 3-pin | |
|
||||||
|
| P3, P5, P6 | JST-XH 4-pin | |
|
||||||
|
| H3 | 1×3 pin header | USART1 reserved |
|
||||||
|
| **J1, J2** | 1×20 female 2.54 | **Blackpill socket** |
|
||||||
|
| **J7, J8** | 1×10 female 2.00 | **4G XBee socket** |
|
||||||
|
| **MOD1** | Arduino-UNO-form female headers | **simpleRTK2B Pro socket** |
|
||||||
|
|
||||||
|
> ⚠️ **Confirm before ordering:** engineering notes flag **P3 / P13 / H3 as DNP**
|
||||||
|
> (Modo-B + K1 NC bypass makes them redundant), but they are **not** marked DNP in
|
||||||
|
> the board file — so JLC would populate them. Decide per-connector.
|
||||||
|
|
||||||
|
---
|
||||||
|
|
||||||
|
## B. Plug-in modules — mounted ON TOP (you install, NOT in the JLC order)
|
||||||
|
|
||||||
|
These are complete boards that seat into the sockets above. Do **not** add them to
|
||||||
|
the JLC BOM — they're hand-fitted after the PCBA arrives.
|
||||||
|
|
||||||
|
| Module | Seats into | Notes |
|
||||||
|
|---|---|---|
|
||||||
|
| **simpleRTK2B Pro** (ZED-F9P) | MOD1 (Arduino headers) | GNSS RTK receiver |
|
||||||
|
| **STM32F411 Blackpill** | J1 + J2 (2×20) | watchdog MCU |
|
||||||
|
| **4G NTRIP Master** (XBee LTE) | J7 + J8 (2×10, 2 mm) | modem, 3V3 socket |
|
||||||
|
|
||||||
|
---
|
||||||
|
|
||||||
|
## C. External — connected via the JST harness (NOT on the board)
|
||||||
|
|
||||||
|
Everything that plugs into the edge connectors and lives outside the HBOX (or in the
|
||||||
|
cabinet). Wire per the harness pinout (`harness-connector-pinout.md`).
|
||||||
|
|
||||||
|
| Conn | Wires to (external) | Key pins |
|
||||||
|
|---|---|---|
|
||||||
|
| **P1** GX16-5 | Machine power + ignition from the cabinet | 1 = 24V_IN ⚡, 3 = IGN_IN, 2 = GND |
|
||||||
|
| **P2** 5V-IN | Mean Well SD-15B-05 5 V supply (VEH5V rail) | 1 = VEH5V ⚡, 2 = GND |
|
||||||
|
| **P3** RTK2B-UART1 | RTK2B UART1 tap (GNSS TX/RX) | 1 = SW_5V ⚡, 3 = GNSS_TX, 4 = GNSS_RX |
|
||||||
|
| **P4** BATT | 1S4P 12 Ah pack + NTC | 1 = BAT_PLUS ⚡, 3 = NTC, 2 = GND |
|
||||||
|
| **P5** TEMP_PROBE | External I²C temp/probe header | 1 = 3V3, 3 = SDA, 4 = SCL |
|
||||||
|
| **P6** FAN | Cooling fan (5 V, tach) | 1 = 5V_FAN ⚡, 2 = FAN_RET, 4 = TACH |
|
||||||
|
| **P8** PANEL_LED | Panel status LED | 1 = LED_A, 2 = LED_K |
|
||||||
|
| **P10** RESET-EXT | External reset button | 1 = NRST, 2 = GND |
|
||||||
|
| **P11** CUTOFF-SW | Power cutoff switch (SYS→MAIN 5 V) | 1 = MAIN5V ⚡, 2 = SYS5V ⚡ |
|
||||||
|
| **P12** NTC-HOTSPOT | Cabinet hotspot NTC | 1 = NTC_TEMP, 2 = GND |
|
||||||
|
| **P13** MODO-B-UPLINK | Modo-B uplink to 4G | 1 = USART1_RX, 2 = DIN_4G, 3 = GND |
|
||||||
|
|
||||||
|
---
|
||||||
|
|
||||||
|
## Action items before the JLCPCB order
|
||||||
|
|
||||||
|
1. **Add LCSC part numbers** to the BOM (`fab-jlcpcb/…-BOM.csv`) — it exports value +
|
||||||
|
footprint only; JLC PCBA matches on LCSC part #. Watch the odd ones:
|
||||||
|
**LTC4040EUFD, SHT40-AD1B, TMP102, MP1584EN, AO4406A, Bourns SRU8028** — verify JLC/LCSC stock.
|
||||||
|
2. **Decide THT assembly** — JLC charges extra for through-hole (K1, SW1, C3/C10/C43,
|
||||||
|
all connectors/sockets). Common approach: JLC does SMD, you hand-solder the
|
||||||
|
connectors + sockets (also avoids paying JLC for the big Phoenix/JST parts).
|
||||||
|
3. **Resolve the P3 / P13 / H3 DNP question** above.
|
||||||
|
4. Do **not** BOM the three plug-in modules (bucket B).
|
||||||
77
03-Architecture-Hardware/Socket-Pinout-Silkscreen.md
Normal file
77
03-Architecture-Hardware/Socket-Pinout-Silkscreen.md
Normal file
@ -0,0 +1,77 @@
|
|||||||
|
---
|
||||||
|
title: HBOX Watchdog v3 PROD — Socket Pinouts (for silkscreen)
|
||||||
|
project: Project Drogheda
|
||||||
|
date: 2026-07-05
|
||||||
|
tags: [project-drogheda, hardware, pcb, silkscreen, pinout]
|
||||||
|
---
|
||||||
|
|
||||||
|
# Socket pinouts — for silkscreen labelling
|
||||||
|
|
||||||
|
Connected pins only (NC pins omitted). "Silk" = suggested short label that fits the
|
||||||
|
2.54 mm pitch (vertical text). Pin 1 is the **square** pad on each header.
|
||||||
|
|
||||||
|
## J1 — Blackpill (left row, pins 1→20 left to right)
|
||||||
|
| Pin | Net | Silk |
|
||||||
|
|---|---|---|
|
||||||
|
| 5 | NRST | NRST |
|
||||||
|
| 6 | BAT_SENSE | BSNS |
|
||||||
|
| 7 | PWR_CTRL | PCTL |
|
||||||
|
| 8 | GNSS_TX | G-TX |
|
||||||
|
| 9 | GNSS_RX | G-RX |
|
||||||
|
| 10 | 5V_SENSE | 5VS |
|
||||||
|
| 11 | IGN_SENSE | IGN |
|
||||||
|
| 12 | FAN_PWM | FPWM |
|
||||||
|
| 14 | EXT_LED | ELED |
|
||||||
|
| 15 | NTC_TEMP | NTC |
|
||||||
|
| 17 | FAN_TACH | FTAC |
|
||||||
|
| 18 | 3V3 | 3V3 |
|
||||||
|
| 19 | GND | GND |
|
||||||
|
| 20 | SYS5V | 5V |
|
||||||
|
|
||||||
|
## J2 — Blackpill (right row, pins 1→20)
|
||||||
|
| Pin | Net | Silk |
|
||||||
|
|---|---|---|
|
||||||
|
| 1 | BATLED1 | BL1 |
|
||||||
|
| 2 | BATLED2 | BL2 |
|
||||||
|
| 3 | BATLED3 | BL3 |
|
||||||
|
| 4 | BATLED4 | BL4 |
|
||||||
|
| 5 | CHRG_EN | CHEN |
|
||||||
|
| 6 | USART1_TX | U-TX |
|
||||||
|
| 7 | USART1_RX | U-RX |
|
||||||
|
| 11 | CHRG_STAT | CSTA |
|
||||||
|
| 12 | CHRG_FAULT | CFLT |
|
||||||
|
| 13 | BYP_CTRL | BYP |
|
||||||
|
| 14 | I2C_SCL | SCL |
|
||||||
|
| 15 | I2C_SDA | SDA |
|
||||||
|
| 18 | SYS5V | 5V |
|
||||||
|
| 19 | GND | GND |
|
||||||
|
| 20 | 3V3 | 3V3 |
|
||||||
|
|
||||||
|
## J7 — 4G XBee row 1 (pins 1→10 top to bottom)
|
||||||
|
| Pin | Net | Silk |
|
||||||
|
|---|---|---|
|
||||||
|
| 1 | 3V3_MODEM | 3V3 |
|
||||||
|
| 2 | DOUT_4G | DOUT |
|
||||||
|
| 3 | DIN_4G | DIN |
|
||||||
|
| 10 | GND | GND |
|
||||||
|
|
||||||
|
## J8 — 4G XBee row 2
|
||||||
|
All pins NC — no labels needed.
|
||||||
|
|
||||||
|
## MOD1 — simpleRTK2B Pro (Arduino headers)
|
||||||
|
| Pin | Net | Silk |
|
||||||
|
|---|---|---|
|
||||||
|
| 2 | 3V3 | 3V3 |
|
||||||
|
| 5 | SW_5V | 5V |
|
||||||
|
| 6, 7 | GND | GND |
|
||||||
|
| 15 | GNSS_RX | G-RX |
|
||||||
|
| 16 | GNSS_TX | G-TX |
|
||||||
|
| 17 | DOUT_4G | DOUT |
|
||||||
|
| 23 | USART1_RX | U-RX |
|
||||||
|
| 29 | GND | GND |
|
||||||
|
|
||||||
|
---
|
||||||
|
**Anchor labels I already staged** (power/ground, if you want to keep the placement):
|
||||||
|
J1: 3V3 / GND / 5V at pins 18-20 · J2: same at pins 18-20 · J7: 3V3 (pin 1), GND (pin 10) ·
|
||||||
|
MOD1: 3V3 (pin 2), 5V (pin 5), GND (pin 6/7). They're in my memory only — not saved — so
|
||||||
|
just re-create them from this table in KiCad.
|
||||||
233
03-Architecture-Hardware/kicad/DRC.rpt
Normal file
233
03-Architecture-Hardware/kicad/DRC.rpt
Normal file
@ -0,0 +1,233 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T18:20:55 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 33 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 23 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.1725 mm, 25.7025 mm): PTH pad 6 [DIN_4G] of K1
|
||||||
|
@(96.2950 mm, 38.5000 mm): Track [DIN_4G] on In2.Cu, length 18.0984 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(37.2565 mm, 62.5495 mm): Track [BAT_PLUS] on F.Cu, length 4.0456 mm
|
||||||
|
@(41.0500 mm, 51.5500 mm): Pad 23 [BAT_PLUS] of U6 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(115.8806 mm, 89.8806 mm): Track [NRST] on In2.Cu, length 4.4115 mm
|
||||||
|
@(125.5000 mm, 44.2250 mm): Track [NRST] on In2.Cu, length 48.7750 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.6858 mm, 73.1542 mm): Track [SW_5V] on F.Cu, length 0.3807 mm
|
||||||
|
@(119.9050 mm, 72.8850 mm): Pad 2 [SW_5V] of U7 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 55.0000 mm): Pad 6 [VEH5V] of U6 on F.Cu
|
||||||
|
@(43.5000 mm, 54.0000 mm): Pad 16 [VEH5V] of U6 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 55.0000 mm): Pad 6 [VEH5V] of U6 on F.Cu
|
||||||
|
@(31.4500 mm, 56.9683 mm): Track [VEH5V] on F.Cu, length 4.5702 mm
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
88867
03-Architecture-Hardware/kicad/_boardview.svg
Normal file
88867
03-Architecture-Hardware/kicad/_boardview.svg
Normal file
File diff suppressed because it is too large
Load Diff
|
After Width: | Height: | Size: 1.5 MiB |
233
03-Architecture-Hardware/kicad/_drc-after-islands.txt
Normal file
233
03-Architecture-Hardware/kicad/_drc-after-islands.txt
Normal file
@ -0,0 +1,233 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T18:21:31 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 33 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 23 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.1725 mm, 25.7025 mm): PTH pad 6 [DIN_4G] of K1
|
||||||
|
@(96.2950 mm, 38.5000 mm): Track [DIN_4G] on In2.Cu, length 18.0984 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.0000 mm, 0.0000 mm): Zone [GND] on In1.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(37.2565 mm, 62.5495 mm): Track [BAT_PLUS] on F.Cu, length 4.0456 mm
|
||||||
|
@(41.0500 mm, 51.5500 mm): Pad 23 [BAT_PLUS] of U6 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(115.8806 mm, 89.8806 mm): Track [NRST] on In2.Cu, length 4.4115 mm
|
||||||
|
@(125.5000 mm, 44.2250 mm): Track [NRST] on In2.Cu, length 48.7750 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.9550 mm, 72.8850 mm): Pad 7 [SW_5V] of U7 on F.Cu
|
||||||
|
@(119.9050 mm, 72.8850 mm): Pad 2 [SW_5V] of U7 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 55.0000 mm): Pad 6 [VEH5V] of U6 on F.Cu
|
||||||
|
@(43.5000 mm, 54.0000 mm): Pad 16 [VEH5V] of U6 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 55.0000 mm): Pad 6 [VEH5V] of U6 on F.Cu
|
||||||
|
@(31.4500 mm, 57.0000 mm): Track [VEH5V] on F.Cu, length 0.0317 mm
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
296
03-Architecture-Hardware/kicad/_drc-check.txt
Normal file
296
03-Architecture-Hardware/kicad/_drc-check.txt
Normal file
@ -0,0 +1,296 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T21:41:17 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 51 DRC violations **
|
||||||
|
[shorting_items]: Items shorting two nets (nets VEH5V and IGN_SENSE)
|
||||||
|
Local override; error
|
||||||
|
@(25.8500 mm, 51.5800 mm): Track [VEH5V] on B.Cu, length 25.8801 mm
|
||||||
|
@(17.6614 mm, 42.8850 mm): Via [IGN_SENSE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1722 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5400 mm, 54.8000 mm): Track [IGATE] on In2.Cu, length 0.2200 mm
|
||||||
|
@(44.4900 mm, 54.0100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1829 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.4900 mm, 54.0100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.8600 mm, 54.7000 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0909 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.4900 mm, 54.0100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.5400 mm, 54.5800 mm): Track [IGATE] on In2.Cu, length 0.1131 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1829 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.4900 mm, 54.0100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.8600 mm, 54.7000 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0909 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.4600 mm, 54.5000 mm): Track [IGATE] on In2.Cu, length 5.8267 mm
|
||||||
|
@(44.4900 mm, 54.0100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1829 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.4900 mm, 54.0100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.8600 mm, 54.7000 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1900 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.4900 mm, 54.0100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.1800 mm, 54.6000 mm): Track [IGATE] on F.Cu, length 0.3600 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1829 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.4900 mm, 54.0100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.8600 mm, 54.7000 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1921 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5400 mm, 54.6000 mm): Track [IGATE] on F.Cu, length 0.1414 mm
|
||||||
|
@(44.4900 mm, 54.0100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(38.6600 mm, 53.8800 mm): Track [CHRG_EN] on F.Cu, length 0.1838 mm
|
||||||
|
@(39.6000 mm, 53.5000 mm): Track [CLPROG_TP] on F.Cu, length 4.7660 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0288 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.2888 mm, 53.9412 mm): Track [NTC] on In2.Cu, length 1.3945 mm
|
||||||
|
@(44.8600 mm, 54.7000 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[shorting_items]: Items shorting two nets (nets NTC and F0_SEL)
|
||||||
|
Local override; error
|
||||||
|
@(45.2888 mm, 55.3357 mm): Track [NTC] on In2.Cu, length 13.7702 mm
|
||||||
|
@(44.6300 mm, 55.5600 mm): Via [F0_SEL] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1135 mm)
|
||||||
|
Local override; error
|
||||||
|
@(47.4739 mm, 35.3873 mm): Track [I2C_SDA] on B.Cu, length 16.7311 mm
|
||||||
|
@(46.5104 mm, 48.9396 mm): Track [BAT_PLUS] on B.Cu, length 1.6552 mm
|
||||||
|
[shorting_items]: Items shorting two nets (nets I2C_SDA and BAT_PLUS)
|
||||||
|
Local override; error
|
||||||
|
@(47.4739 mm, 35.3873 mm): Track [I2C_SDA] on B.Cu, length 16.7311 mm
|
||||||
|
@(46.6900 mm, 48.9396 mm): Track [BAT_PLUS] on B.Cu, length 0.1796 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0907 mm)
|
||||||
|
Local override; error
|
||||||
|
@(38.4339 mm, 50.0333 mm): Track [24V_IN] on In2.Cu, length 7.7473 mm
|
||||||
|
@(39.1000 mm, 49.3000 mm): Via [BAT_PLUS] on F.Cu - B.Cu
|
||||||
|
[shorting_items]: Items shorting two nets (nets BAT_PLUS and IGN_IN)
|
||||||
|
Local override; error
|
||||||
|
@(46.6900 mm, 48.9396 mm): Via [BAT_PLUS] on F.Cu - B.Cu
|
||||||
|
@(31.3535 mm, 48.6297 mm): Track [IGN_IN] on In2.Cu, length 22.2014 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[via_dangling]: Via is not connected or connected on only one layer
|
||||||
|
Local override; warning
|
||||||
|
@(63.0600 mm, 44.1600 mm): Via [BAT_PLUS] on F.Cu - B.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 21 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.1725 mm, 25.7025 mm): PTH pad 6 [DIN_4G] of K1
|
||||||
|
@(96.2950 mm, 38.5000 mm): Track [DIN_4G] on In2.Cu, length 18.0984 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on In1.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(115.8806 mm, 89.8806 mm): Track [NRST] on In2.Cu, length 4.4115 mm
|
||||||
|
@(125.5000 mm, 44.2250 mm): Track [NRST] on In2.Cu, length 48.7750 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.6858 mm, 73.1542 mm): Track [SW_5V] on F.Cu, length 0.3807 mm
|
||||||
|
@(119.9050 mm, 72.8850 mm): Pad 2 [SW_5V] of U7 on F.Cu
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
209
03-Architecture-Hardware/kicad/_drc-clean.txt
Normal file
209
03-Architecture-Hardware/kicad/_drc-clean.txt
Normal file
@ -0,0 +1,209 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T22:42:11 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 35 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 53.5000 mm): Track [CLPROG_TP] on F.Cu, length 4.7660 mm
|
||||||
|
@(37.4500 mm, 53.8800 mm): Track [CHRG_EN] on F.Cu, length 0.1697 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1981 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.9600 mm, 54.6700 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
@(45.1731 mm, 55.3028 mm): Track [F0_SEL] on B.Cu, length 1.3848 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.2515 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.1414 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.7898 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.5383 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.1515 mm, 53.5000 mm): Track [NTC] on F.Cu, length 0.6515 mm
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 15 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
220
03-Architecture-Hardware/kicad/_drc-done.txt
Normal file
220
03-Architecture-Hardware/kicad/_drc-done.txt
Normal file
@ -0,0 +1,220 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T22:23:40 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 36 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.1515 mm, 53.5000 mm): Track [NTC] on F.Cu, length 0.6515 mm
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.2515 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.1414 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.7898 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.5383 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1981 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.9600 mm, 54.6700 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
@(45.1731 mm, 55.3028 mm): Track [F0_SEL] on B.Cu, length 1.3848 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(38.6600 mm, 53.8800 mm): Track [CHRG_EN] on F.Cu, length 0.1838 mm
|
||||||
|
@(39.6000 mm, 53.5000 mm): Track [CLPROG_TP] on F.Cu, length 4.7660 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[via_dangling]: Via is not connected or connected on only one layer
|
||||||
|
Local override; warning
|
||||||
|
@(63.0600 mm, 44.1600 mm): Via [BAT_PLUS] on F.Cu - B.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 17 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
217
03-Architecture-Hardware/kicad/_drc-filled.txt
Normal file
217
03-Architecture-Hardware/kicad/_drc-filled.txt
Normal file
@ -0,0 +1,217 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T22:34:19 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 35 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1981 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.9600 mm, 54.6700 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
@(45.1731 mm, 55.3028 mm): Track [F0_SEL] on B.Cu, length 1.3848 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 53.5000 mm): Track [CLPROG_TP] on F.Cu, length 4.7660 mm
|
||||||
|
@(37.4500 mm, 53.8800 mm): Track [CHRG_EN] on F.Cu, length 1.2100 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.1515 mm, 53.5000 mm): Track [NTC] on F.Cu, length 0.6515 mm
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.2515 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.1414 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.7898 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.5383 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 17 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
217
03-Architecture-Hardware/kicad/_drc-final-check.txt
Normal file
217
03-Architecture-Hardware/kicad/_drc-final-check.txt
Normal file
@ -0,0 +1,217 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T22:30:21 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 35 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.7898 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.5383 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.2515 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.1414 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.1515 mm, 53.5000 mm): Track [NTC] on F.Cu, length 0.6515 mm
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1981 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.9600 mm, 54.6700 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
@(45.1731 mm, 55.3028 mm): Track [F0_SEL] on B.Cu, length 1.3848 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 53.5000 mm): Track [CLPROG_TP] on F.Cu, length 4.7660 mm
|
||||||
|
@(37.4500 mm, 53.8800 mm): Track [CHRG_EN] on F.Cu, length 1.2100 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 17 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
233
03-Architecture-Hardware/kicad/_drc-guide.txt
Normal file
233
03-Architecture-Hardware/kicad/_drc-guide.txt
Normal file
@ -0,0 +1,233 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T18:30:24 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 33 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 23 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.1725 mm, 25.7025 mm): PTH pad 6 [DIN_4G] of K1
|
||||||
|
@(96.2950 mm, 38.5000 mm): Track [DIN_4G] on In2.Cu, length 18.0984 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(37.2565 mm, 62.5495 mm): Track [BAT_PLUS] on F.Cu, length 4.0456 mm
|
||||||
|
@(41.0500 mm, 51.5500 mm): Pad 23 [BAT_PLUS] of U6 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(115.8806 mm, 89.8806 mm): Track [NRST] on In2.Cu, length 4.4115 mm
|
||||||
|
@(125.5000 mm, 44.2250 mm): Track [NRST] on In2.Cu, length 48.7750 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.6858 mm, 73.1542 mm): Track [SW_5V] on F.Cu, length 0.3807 mm
|
||||||
|
@(119.9050 mm, 72.8850 mm): Pad 2 [SW_5V] of U7 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 55.0000 mm): Pad 6 [VEH5V] of U6 on F.Cu
|
||||||
|
@(43.5000 mm, 54.0000 mm): Pad 16 [VEH5V] of U6 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 55.0000 mm): Pad 6 [VEH5V] of U6 on F.Cu
|
||||||
|
@(31.4500 mm, 56.9683 mm): Track [VEH5V] on F.Cu, length 4.5702 mm
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
240
03-Architecture-Hardware/kicad/_drc-noshort.txt
Normal file
240
03-Architecture-Hardware/kicad/_drc-noshort.txt
Normal file
@ -0,0 +1,240 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T21:59:49 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 37 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.2515 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.1414 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1981 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.9600 mm, 54.6700 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
@(45.1731 mm, 55.3028 mm): Track [F0_SEL] on B.Cu, length 1.3848 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 53.5000 mm): Track [CLPROG_TP] on F.Cu, length 4.7660 mm
|
||||||
|
@(37.4500 mm, 53.8800 mm): Track [CHRG_EN] on F.Cu, length 0.1697 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[via_dangling]: Via is not connected or connected on only one layer
|
||||||
|
Local override; warning
|
||||||
|
@(63.0600 mm, 44.1600 mm): Via [BAT_PLUS] on F.Cu - B.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 21 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.1725 mm, 25.7025 mm): PTH pad 6 [DIN_4G] of K1
|
||||||
|
@(96.2950 mm, 38.5000 mm): Track [DIN_4G] on In2.Cu, length 18.0984 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(115.8806 mm, 89.8806 mm): Track [NRST] on In2.Cu, length 4.4115 mm
|
||||||
|
@(125.5000 mm, 44.2250 mm): Track [NRST] on In2.Cu, length 48.7750 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.6858 mm, 73.1542 mm): Track [SW_5V] on F.Cu, length 0.3807 mm
|
||||||
|
@(119.9050 mm, 72.8850 mm): Pad 2 [SW_5V] of U7 on F.Cu
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
232
03-Architecture-Hardware/kicad/_drc-opens.txt
Normal file
232
03-Architecture-Hardware/kicad/_drc-opens.txt
Normal file
@ -0,0 +1,232 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T22:20:29 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 38 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.1515 mm, 53.5000 mm): Track [NTC] on F.Cu, length 0.6515 mm
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.2515 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.1414 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.7898 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.5383 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1981 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.9600 mm, 54.6700 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
@(45.1731 mm, 55.3028 mm): Track [F0_SEL] on B.Cu, length 1.3848 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(38.6600 mm, 53.8800 mm): Track [CHRG_EN] on F.Cu, length 0.1838 mm
|
||||||
|
@(39.6000 mm, 53.5000 mm): Track [CLPROG_TP] on F.Cu, length 4.7660 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[via_dangling]: Via is not connected or connected on only one layer
|
||||||
|
Local override; warning
|
||||||
|
@(63.0600 mm, 44.1600 mm): Via [BAT_PLUS] on F.Cu - B.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 18 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
580
03-Architecture-Hardware/kicad/_drc-postU6.txt
Normal file
580
03-Architecture-Hardware/kicad/_drc-postU6.txt
Normal file
@ -0,0 +1,580 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T20:38:11 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 64 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1536 mm)
|
||||||
|
Local override; error
|
||||||
|
@(39.0381 mm, 54.4381 mm): Track [VEH5V] on F.Cu, length 0.7946 mm
|
||||||
|
@(41.0500 mm, 54.5000 mm): Track [GND] on F.Cu, length 1.4500 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0038 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.7048 mm, 52.8962 mm): Track [FAN_RET] on B.Cu, length 0.8297 mm
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0553 mm)
|
||||||
|
Local override; error
|
||||||
|
@(48.0632 mm, 53.1202 mm): Track [FAN_RET] on B.Cu, length 2.1344 mm
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0546 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
@(45.9288 mm, 53.1202 mm): Track [FAN_RET] on B.Cu, length 0.3168 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0713 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
@(44.7324 mm, 53.0389 mm): Track [FAN_RET] on B.Cu, length 9.0700 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0713 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.8751 mm, 52.8962 mm): Track [FAN_RET] on B.Cu, length 0.2018 mm
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1752 mm)
|
||||||
|
Local override; error
|
||||||
|
@(39.9748 mm, 50.7227 mm): Track [MAIN5V] on F.Cu, length 0.1996 mm
|
||||||
|
@(41.0000 mm, 50.2300 mm): Track [BAT_PLUS] on F.Cu, length 1.2700 mm
|
||||||
|
[shorting_items]: Items shorting two nets (nets I2C_SDA and BAT_PLUS)
|
||||||
|
Local override; error
|
||||||
|
@(47.4739 mm, 35.3873 mm): Track [I2C_SDA] on B.Cu, length 16.7311 mm
|
||||||
|
@(46.6900 mm, 48.9396 mm): Track [BAT_PLUS] on B.Cu, length 0.1796 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0671 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1135 mm)
|
||||||
|
Local override; error
|
||||||
|
@(47.4739 mm, 35.3873 mm): Track [I2C_SDA] on B.Cu, length 16.7311 mm
|
||||||
|
@(46.5104 mm, 48.9396 mm): Track [BAT_PLUS] on B.Cu, length 1.6552 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0671 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0671 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0671 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1194 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.2888 mm, 55.3357 mm): Track [NTC] on In2.Cu, length 13.7702 mm
|
||||||
|
@(44.4400 mm, 55.4500 mm): Via [F0_SEL] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0662 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(45.3000 mm, 53.7000 mm): Track [NTC] on In2.Cu, length 0.2300 mm
|
||||||
|
[shorting_items]: Items shorting two nets (nets VEH5V and NTC)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(45.2888 mm, 53.9412 mm): Track [NTC] on In2.Cu, length 1.3945 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0505 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(45.3000 mm, 53.9300 mm): Track [NTC] on In2.Cu, length 0.0158 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1595 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.5400 mm, 54.8000 mm): Track [IGATE] on F.Cu, length 0.2200 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0943 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.5700 mm, 54.8300 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0943 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.5700 mm, 54.8300 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1595 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.5400 mm, 54.5800 mm): Track [IGATE] on In2.Cu, length 0.1131 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1595 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.5400 mm, 54.5800 mm): Track [IGATE] on F.Cu, length 0.1131 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0943 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.5700 mm, 54.8300 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1595 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5400 mm, 54.8000 mm): Track [IGATE] on In2.Cu, length 0.2200 mm
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0335 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5700 mm, 54.8300 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
@(44.4400 mm, 55.4500 mm): Via [F0_SEL] on F.Cu - B.Cu
|
||||||
|
[shorting_items]: Items shorting two nets (nets VEH5V and GND)
|
||||||
|
Local override; error
|
||||||
|
@(39.0381 mm, 54.4381 mm): Track [VEH5V] on F.Cu, length 0.7946 mm
|
||||||
|
@(39.6000 mm, 54.5000 mm): Pad 5 [GND] of U6 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0369 mm)
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 54.5000 mm): Pad 5 [GND] of U6 on F.Cu
|
||||||
|
@(37.8781 mm, 54.4381 mm): Track [VEH5V] on F.Cu, length 1.1600 mm
|
||||||
|
[shorting_items]: Items shorting two nets (nets VEH5V and IGN_SENSE)
|
||||||
|
Local override; error
|
||||||
|
@(25.8500 mm, 51.5800 mm): Track [VEH5V] on B.Cu, length 25.8801 mm
|
||||||
|
@(17.6614 mm, 42.8850 mm): Via [IGN_SENSE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1100 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5700 mm, 54.8300 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
@(44.5488 mm, 54.1300 mm): Track [VEH5V] on B.Cu, length 0.9333 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0907 mm)
|
||||||
|
Local override; error
|
||||||
|
@(38.8044 mm, 50.4038 mm): Track [24V_IN] on In2.Cu, length 0.5240 mm
|
||||||
|
@(39.1000 mm, 49.3000 mm): Via [BAT_PLUS] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0907 mm)
|
||||||
|
Local override; error
|
||||||
|
@(38.4339 mm, 50.0333 mm): Track [24V_IN] on In2.Cu, length 7.7473 mm
|
||||||
|
@(39.1000 mm, 49.3000 mm): Via [BAT_PLUS] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(38.6600 mm, 53.8800 mm): Track [CHRG_EN] on F.Cu, length 0.1838 mm
|
||||||
|
@(39.6000 mm, 53.5000 mm): Track [CLPROG_TP] on F.Cu, length 4.7660 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1047 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.0948 mm, 55.0000 mm): Track [F0_SEL] on F.Cu, length 0.5948 mm
|
||||||
|
@(44.5700 mm, 54.8300 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1033 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5700 mm, 54.8300 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
@(44.3976 mm, 55.4076 mm): Track [F0_SEL] on F.Cu, length 0.1048 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0562 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5700 mm, 54.8300 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
@(44.3976 mm, 55.3028 mm): Track [F0_SEL] on F.Cu, length 0.4282 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0731 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5872 mm, 55.3028 mm): Track [F0_SEL] on B.Cu, length 0.5859 mm
|
||||||
|
@(44.5700 mm, 54.8300 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0731 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.4400 mm, 55.4500 mm): Track [F0_SEL] on B.Cu, length 0.2082 mm
|
||||||
|
@(44.5700 mm, 54.8300 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[shorting_items]: Items shorting two nets (nets BAT_PLUS and IGN_IN)
|
||||||
|
Local override; error
|
||||||
|
@(46.6900 mm, 48.9396 mm): Via [BAT_PLUS] on F.Cu - B.Cu
|
||||||
|
@(31.3535 mm, 48.6297 mm): Track [IGN_IN] on In2.Cu, length 22.2014 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
|
||||||
|
Rule: board setup solder mask min width; error
|
||||||
|
@(39.0381 mm, 54.4381 mm): Track [VEH5V] on F.Cu, length 0.7946 mm
|
||||||
|
@(39.6000 mm, 54.5000 mm): Pad 5 [GND] of U6 on F.Cu
|
||||||
|
[via_dangling]: Via is not connected or connected on only one layer
|
||||||
|
Local override; warning
|
||||||
|
@(20.9500 mm, 58.0000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[via_dangling]: Via is not connected or connected on only one layer
|
||||||
|
Local override; warning
|
||||||
|
@(114.9550 mm, 70.3450 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[via_dangling]: Via is not connected or connected on only one layer
|
||||||
|
Local override; warning
|
||||||
|
@(97.7250 mm, 5.0000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[via_dangling]: Via is not connected or connected on only one layer
|
||||||
|
Local override; warning
|
||||||
|
@(19.8250 mm, 54.0000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[via_dangling]: Via is not connected or connected on only one layer
|
||||||
|
Local override; warning
|
||||||
|
@(63.0600 mm, 44.1600 mm): Via [BAT_PLUS] on F.Cu - B.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 80 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.1725 mm, 25.7025 mm): PTH pad 6 [DIN_4G] of K1
|
||||||
|
@(96.2950 mm, 38.5000 mm): Track [DIN_4G] on In2.Cu, length 18.0984 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(5.8250 mm, 21.0000 mm): Pad 2 [GND] of Rrp on F.Cu
|
||||||
|
@(13.1500 mm, 21.5000 mm): Pad 2 [GND] of D10 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(11.6250 mm, 66.4500 mm): Pad 2 [GND] of Q4 on F.Cu
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(12.2000 mm, 31.5000 mm): Pad 2 [GND] of C10 on F.Cu
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(12.2000 mm, 31.5000 mm): Pad 2 [GND] of C10 on F.Cu
|
||||||
|
@(13.1500 mm, 21.5000 mm): Pad 2 [GND] of D10 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(13.1500 mm, 21.5000 mm): Pad 2 [GND] of D10 on F.Cu
|
||||||
|
@(20.5000 mm, 6.0000 mm): PTH pad 2 [GND] of P5
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(19.3750 mm, 72.0000 mm): Pad 2 [GND] of R6 on F.Cu
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(19.8250 mm, 54.0000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(20.9500 mm, 58.0000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(20.5000 mm, 6.0000 mm): PTH pad 2 [GND] of P5
|
||||||
|
@(31.0000 mm, 11.0800 mm): PTH pad 3 [GND] of H3
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(22.1750 mm, 43.0000 mm): Pad 2 [GND] of C9 on F.Cu
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(22.1750 mm, 43.0000 mm): Pad 2 [GND] of C9 on F.Cu
|
||||||
|
@(19.8250 mm, 54.0000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(25.0625 mm, 56.9500 mm): Pad 2 [GND] of Q2 on F.Cu
|
||||||
|
@(20.9500 mm, 58.0000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(25.0625 mm, 56.9500 mm): Pad 2 [GND] of Q2 on F.Cu
|
||||||
|
@(29.0000 mm, 62.0000 mm): Pad 2 [GND] of R52 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(27.5500 mm, 72.0000 mm): Pad 2 [GND] of R8 on F.Cu
|
||||||
|
@(26.5000 mm, 67.0000 mm): Pad 2 [GND] of R56 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(27.5500 mm, 72.0000 mm): Pad 2 [GND] of R8 on F.Cu
|
||||||
|
@(19.3750 mm, 72.0000 mm): Pad 2 [GND] of R6 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(29.0000 mm, 62.0000 mm): Pad 2 [GND] of R52 on F.Cu
|
||||||
|
@(26.5000 mm, 67.0000 mm): Pad 2 [GND] of R56 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(31.0000 mm, 11.0800 mm): PTH pad 3 [GND] of H3
|
||||||
|
@(41.0000 mm, 6.0000 mm): PTH pad 3 [GND] of P13
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(33.0000 mm, 57.0000 mm): Pad 2 [GND] of C31 on F.Cu
|
||||||
|
@(33.0000 mm, 62.0000 mm): Pad 2 [GND] of R50 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(33.0000 mm, 62.0000 mm): Pad 2 [GND] of R50 on F.Cu
|
||||||
|
@(29.0000 mm, 62.0000 mm): Pad 2 [GND] of R52 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
@(22.1750 mm, 43.0000 mm): Pad 2 [GND] of C9 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 54.5000 mm): Pad 5 [GND] of U6 on F.Cu
|
||||||
|
@(33.0000 mm, 57.0000 mm): Pad 2 [GND] of C31 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(41.0000 mm, 6.0000 mm): PTH pad 3 [GND] of P13
|
||||||
|
@(49.5000 mm, 6.0000 mm): PTH pad 2 [GND] of P2
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(41.9500 mm, 64.0000 mm): Pad 2 [GND] of C32 on F.Cu
|
||||||
|
@(33.0000 mm, 62.0000 mm): Pad 2 [GND] of R50 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(47.4500 mm, 64.0000 mm): Pad 2 [GND] of C33 on F.Cu
|
||||||
|
@(41.9500 mm, 64.0000 mm): Pad 2 [GND] of C32 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(47.7600 mm, 89.2600 mm): PTH pad 6 [GND] of MOD1
|
||||||
|
@(50.3000 mm, 89.2600 mm): PTH pad 7 [GND] of MOD1
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.3000 mm, 89.2600 mm): PTH pad 7 [GND] of MOD1
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(50.9500 mm, 56.0000 mm): Pad 2 [GND] of C35 on F.Cu
|
||||||
|
@(55.5000 mm, 55.0000 mm): Pad 2 [GND] of R54 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(50.9500 mm, 56.0000 mm): Pad 2 [GND] of C35 on F.Cu
|
||||||
|
@(51.7500 mm, 64.0000 mm): Pad 2 [GND] of C34 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(51.7500 mm, 64.0000 mm): Pad 2 [GND] of C34 on F.Cu
|
||||||
|
@(47.4500 mm, 64.0000 mm): Pad 2 [GND] of C33 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(51.7500 mm, 64.0000 mm): Pad 2 [GND] of C34 on F.Cu
|
||||||
|
@(53.5000 mm, 72.0000 mm): Pad 2 [GND] of Cu3 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(53.5000 mm, 72.0000 mm): Pad 2 [GND] of Cu3 on F.Cu
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(57.5000 mm, 72.0000 mm): Pad 2 [GND] of Cu4 on F.Cu
|
||||||
|
@(53.5000 mm, 72.0000 mm): Pad 2 [GND] of Cu3 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(59.9000 mm, 54.5000 mm): Pad 1 [GND] of JP3 on F.Cu
|
||||||
|
@(55.5000 mm, 55.0000 mm): Pad 2 [GND] of R54 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(59.9000 mm, 54.5000 mm): Pad 1 [GND] of JP3 on F.Cu
|
||||||
|
@(62.5000 mm, 50.0000 mm): Pad 3 [GND] of JP2 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(62.5000 mm, 59.5000 mm): Pad 3 [GND] of JP4 on F.Cu
|
||||||
|
@(59.9000 mm, 54.5000 mm): Pad 1 [GND] of JP3 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(72.7200 mm, 16.0000 mm): PTH pad 19 [GND] of J1
|
||||||
|
@(65.6250 mm, 24.9500 mm): Pad 2 [GND] of Q5 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
@(65.6250 mm, 24.9500 mm): Pad 2 [GND] of Q5 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
@(62.5000 mm, 50.0000 mm): Pad 3 [GND] of JP2 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(74.5000 mm, 5.5000 mm): Pad 2 [GND] of C3 on F.Cu
|
||||||
|
@(81.5000 mm, 3.5000 mm): Pad 2 [GND] of C22 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
@(72.7200 mm, 16.0000 mm): PTH pad 19 [GND] of J1
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(82.7750 mm, 10.9000 mm): Pad 2 [GND] of C11 on F.Cu
|
||||||
|
@(86.5500 mm, 10.5000 mm): Pad 5 [GND] of U2 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(82.7750 mm, 10.9000 mm): Pad 2 [GND] of C11 on F.Cu
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(82.7750 mm, 10.9000 mm): Pad 2 [GND] of C11 on F.Cu
|
||||||
|
@(81.5000 mm, 3.5000 mm): Pad 2 [GND] of C22 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(88.0000 mm, 27.5000 mm): Pad 2 [GND] of Dbk on F.Cu
|
||||||
|
@(98.8250 mm, 24.5000 mm): Pad 2 [GND] of R41 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(89.0250 mm, 12.4050 mm): Pad 9 [GND] of U2 on F.Cu
|
||||||
|
@(86.5500 mm, 10.5000 mm): Pad 5 [GND] of U2 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(89.0250 mm, 12.4050 mm): Pad 9 [GND] of U2 on F.Cu
|
||||||
|
@(95.6500 mm, 13.9250 mm): Pad 2 [GND] of Ccomp on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(95.6500 mm, 13.9250 mm): Pad 2 [GND] of Ccomp on F.Cu
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(97.5000 mm, 93.5000 mm): PTH pad 2 [GND] of P1
|
||||||
|
@(107.7000 mm, 82.0000 mm): Pad 2 [GND] of C43 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(98.8250 mm, 19.0000 mm): Pad 2 [GND] of Ren2 on F.Cu
|
||||||
|
@(98.8250 mm, 24.5000 mm): Pad 2 [GND] of R41 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(98.8250 mm, 19.0000 mm): Pad 2 [GND] of Ren2 on F.Cu
|
||||||
|
@(95.6500 mm, 13.9250 mm): Pad 2 [GND] of Ccomp on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(98.8250 mm, 24.5000 mm): Pad 2 [GND] of R41 on F.Cu
|
||||||
|
@(102.0625 mm, 23.9500 mm): Pad 2 [GND] of Q6 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(99.5000 mm, 56.9500 mm): Pad 2 [GND] of C40 on F.Cu
|
||||||
|
@(94.0000 mm, 52.5000 mm): PTH pad 10 [GND] of J7
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(99.5000 mm, 56.9500 mm): Pad 2 [GND] of C40 on F.Cu
|
||||||
|
@(100.1500 mm, 67.0000 mm): Pad 2 [GND] of R61 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(100.1500 mm, 71.5000 mm): Pad 2 [GND] of Rfreq2 on F.Cu
|
||||||
|
@(100.1500 mm, 67.0000 mm): Pad 2 [GND] of R61 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
@(97.7250 mm, 5.0000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
@(113.1250 mm, 4.0000 mm): Pad 1 [GND] of DB1 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(107.7000 mm, 82.0000 mm): Pad 2 [GND] of C43 on F.Cu
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(107.7000 mm, 82.0000 mm): Pad 2 [GND] of C43 on F.Cu
|
||||||
|
@(119.0000 mm, 97.5000 mm): PTH pad 2 [GND] of SW1
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
@(114.9550 mm, 70.3450 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
@(100.1500 mm, 71.5000 mm): Pad 2 [GND] of Rfreq2 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(113.1250 mm, 4.0000 mm): Pad 1 [GND] of DB1 on F.Cu
|
||||||
|
@(117.1250 mm, 4.0000 mm): Pad 1 [GND] of DB2 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.9550 mm, 70.3450 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(117.4300 mm, 72.2500 mm): Pad 9 [GND] of U7 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(118.5000 mm, 63.9000 mm): Pad 2 [GND] of C41 on F.Cu
|
||||||
|
@(114.9550 mm, 70.3450 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(118.5000 mm, 63.9000 mm): Pad 2 [GND] of C41 on F.Cu
|
||||||
|
@(110.3000 mm, 63.5000 mm): Pad 2 [GND] of Dbk2 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(119.0000 mm, 97.5000 mm): PTH pad 2 [GND] of SW1
|
||||||
|
@(125.5000 mm, 97.5000 mm): PTH pad 2 [GND] of SW1
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(121.1250 mm, 4.0000 mm): Pad 1 [GND] of DB3 on F.Cu
|
||||||
|
@(117.1250 mm, 4.0000 mm): Pad 1 [GND] of DB2 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(121.1250 mm, 4.0000 mm): Pad 1 [GND] of DB3 on F.Cu
|
||||||
|
@(125.1250 mm, 4.0000 mm): Pad 1 [GND] of DB4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(129.9750 mm, 37.2500 mm): PTH pad 2 [GND] of P10
|
||||||
|
@(130.0000 mm, 16.5000 mm): PTH pad 3 [GND] of P6
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(130.0000 mm, 16.5000 mm): PTH pad 3 [GND] of P6
|
||||||
|
@(125.1250 mm, 4.0000 mm): Pad 1 [GND] of DB4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(130.0000 mm, 52.5000 mm): PTH pad 2 [GND] of P3
|
||||||
|
@(129.9750 mm, 37.2500 mm): PTH pad 2 [GND] of P10
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
@(118.5000 mm, 63.9000 mm): Pad 2 [GND] of C41 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
@(130.0000 mm, 52.5000 mm): PTH pad 2 [GND] of P3
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(130.0000 mm, 78.5000 mm): PTH pad 2 [GND] of P12
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(115.8806 mm, 89.8806 mm): Track [NRST] on In2.Cu, length 4.4115 mm
|
||||||
|
@(125.5000 mm, 93.0000 mm): PTH pad 1 [NRST] of SW1
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.6858 mm, 73.1542 mm): Track [SW_5V] on F.Cu, length 0.3807 mm
|
||||||
|
@(119.9050 mm, 72.8850 mm): Pad 2 [SW_5V] of U7 on F.Cu
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
209
03-Architecture-Hardware/kicad/_drc-postshift.txt
Normal file
209
03-Architecture-Hardware/kicad/_drc-postshift.txt
Normal file
@ -0,0 +1,209 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-05T15:21:00 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 35 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(124.3431 mm, 93.8231 mm): Track [NTC] on F.Cu, length 0.6515 mm
|
||||||
|
@(124.6916 mm, 94.3031 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1981 mm)
|
||||||
|
Local override; error
|
||||||
|
@(125.1517 mm, 94.9931 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
@(125.3648 mm, 95.6259 mm): Track [F0_SEL] on B.Cu, length 1.3848 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(119.7917 mm, 93.8231 mm): Track [CLPROG_TP] on F.Cu, length 4.7660 mm
|
||||||
|
@(117.6416 mm, 94.2031 mm): Track [CHRG_EN] on F.Cu, length 0.1697 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(124.6916 mm, 94.3031 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(124.9814 mm, 93.7231 mm): Track [NTC] on F.Cu, length 0.5383 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(124.6916 mm, 94.3031 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(124.4431 mm, 93.7231 mm): Track [NTC] on F.Cu, length 0.1414 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(129.4792 mm, 117.8231 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(129.4792 mm, 118.3231 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(129.4792 mm, 118.3231 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(129.4792 mm, 118.8231 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(130.9041 mm, 118.8231 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(130.9041 mm, 118.3231 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(130.9041 mm, 118.3231 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(130.9041 mm, 117.8231 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(152.9117 mm, 74.1031 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(210.1917 mm, 105.8231 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(113.7317 mm, 81.3231 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(188.7416 mm, 114.8231 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(96.9667 mm, 116.3231 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(96.2417 mm, 112.3231 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(161.1360 mm, 54.7302 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(92.9667 mm, 116.3231 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(119.6916 mm, 112.3231 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(180.6917 mm, 51.2231 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(210.1917 mm, 61.8231 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(210.1667 mm, 80.0731 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(124.1916 mm, 118.3231 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(85.1916 mm, 135.3231 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(211.1917 mm, 135.3231 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(210.1667 mm, 70.8231 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(172.6917 mm, 133.8231 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(211.1917 mm, 45.3231 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(85.1916 mm, 45.3231 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(98.9544 mm, 93.8006 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(99.1916 mm, 92.8931 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(130.1917 mm, 116.6731 mm): Reference field of U4
|
||||||
|
@(129.4717 mm, 117.3831 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(211.1917 mm, 135.3231 mm): Reference field of MH4
|
||||||
|
@(211.1917 mm, 135.3231 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(85.1916 mm, 45.3231 mm): Reference field of MH1
|
||||||
|
@(85.1916 mm, 45.3231 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(211.1917 mm, 45.3231 mm): Reference field of MH2
|
||||||
|
@(211.1917 mm, 45.3231 mm): NPTH pad of MH2
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(85.1916 mm, 135.3231 mm): Reference field of MH3
|
||||||
|
@(85.1916 mm, 135.3231 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(150.3416 mm, 48.5231 mm): Reference field of C3
|
||||||
|
@(149.3291 mm, 46.3231 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
|
||||||
|
** Found 15 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(129.4792 mm, 118.3231 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(130.9041 mm, 118.8231 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(214.7716 mm, 40.6231 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
356
03-Architecture-Hardware/kicad/_drc-refilled.txt
Normal file
356
03-Architecture-Hardware/kicad/_drc-refilled.txt
Normal file
@ -0,0 +1,356 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T20:40:32 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 66 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1536 mm)
|
||||||
|
Local override; error
|
||||||
|
@(39.0381 mm, 54.4381 mm): Track [VEH5V] on F.Cu, length 0.7946 mm
|
||||||
|
@(41.0500 mm, 54.5000 mm): Track [GND] on F.Cu, length 1.4500 mm
|
||||||
|
[shorting_items]: Items shorting two nets (nets VEH5V and IGN_SENSE)
|
||||||
|
Local override; error
|
||||||
|
@(25.8500 mm, 51.5800 mm): Track [VEH5V] on B.Cu, length 25.8801 mm
|
||||||
|
@(17.6614 mm, 42.8850 mm): Via [IGN_SENSE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0713 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.8751 mm, 52.8962 mm): Track [FAN_RET] on B.Cu, length 0.2018 mm
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0038 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.7048 mm, 52.8962 mm): Track [FAN_RET] on B.Cu, length 0.8297 mm
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0553 mm)
|
||||||
|
Local override; error
|
||||||
|
@(48.0632 mm, 53.1202 mm): Track [FAN_RET] on B.Cu, length 2.1344 mm
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0713 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
@(44.7324 mm, 53.0389 mm): Track [FAN_RET] on B.Cu, length 9.0700 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0546 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
@(45.9288 mm, 53.1202 mm): Track [FAN_RET] on B.Cu, length 0.3168 mm
|
||||||
|
[shorting_items]: Items shorting two nets (nets VEH5V and NTC)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(45.2888 mm, 53.9412 mm): Track [NTC] on In2.Cu, length 1.3945 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0505 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(45.3000 mm, 53.9300 mm): Track [NTC] on In2.Cu, length 0.0158 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1194 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.2888 mm, 55.3357 mm): Track [NTC] on In2.Cu, length 13.7702 mm
|
||||||
|
@(44.4400 mm, 55.4500 mm): Via [F0_SEL] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0662 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(45.3000 mm, 53.7000 mm): Track [NTC] on In2.Cu, length 0.2300 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1595 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.5400 mm, 54.8000 mm): Track [IGATE] on F.Cu, length 0.2200 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1595 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5400 mm, 54.8000 mm): Track [IGATE] on In2.Cu, length 0.2200 mm
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[shorting_items]: Items shorting two nets (nets VEH5V and GND)
|
||||||
|
Local override; error
|
||||||
|
@(39.0381 mm, 54.4381 mm): Track [VEH5V] on F.Cu, length 0.7946 mm
|
||||||
|
@(39.6000 mm, 54.5000 mm): Pad 5 [GND] of U6 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0369 mm)
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 54.5000 mm): Pad 5 [GND] of U6 on F.Cu
|
||||||
|
@(37.8781 mm, 54.4381 mm): Track [VEH5V] on F.Cu, length 1.1600 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(38.6600 mm, 53.8800 mm): Track [CHRG_EN] on F.Cu, length 0.1838 mm
|
||||||
|
@(39.6000 mm, 53.5000 mm): Track [CLPROG_TP] on F.Cu, length 4.7660 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1595 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.5400 mm, 54.5800 mm): Track [IGATE] on In2.Cu, length 0.1131 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0943 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.5700 mm, 54.8300 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0943 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.5700 mm, 54.8300 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0943 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.5700 mm, 54.8300 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1595 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.5400 mm, 54.5800 mm): Track [IGATE] on F.Cu, length 0.1131 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0335 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5700 mm, 54.8300 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
@(44.4400 mm, 55.4500 mm): Via [F0_SEL] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0671 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1135 mm)
|
||||||
|
Local override; error
|
||||||
|
@(47.4739 mm, 35.3873 mm): Track [I2C_SDA] on B.Cu, length 16.7311 mm
|
||||||
|
@(46.5104 mm, 48.9396 mm): Track [BAT_PLUS] on B.Cu, length 1.6552 mm
|
||||||
|
[shorting_items]: Items shorting two nets (nets I2C_SDA and BAT_PLUS)
|
||||||
|
Local override; error
|
||||||
|
@(47.4739 mm, 35.3873 mm): Track [I2C_SDA] on B.Cu, length 16.7311 mm
|
||||||
|
@(46.6900 mm, 48.9396 mm): Track [BAT_PLUS] on B.Cu, length 0.1796 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1752 mm)
|
||||||
|
Local override; error
|
||||||
|
@(39.9748 mm, 50.7227 mm): Track [MAIN5V] on F.Cu, length 0.1996 mm
|
||||||
|
@(41.0000 mm, 50.2300 mm): Track [BAT_PLUS] on F.Cu, length 1.2700 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0671 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0671 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
[shorting_items]: Items shorting two nets (nets BAT_PLUS and IGN_IN)
|
||||||
|
Local override; error
|
||||||
|
@(46.6900 mm, 48.9396 mm): Via [BAT_PLUS] on F.Cu - B.Cu
|
||||||
|
@(31.3535 mm, 48.6297 mm): Track [IGN_IN] on In2.Cu, length 22.2014 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0907 mm)
|
||||||
|
Local override; error
|
||||||
|
@(38.4339 mm, 50.0333 mm): Track [24V_IN] on In2.Cu, length 7.7473 mm
|
||||||
|
@(39.1000 mm, 49.3000 mm): Via [BAT_PLUS] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0671 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.0300 mm, 54.3100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(45.3000 mm, 53.7000 mm): Via [NTC] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
|
||||||
|
Rule: board setup solder mask min width; error
|
||||||
|
@(39.0381 mm, 54.4381 mm): Track [VEH5V] on F.Cu, length 0.7946 mm
|
||||||
|
@(39.6000 mm, 54.5000 mm): Pad 5 [GND] of U6 on F.Cu
|
||||||
|
[via_dangling]: Via is not connected or connected on only one layer
|
||||||
|
Local override; warning
|
||||||
|
@(63.0600 mm, 44.1600 mm): Via [BAT_PLUS] on F.Cu - B.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 21 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.1725 mm, 25.7025 mm): PTH pad 6 [DIN_4G] of K1
|
||||||
|
@(96.2950 mm, 38.5000 mm): Track [DIN_4G] on In2.Cu, length 18.0984 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(115.8806 mm, 89.8806 mm): Track [NRST] on In2.Cu, length 4.4115 mm
|
||||||
|
@(125.5000 mm, 44.2250 mm): Track [NRST] on In2.Cu, length 48.7750 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.9550 mm, 72.8850 mm): Pad 7 [SW_5V] of U7 on F.Cu
|
||||||
|
@(119.9050 mm, 72.8850 mm): Pad 2 [SW_5V] of U7 on F.Cu
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
255
03-Architecture-Hardware/kicad/_drc-reverted.txt
Normal file
255
03-Architecture-Hardware/kicad/_drc-reverted.txt
Normal file
@ -0,0 +1,255 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T22:40:26 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 47 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1554 mm)
|
||||||
|
Local override; error
|
||||||
|
@(28.0000 mm, 32.5000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(27.0000 mm, 33.7800 mm): PTH pad 1 [BATLED1] of J2
|
||||||
|
[shorting_items]: Items shorting two nets (nets GND and CHRG_STAT)
|
||||||
|
Local override; error
|
||||||
|
@(55.5000 mm, 59.6000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(55.5000 mm, 59.5000 mm): Pad 2 [CHRG_STAT] of R57 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1554 mm)
|
||||||
|
Local override; error
|
||||||
|
@(28.0000 mm, 32.5000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(27.0000 mm, 33.7800 mm): PTH pad 1 [BATLED1] of J2
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1554 mm)
|
||||||
|
Local override; error
|
||||||
|
@(28.0000 mm, 32.5000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(27.0000 mm, 33.7800 mm): PTH pad 1 [BATLED1] of J2
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1554 mm)
|
||||||
|
Local override; error
|
||||||
|
@(28.0000 mm, 32.5000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(27.0000 mm, 33.7800 mm): PTH pad 1 [BATLED1] of J2
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(38.6600 mm, 53.8800 mm): Track [CHRG_EN] on F.Cu, length 0.1838 mm
|
||||||
|
@(39.6000 mm, 53.5000 mm): Track [CLPROG_TP] on F.Cu, length 4.7660 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1981 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.9600 mm, 54.6700 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
@(45.1731 mm, 55.3028 mm): Track [F0_SEL] on B.Cu, length 1.3848 mm
|
||||||
|
[shorting_items]: Items shorting two nets (nets CHRG_STAT and GND)
|
||||||
|
Local override; error
|
||||||
|
@(55.5000 mm, 59.5000 mm): Track [CHRG_STAT] on F.Cu, length 1.8097 mm
|
||||||
|
@(55.5000 mm, 59.6000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1677 mm)
|
||||||
|
Local override; error
|
||||||
|
@(54.3001 mm, 58.4969 mm): Track [3V3] on B.Cu, length 1.0649 mm
|
||||||
|
@(55.5000 mm, 59.6000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[shorting_items]: Items shorting two nets (nets 3V3 and GND)
|
||||||
|
Local override; error
|
||||||
|
@(55.0531 mm, 59.2499 mm): Track [3V3] on B.Cu, length 15.2386 mm
|
||||||
|
@(55.5000 mm, 59.6000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.2515 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.1414 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.7898 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.5383 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.1515 mm, 53.5000 mm): Track [NTC] on F.Cu, length 0.6515 mm
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[hole_clearance]: Hole clearance violation (board setup constraints hole clearance 0.2500 mm; actual 0.0000 mm)
|
||||||
|
Rule: board setup constraints hole; error
|
||||||
|
@(55.5000 mm, 59.5000 mm): Pad 2 [CHRG_STAT] of R57 on F.Cu
|
||||||
|
@(55.5000 mm, 59.6000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
|
||||||
|
Rule: board setup solder mask min width; error
|
||||||
|
@(55.5000 mm, 59.6000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(55.5000 mm, 59.5000 mm): Pad 2 [CHRG_STAT] of R57 on F.Cu
|
||||||
|
[via_dangling]: Via is not connected or connected on only one layer
|
||||||
|
Local override; warning
|
||||||
|
@(87.8000 mm, 40.5000 mm): Via [FAN_RET] on F.Cu - B.Cu
|
||||||
|
[via_dangling]: Via is not connected or connected on only one layer
|
||||||
|
Local override; warning
|
||||||
|
@(75.2000 mm, 25.2000 mm): Via [24V] on F.Cu - B.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 15 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
260
03-Architecture-Hardware/kicad/_drc-shorts.txt
Normal file
260
03-Architecture-Hardware/kicad/_drc-shorts.txt
Normal file
@ -0,0 +1,260 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T21:50:27 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 42 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1921 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5400 mm, 54.6000 mm): Track [IGATE] on F.Cu, length 0.1414 mm
|
||||||
|
@(44.4900 mm, 54.0100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1722 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5400 mm, 54.8000 mm): Track [IGATE] on In2.Cu, length 0.2200 mm
|
||||||
|
@(44.4900 mm, 54.0100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1829 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.4900 mm, 54.0100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.8600 mm, 54.7000 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1829 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.4900 mm, 54.0100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.8600 mm, 54.7000 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1829 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.4900 mm, 54.0100 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.8600 mm, 54.7000 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0288 mm)
|
||||||
|
Local override; error
|
||||||
|
@(45.2888 mm, 53.9412 mm): Track [NTC] on In2.Cu, length 1.3945 mm
|
||||||
|
@(44.8600 mm, 54.7000 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
[shorting_items]: Items shorting two nets (nets NTC and F0_SEL)
|
||||||
|
Local override; error
|
||||||
|
@(45.2888 mm, 55.3357 mm): Track [NTC] on In2.Cu, length 13.7702 mm
|
||||||
|
@(44.6300 mm, 55.5600 mm): Via [F0_SEL] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(38.6600 mm, 53.8800 mm): Track [CHRG_EN] on F.Cu, length 0.1838 mm
|
||||||
|
@(39.6000 mm, 53.5000 mm): Track [CLPROG_TP] on F.Cu, length 4.7660 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[via_dangling]: Via is not connected or connected on only one layer
|
||||||
|
Local override; warning
|
||||||
|
@(63.0600 mm, 44.1600 mm): Via [BAT_PLUS] on F.Cu - B.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 21 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.1725 mm, 25.7025 mm): PTH pad 6 [DIN_4G] of K1
|
||||||
|
@(96.2950 mm, 38.5000 mm): Track [DIN_4G] on In2.Cu, length 18.0984 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(115.8806 mm, 89.8806 mm): Track [NRST] on In2.Cu, length 4.4115 mm
|
||||||
|
@(125.5000 mm, 44.2250 mm): Track [NRST] on In2.Cu, length 48.7750 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.6858 mm, 73.1542 mm): Track [SW_5V] on F.Cu, length 0.3807 mm
|
||||||
|
@(119.9050 mm, 72.8850 mm): Pad 2 [SW_5V] of U7 on F.Cu
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
209
03-Architecture-Hardware/kicad/_drc-stitched.txt
Normal file
209
03-Architecture-Hardware/kicad/_drc-stitched.txt
Normal file
@ -0,0 +1,209 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T22:36:04 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 35 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.2515 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.1414 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.7898 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.5383 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.1515 mm, 53.5000 mm): Track [NTC] on F.Cu, length 0.6515 mm
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1981 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.9600 mm, 54.6700 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
@(45.1731 mm, 55.3028 mm): Track [F0_SEL] on B.Cu, length 1.3848 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 53.5000 mm): Track [CLPROG_TP] on F.Cu, length 4.7660 mm
|
||||||
|
@(37.4500 mm, 53.8800 mm): Track [CHRG_EN] on F.Cu, length 0.1697 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 15 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
255
03-Architecture-Hardware/kicad/_drc-stitched2.txt
Normal file
255
03-Architecture-Hardware/kicad/_drc-stitched2.txt
Normal file
@ -0,0 +1,255 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T22:39:36 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 47 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1554 mm)
|
||||||
|
Local override; error
|
||||||
|
@(28.0000 mm, 32.5000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(27.0000 mm, 33.7800 mm): PTH pad 1 [BATLED1] of J2
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1554 mm)
|
||||||
|
Local override; error
|
||||||
|
@(28.0000 mm, 32.5000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(27.0000 mm, 33.7800 mm): PTH pad 1 [BATLED1] of J2
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1554 mm)
|
||||||
|
Local override; error
|
||||||
|
@(28.0000 mm, 32.5000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(27.0000 mm, 33.7800 mm): PTH pad 1 [BATLED1] of J2
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1554 mm)
|
||||||
|
Local override; error
|
||||||
|
@(28.0000 mm, 32.5000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(27.0000 mm, 33.7800 mm): PTH pad 1 [BATLED1] of J2
|
||||||
|
[shorting_items]: Items shorting two nets (nets GND and CHRG_STAT)
|
||||||
|
Local override; error
|
||||||
|
@(55.5000 mm, 59.6000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(55.5000 mm, 59.5000 mm): Pad 2 [CHRG_STAT] of R57 on F.Cu
|
||||||
|
[shorting_items]: Items shorting two nets (nets 3V3 and GND)
|
||||||
|
Local override; error
|
||||||
|
@(55.0531 mm, 59.2499 mm): Track [3V3] on B.Cu, length 15.2386 mm
|
||||||
|
@(55.5000 mm, 59.6000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1677 mm)
|
||||||
|
Local override; error
|
||||||
|
@(54.3001 mm, 58.4969 mm): Track [3V3] on B.Cu, length 1.0649 mm
|
||||||
|
@(55.5000 mm, 59.6000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(38.6600 mm, 53.8800 mm): Track [CHRG_EN] on F.Cu, length 0.1838 mm
|
||||||
|
@(39.6000 mm, 53.5000 mm): Track [CLPROG_TP] on F.Cu, length 4.7660 mm
|
||||||
|
[shorting_items]: Items shorting two nets (nets CHRG_STAT and GND)
|
||||||
|
Local override; error
|
||||||
|
@(55.5000 mm, 59.5000 mm): Track [CHRG_STAT] on F.Cu, length 1.8097 mm
|
||||||
|
@(55.5000 mm, 59.6000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1981 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.9600 mm, 54.6700 mm): Via [IGATE] on F.Cu - B.Cu
|
||||||
|
@(45.1731 mm, 55.3028 mm): Track [F0_SEL] on B.Cu, length 1.3848 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.2515 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.1414 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1932 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.1515 mm, 53.5000 mm): Track [NTC] on F.Cu, length 0.6515 mm
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1800 mm)
|
||||||
|
Local override; error
|
||||||
|
@(44.5000 mm, 53.9800 mm): Via [VEH5V] on F.Cu - B.Cu
|
||||||
|
@(44.7898 mm, 53.4000 mm): Track [NTC] on F.Cu, length 0.5383 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[hole_clearance]: Hole clearance violation (board setup constraints hole clearance 0.2500 mm; actual 0.0000 mm)
|
||||||
|
Rule: board setup constraints hole; error
|
||||||
|
@(55.5000 mm, 59.5000 mm): Pad 2 [CHRG_STAT] of R57 on F.Cu
|
||||||
|
@(55.5000 mm, 59.6000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
|
||||||
|
Rule: board setup solder mask min width; error
|
||||||
|
@(55.5000 mm, 59.6000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(55.5000 mm, 59.5000 mm): Pad 2 [CHRG_STAT] of R57 on F.Cu
|
||||||
|
[via_dangling]: Via is not connected or connected on only one layer
|
||||||
|
Local override; warning
|
||||||
|
@(87.8000 mm, 40.5000 mm): Via [FAN_RET] on F.Cu - B.Cu
|
||||||
|
[via_dangling]: Via is not connected or connected on only one layer
|
||||||
|
Local override; warning
|
||||||
|
@(75.2000 mm, 25.2000 mm): Via [24V] on F.Cu - B.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 15 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
@(134.5800 mm, 0.3000 mm): Zone [GND] on F.Cu, B.Cu and In1.Cu, priority 0
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
233
03-Architecture-Hardware/kicad/_drc-vias-clean.txt
Normal file
233
03-Architecture-Hardware/kicad/_drc-vias-clean.txt
Normal file
@ -0,0 +1,233 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T18:01:25 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 33 DRC violations **
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 23 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.1725 mm, 25.7025 mm): PTH pad 6 [DIN_4G] of K1
|
||||||
|
@(96.2950 mm, 38.5000 mm): Track [DIN_4G] on In2.Cu, length 18.0984 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(20.3500 mm, 34.0000 mm): Pad 2 [GND] of Rigb on F.Cu
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.0000 mm, 0.0000 mm): Zone [GND] on In1.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(40.1172 mm, 59.6888 mm): Track [BAT_PLUS] on F.Cu, length 6.1934 mm
|
||||||
|
@(41.0500 mm, 51.5500 mm): Pad 23 [BAT_PLUS] of U6 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(119.0000 mm, 93.0000 mm): PTH pad 1 [NRST] of SW1
|
||||||
|
@(125.5000 mm, 93.0000 mm): PTH pad 1 [NRST] of SW1
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.9550 mm, 72.8850 mm): Pad 7 [SW_5V] of U7 on F.Cu
|
||||||
|
@(119.9050 mm, 72.8850 mm): Pad 2 [SW_5V] of U7 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 55.0000 mm): Pad 6 [VEH5V] of U6 on F.Cu
|
||||||
|
@(43.5000 mm, 54.0000 mm): Pad 16 [VEH5V] of U6 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 55.0000 mm): Pad 6 [VEH5V] of U6 on F.Cu
|
||||||
|
@(31.4500 mm, 56.9683 mm): Track [VEH5V] on F.Cu, length 4.5702 mm
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
237
03-Architecture-Hardware/kicad/_drc-vias5.txt
Normal file
237
03-Architecture-Hardware/kicad/_drc-vias5.txt
Normal file
@ -0,0 +1,237 @@
|
|||||||
|
** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
|
||||||
|
** Created on 2026-07-04T18:00:34 **
|
||||||
|
** Report includes: Errors, Warnings **
|
||||||
|
|
||||||
|
** Found 34 DRC violations **
|
||||||
|
[shorting_items]: Items shorting two nets (nets GND and CHRG_EN)
|
||||||
|
Local override; error
|
||||||
|
@(20.3500 mm, 34.0000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(24.8780 mm, 33.7902 mm): Track [CHRG_EN] on B.Cu, length 6.9870 mm
|
||||||
|
[shorting_items]: Items shorting two nets (nets GND and MAIN5V)
|
||||||
|
Local override; error
|
||||||
|
@(20.3500 mm, 34.0000 mm): Via [GND] on F.Cu - B.Cu
|
||||||
|
@(20.3444 mm, 35.8773 mm): Track [MAIN5V] on In2.Cu, length 14.0987 mm
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 77.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.5000 mm): Pad 3 [unconnected-(U4-ALERT-Pad3)] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.0000 mm): Pad 5 [3V3] of U4 on F.Cu
|
||||||
|
@(50.7125 mm, 77.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; 3 spokes connected to isolated island)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(72.7200 mm, 33.7800 mm): PTH pad 19 [GND] of J2
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(130.0000 mm, 65.5000 mm): PTH pad 2 [GND] of P4
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer B.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(33.5400 mm, 41.0000 mm): PTH pad 29 [GND] of MOD1
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(108.5500 mm, 74.5000 mm): Pad 2 [GND] of Ccomp2 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.7750 mm, 76.0000 mm): Pad 2 [GND] of C7 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(16.0500 mm, 72.0000 mm): Pad 2 [GND] of Rled on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(80.9443 mm, 14.4071 mm): Pad 2 [GND] of Rfreq on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(12.7750 mm, 76.0000 mm): Pad 2 [GND] of C5 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(39.5000 mm, 72.0000 mm): Pad 2 [GND] of C24 on F.Cu
|
||||||
|
[starved_thermal]: Thermal relief connection to zone incomplete (layer F.Cu; zone min spoke count 2; actual 1)
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(100.5000 mm, 10.9000 mm): Pad 2 [GND] of C23 on F.Cu
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(130.0000 mm, 21.5000 mm): Footprint P6
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 39.7500 mm): Footprint P10
|
||||||
|
[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity'
|
||||||
|
Local override; warning
|
||||||
|
@(44.0000 mm, 78.0000 mm): Footprint U3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Footprint MH3
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Footprint MH4
|
||||||
|
[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST'
|
||||||
|
Local override; warning
|
||||||
|
@(129.9750 mm, 30.5000 mm): Footprint P8
|
||||||
|
[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix'
|
||||||
|
Local override; warning
|
||||||
|
@(92.5000 mm, 93.5000 mm): Footprint P1
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Footprint MH2
|
||||||
|
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Footprint MH1
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(18.7627 mm, 53.4775 mm): Segment of Rgs on F.Silkscreen
|
||||||
|
@(19.0000 mm, 52.5700 mm): Reference field of Rgs
|
||||||
|
[silk_overlap]: Silkscreen clearance
|
||||||
|
Rule: board setup constraints silk; warning
|
||||||
|
@(50.0000 mm, 76.3500 mm): Reference field of U4
|
||||||
|
@(49.2800 mm, 77.0600 mm): Polygon of U4 on F.Silkscreen
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 95.0000 mm): Reference field of MH4
|
||||||
|
@(131.0000 mm, 95.0000 mm): NPTH pad of MH4
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(70.1500 mm, 8.2000 mm): Reference field of C3
|
||||||
|
@(69.1375 mm, 6.0000 mm): Pad 2 [SW_IN] of F1 on F.Cu
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 5.0000 mm): Reference field of MH1
|
||||||
|
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(5.0000 mm, 95.0000 mm): Reference field of MH3
|
||||||
|
@(5.0000 mm, 95.0000 mm): NPTH pad of MH3
|
||||||
|
[silk_over_copper]: Silkscreen clipped by solder mask
|
||||||
|
Local override; warning
|
||||||
|
@(131.0000 mm, 5.0000 mm): Reference field of MH2
|
||||||
|
@(131.0000 mm, 5.0000 mm): NPTH pad of MH2
|
||||||
|
|
||||||
|
** Found 23 unconnected pads **
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.1725 mm, 25.7025 mm): PTH pad 6 [DIN_4G] of K1
|
||||||
|
@(96.2950 mm, 38.5000 mm): Track [DIN_4G] on In2.Cu, length 18.0984 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on B.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(44.7000 mm, 77.6000 mm): Pad 4 [GND] of U3 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(50.7125 mm, 78.5000 mm): Pad 4 [GND] of U4 on F.Cu
|
||||||
|
@(49.2875 mm, 78.0000 mm): Pad 2 [GND] of U4 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
@(0.5000 mm, 0.5000 mm): Zone [GND] on F.Cu, priority 0
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(37.2565 mm, 62.5495 mm): Track [BAT_PLUS] on F.Cu, length 4.0456 mm
|
||||||
|
@(41.0500 mm, 51.5500 mm): Pad 23 [BAT_PLUS] of U6 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(115.8806 mm, 89.8806 mm): Track [NRST] on In2.Cu, length 4.4115 mm
|
||||||
|
@(125.5000 mm, 44.2250 mm): Track [NRST] on In2.Cu, length 48.7750 mm
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(114.9550 mm, 72.8850 mm): Pad 7 [SW_5V] of U7 on F.Cu
|
||||||
|
@(119.9050 mm, 72.8850 mm): Pad 2 [SW_5V] of U7 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 55.0000 mm): Pad 6 [VEH5V] of U6 on F.Cu
|
||||||
|
@(43.5000 mm, 54.0000 mm): Pad 16 [VEH5V] of U6 on F.Cu
|
||||||
|
[unconnected_items]: Missing connection between items
|
||||||
|
Local override; error
|
||||||
|
@(39.6000 mm, 55.0000 mm): Pad 6 [VEH5V] of U6 on F.Cu
|
||||||
|
@(31.4500 mm, 56.9683 mm): Track [VEH5V] on F.Cu, length 4.5702 mm
|
||||||
|
|
||||||
|
** Found 0 Footprint errors **
|
||||||
|
|
||||||
|
** Ignored checks **
|
||||||
|
- Footprint has no courtyard defined
|
||||||
|
- Track endpoint not centered on via
|
||||||
|
- Tuning profile track geometries
|
||||||
|
- Footprint doesn't match symbol's footprint filters
|
||||||
|
- Footprint component type doesn't match footprint pads
|
||||||
|
|
||||||
|
** End of Report **
|
||||||
@ -0,0 +1,75 @@
|
|||||||
|
value,footprint,quantity,references
|
||||||
|
10k,Resistor_SMD:R_0603_1608Metric,10,"['R2', 'Rigb', 'R5', 'Rled', 'R41', 'Rtp', 'R6', 'Rrp', 'R7', 'R8']"
|
||||||
|
MODO-B-UPLINK,Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical,1,['P13']
|
||||||
|
SS34,Diode_SMD:D_SMA,3,"['Dbk', 'D2', 'Dbk2']"
|
||||||
|
FAN,Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical,1,['P6']
|
||||||
|
20k,Resistor_SMD:R_0603_1608Metric,1,['Ren2']
|
||||||
|
LED,LED_SMD:LED_0805_2012Metric,5,"['DB2', 'DB1', 'DB3', 'DB4', 'D1']"
|
||||||
|
BATT-1S4P+NTC,Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical,1,['P4']
|
||||||
|
RESET-EXT,Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,['P10']
|
||||||
|
2.2nF,Capacitor_SMD:C_0603_1608Metric,2,"['Ccomp', 'Ccomp2']"
|
||||||
|
MP1584EN,Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm,2,"['U7', 'U2']"
|
||||||
|
Blackpill-L,Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical,1,['J1']
|
||||||
|
CUTOFF-SW,Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,['P11']
|
||||||
|
AO3401A,Package_TO_SOT_SMD:SOT-23,1,['Q1']
|
||||||
|
100R,Resistor_SMD:R_0603_1608Metric,2,"['Rg', 'Rig']"
|
||||||
|
AO4406A,Package_SO:SOIC-8_3.9x4.9mm_P1.27mm,1,['Q7']
|
||||||
|
10uF,Capacitor_SMD:C_0805_2012Metric,2,"['C34', 'C30']"
|
||||||
|
4.7k,Resistor_SMD:R_0603_1608Metric,2,"['R31', 'R30']"
|
||||||
|
100k,Resistor_SMD:R_0603_1608Metric,8,"['Rfreq2', 'R20', 'Rgs', 'R56', 'R58', 'Rfreq', 'Ren1', 'R57']"
|
||||||
|
SHT40-AD1B,Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad,1,['U3']
|
||||||
|
22uF,Capacitor_SMD:C_0805_2012Metric,3,"['C40', 'C35', 'C41']"
|
||||||
|
XBEE-ROW-1 (VCC/DOUT/DIN),Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical,1,['J7']
|
||||||
|
8mR/1%,Resistor_SMD:R_1206_3216Metric,1,['RS1']
|
||||||
|
100nF,Capacitor_SMD:C_0603_1608Metric,7,"['Cu3', 'C7', 'C9', 'C11', 'C5', 'C24', 'Cu4']"
|
||||||
|
1k,Resistor_SMD:R_0603_1608Metric,4,"['R3', 'Rts', 'R1', 'R40']"
|
||||||
|
100k/1%,Resistor_SMD:R_0603_1608Metric,3,"['R60', 'R52', 'R54']"
|
||||||
|
22k,Resistor_SMD:R_0603_1608Metric,1,['Rdfu']
|
||||||
|
MountingHole_3.2mm,MountingHole:MountingHole_3.2mm,4,"['MH3', 'MH4', 'MH2', 'MH1']"
|
||||||
|
SMBJ33A,Diode_SMD:D_SMB,1,['D10']
|
||||||
|
40.2k,Resistor_SMD:R_0603_1608Metric,2,"['Rcomp', 'Rcomp2']"
|
||||||
|
MMBT3904,Package_TO_SOT_SMD:SOT-23,2,"['Q5', 'Q6']"
|
||||||
|
5V-IN-SD15B05,Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,['P2']
|
||||||
|
10nF,Capacitor_SMD:C_0603_1608Metric,2,"['Cbst2', 'Cbst']"
|
||||||
|
AO3400A,Package_TO_SOT_SMD:SOT-23,2,"['Q2', 'Q4']"
|
||||||
|
USART1-RSV,Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical,1,['H3']
|
||||||
|
2.2uH/8A,Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm,1,['L6']
|
||||||
|
TMP102,Package_TO_SOT_SMD:SOT-563,1,['U4']
|
||||||
|
330R,Resistor_SMD:R_0603_1608Metric,4,"['RB3', 'RB4', 'RB2', 'RB1']"
|
||||||
|
CLPROG,TestPoint:TestPoint_Pad_D1.5mm,1,['TP1']
|
||||||
|
10uH,Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm,1,['L2']
|
||||||
|
XBEE-ROW-2,Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical,1,['J8']
|
||||||
|
22uF/50V,Capacitor_SMD:C_1210_3225Metric,1,['C22']
|
||||||
|
31.6k/1%,Resistor_SMD:R_0603_1608Metric,1,['R61']
|
||||||
|
TEMP_PROBE,Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical,1,['P5']
|
||||||
|
10k/1%,Resistor_SMD:R_0603_1608Metric,2,"['R55', 'R42']"
|
||||||
|
F0:1,Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm,1,['JP4']
|
||||||
|
PANEL_LED,Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,['P8']
|
||||||
|
0R,Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm,1,['JP1']
|
||||||
|
NTC-HOTSPOT,Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,['P12']
|
||||||
|
47uF,Capacitor_SMD:C_1210_3225Metric,2,"['C32', 'C33']"
|
||||||
|
GX16-5,"TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal",1,['P1']
|
||||||
|
PPTC 3A,Fuse:Fuse_1812_4532Metric,1,['F1']
|
||||||
|
G5V-1 DC5,Relay_THT:Relay_SPDT_Omron_G5V-1,1,['K1']
|
||||||
|
Blackpill-R,Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical,1,['J2']
|
||||||
|
100uF/6.3V,Capacitor_SMD:CP_Elec_6.3x7.7,1,['C43']
|
||||||
|
BZX84C15,Package_TO_SOT_SMD:SOT-23,1,['DzG']
|
||||||
|
LTC4040EUFD,Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm,1,['U6']
|
||||||
|
F1:0,Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm,1,['JP3']
|
||||||
|
IRFR5305,Package_TO_SOT_SMD:TO-252-2,1,['Q10']
|
||||||
|
499k/1%,Resistor_SMD:R_0603_1608Metric,1,['R53']
|
||||||
|
287k/1%,Resistor_SMD:R_0603_1608Metric,1,['R51']
|
||||||
|
47uF/50V,Capacitor_SMD:CP_Elec_6.3x7.7,1,['C10']
|
||||||
|
RESET,Button_Switch_THT:SW_PUSH_6mm,1,['SW1']
|
||||||
|
2.2uF,Capacitor_SMD:C_0603_1608Metric,1,['C31']
|
||||||
|
19.1k,Resistor_SMD:R_0603_1608Metric,1,['R21']
|
||||||
|
47uF,Capacitor_SMD:CP_Elec_6.3x7.7,1,['C3']
|
||||||
|
BAT54,Diode_SMD:D_SOD-123,1,['D5']
|
||||||
|
RTK2B-UART1,Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical,1,['P3']
|
||||||
|
825R/1%,Resistor_SMD:R_0603_1608Metric,1,['R50']
|
||||||
|
PFO,TestPoint:TestPoint_Pad_D1.5mm,1,['TP2']
|
||||||
|
22uF/16V,Capacitor_SMD:C_0805_2012Metric,1,['C23']
|
||||||
|
F2:Li-ion,Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm,1,['JP2']
|
||||||
|
1N4148W,Diode_SMD:D_SOD-123,1,['D6']
|
||||||
|
10uH/2A,Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm,1,['L7']
|
||||||
|
simpleRTK2B-Pro-socket,Module:Arduino_UNO_R3,1,['MOD1']
|
||||||
|
11838
03-Architecture-Hardware/kicad/fab-jlcpcb/hbox-watchdog-v3-PROD-B_Cu.gbl
Normal file
11838
03-Architecture-Hardware/kicad/fab-jlcpcb/hbox-watchdog-v3-PROD-B_Cu.gbl
Normal file
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,282 @@
|
|||||||
|
%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*%
|
||||||
|
%TF.CreationDate,2026-07-04T22:43:43-06:00*%
|
||||||
|
%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,rev?*%
|
||||||
|
%TF.SameCoordinates,Original*%
|
||||||
|
%TF.FileFunction,Soldermask,Bot*%
|
||||||
|
%TF.FilePolarity,Negative*%
|
||||||
|
%FSLAX46Y46*%
|
||||||
|
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
|
||||||
|
G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-04 22:43:43*
|
||||||
|
%MOMM*%
|
||||||
|
%LPD*%
|
||||||
|
G01*
|
||||||
|
G04 APERTURE LIST*
|
||||||
|
G04 Aperture macros list*
|
||||||
|
%AMRoundRect*
|
||||||
|
0 Rectangle with rounded corners*
|
||||||
|
0 $1 Rounding radius*
|
||||||
|
0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
|
||||||
|
0 Add a 4 corners polygon primitive as box body*
|
||||||
|
4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
|
||||||
|
0 Add four circle primitives for the rounded corners*
|
||||||
|
1,1,$1+$1,$2,$3*
|
||||||
|
1,1,$1+$1,$4,$5*
|
||||||
|
1,1,$1+$1,$6,$7*
|
||||||
|
1,1,$1+$1,$8,$9*
|
||||||
|
0 Add four rect primitives between the rounded corners*
|
||||||
|
20,1,$1+$1,$2,$3,$4,$5,0*
|
||||||
|
20,1,$1+$1,$4,$5,$6,$7,0*
|
||||||
|
20,1,$1+$1,$6,$7,$8,$9,0*
|
||||||
|
20,1,$1+$1,$8,$9,$2,$3,0*%
|
||||||
|
G04 Aperture macros list end*
|
||||||
|
%ADD10RoundRect,0.250000X-0.600000X-0.725000X0.600000X-0.725000X0.600000X0.725000X-0.600000X0.725000X0*%
|
||||||
|
%ADD11O,1.700000X1.950000*%
|
||||||
|
%ADD12RoundRect,0.250000X-0.725000X0.600000X-0.725000X-0.600000X0.725000X-0.600000X0.725000X0.600000X0*%
|
||||||
|
%ADD13O,1.950000X1.700000*%
|
||||||
|
%ADD14RoundRect,0.250000X0.725000X-0.600000X0.725000X0.600000X-0.725000X0.600000X-0.725000X-0.600000X0*%
|
||||||
|
%ADD15RoundRect,0.250000X-0.750000X0.600000X-0.750000X-0.600000X0.750000X-0.600000X0.750000X0.600000X0*%
|
||||||
|
%ADD16O,2.000000X1.700000*%
|
||||||
|
%ADD17R,1.700000X1.700000*%
|
||||||
|
%ADD18C,1.700000*%
|
||||||
|
%ADD19RoundRect,0.250000X-0.600000X-0.750000X0.600000X-0.750000X0.600000X0.750000X-0.600000X0.750000X0*%
|
||||||
|
%ADD20O,1.700000X2.000000*%
|
||||||
|
%ADD21R,1.350000X1.350000*%
|
||||||
|
%ADD22C,1.350000*%
|
||||||
|
%ADD23C,6.000000*%
|
||||||
|
%ADD24RoundRect,0.250000X0.750000X-0.600000X0.750000X0.600000X-0.750000X0.600000X-0.750000X-0.600000X0*%
|
||||||
|
%ADD25RoundRect,0.250000X-1.050000X1.050000X-1.050000X-1.050000X1.050000X-1.050000X1.050000X1.050000X0*%
|
||||||
|
%ADD26C,2.600000*%
|
||||||
|
%ADD27R,2.000000X2.000000*%
|
||||||
|
%ADD28C,2.000000*%
|
||||||
|
%ADD29R,1.600000X1.600000*%
|
||||||
|
%ADD30O,1.600000X1.600000*%
|
||||||
|
G04 APERTURE END LIST*
|
||||||
|
D10*
|
||||||
|
%TO.C,P13*%
|
||||||
|
X36000000Y-6000000D03*
|
||||||
|
D11*
|
||||||
|
X38500000Y-6000000D03*
|
||||||
|
X41000000Y-6000000D03*
|
||||||
|
%TD*%
|
||||||
|
D12*
|
||||||
|
%TO.C,P6*%
|
||||||
|
X130000000Y-21500000D03*
|
||||||
|
D13*
|
||||||
|
X130000000Y-19000000D03*
|
||||||
|
X130000000Y-16500000D03*
|
||||||
|
X130000000Y-14000000D03*
|
||||||
|
%TD*%
|
||||||
|
D14*
|
||||||
|
%TO.C,P4*%
|
||||||
|
X130000000Y-68000000D03*
|
||||||
|
D13*
|
||||||
|
X130000000Y-65500000D03*
|
||||||
|
X130000000Y-63000000D03*
|
||||||
|
%TD*%
|
||||||
|
D15*
|
||||||
|
%TO.C,P10*%
|
||||||
|
X129975000Y-39750000D03*
|
||||||
|
D16*
|
||||||
|
X129975000Y-37250000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,J1*%
|
||||||
|
X27000000Y-16000000D03*
|
||||||
|
D18*
|
||||||
|
X29540000Y-16000000D03*
|
||||||
|
X32080000Y-16000000D03*
|
||||||
|
X34620000Y-16000000D03*
|
||||||
|
X37160000Y-16000000D03*
|
||||||
|
X39700000Y-16000000D03*
|
||||||
|
X42240000Y-16000000D03*
|
||||||
|
X44780000Y-16000000D03*
|
||||||
|
X47320000Y-16000000D03*
|
||||||
|
X49860000Y-16000000D03*
|
||||||
|
X52400000Y-16000000D03*
|
||||||
|
X54940000Y-16000000D03*
|
||||||
|
X57480000Y-16000000D03*
|
||||||
|
X60020000Y-16000000D03*
|
||||||
|
X62560000Y-16000000D03*
|
||||||
|
X65100000Y-16000000D03*
|
||||||
|
X67640000Y-16000000D03*
|
||||||
|
X70180000Y-16000000D03*
|
||||||
|
X72720000Y-16000000D03*
|
||||||
|
X75260000Y-16000000D03*
|
||||||
|
%TD*%
|
||||||
|
D19*
|
||||||
|
%TO.C,P11*%
|
||||||
|
X55600000Y-6000000D03*
|
||||||
|
D20*
|
||||||
|
X58100000Y-6000000D03*
|
||||||
|
%TD*%
|
||||||
|
D21*
|
||||||
|
%TO.C,J7*%
|
||||||
|
X94000000Y-34500000D03*
|
||||||
|
D22*
|
||||||
|
X94000000Y-36500000D03*
|
||||||
|
X94000000Y-38500000D03*
|
||||||
|
X94000000Y-40500000D03*
|
||||||
|
X94000000Y-42500000D03*
|
||||||
|
X94000000Y-44500000D03*
|
||||||
|
X94000000Y-46500000D03*
|
||||||
|
X94000000Y-48500000D03*
|
||||||
|
X94000000Y-50500000D03*
|
||||||
|
X94000000Y-52500000D03*
|
||||||
|
%TD*%
|
||||||
|
D23*
|
||||||
|
%TO.C,MH3*%
|
||||||
|
X5000000Y-95000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,MH4*%
|
||||||
|
X131000000Y-95000000D03*
|
||||||
|
%TD*%
|
||||||
|
D19*
|
||||||
|
%TO.C,P2*%
|
||||||
|
X47000000Y-6000000D03*
|
||||||
|
D20*
|
||||||
|
X49500000Y-6000000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,H3*%
|
||||||
|
X31000000Y-6000000D03*
|
||||||
|
D18*
|
||||||
|
X31000000Y-8540000D03*
|
||||||
|
X31000000Y-11080000D03*
|
||||||
|
%TD*%
|
||||||
|
D21*
|
||||||
|
%TO.C,J8*%
|
||||||
|
X116350000Y-34500000D03*
|
||||||
|
D22*
|
||||||
|
X116350000Y-36500000D03*
|
||||||
|
X116350000Y-38500000D03*
|
||||||
|
X116350000Y-40500000D03*
|
||||||
|
X116350000Y-42500000D03*
|
||||||
|
X116350000Y-44500000D03*
|
||||||
|
X116350000Y-46500000D03*
|
||||||
|
X116350000Y-48500000D03*
|
||||||
|
X116350000Y-50500000D03*
|
||||||
|
X116350000Y-52500000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,P5*%
|
||||||
|
X18000000Y-6000000D03*
|
||||||
|
D11*
|
||||||
|
X20500000Y-6000000D03*
|
||||||
|
X23000000Y-6000000D03*
|
||||||
|
X25500000Y-6000000D03*
|
||||||
|
%TD*%
|
||||||
|
D15*
|
||||||
|
%TO.C,P8*%
|
||||||
|
X129975000Y-30500000D03*
|
||||||
|
D16*
|
||||||
|
X129975000Y-28000000D03*
|
||||||
|
%TD*%
|
||||||
|
D24*
|
||||||
|
%TO.C,P12*%
|
||||||
|
X130000000Y-81000000D03*
|
||||||
|
D16*
|
||||||
|
X130000000Y-78500000D03*
|
||||||
|
%TD*%
|
||||||
|
D25*
|
||||||
|
%TO.C,P1*%
|
||||||
|
X92500000Y-93500000D03*
|
||||||
|
D26*
|
||||||
|
X97500000Y-93500000D03*
|
||||||
|
X102500000Y-93500000D03*
|
||||||
|
X107500000Y-93500000D03*
|
||||||
|
X112500000Y-93500000D03*
|
||||||
|
%TD*%
|
||||||
|
D23*
|
||||||
|
%TO.C,MH2*%
|
||||||
|
X131000000Y-5000000D03*
|
||||||
|
%TD*%
|
||||||
|
D27*
|
||||||
|
%TO.C,K1*%
|
||||||
|
X109092500Y-15542500D03*
|
||||||
|
D28*
|
||||||
|
X109092500Y-18082500D03*
|
||||||
|
X109092500Y-25702500D03*
|
||||||
|
X114172500Y-25702500D03*
|
||||||
|
X114172500Y-18082500D03*
|
||||||
|
X114172500Y-15542500D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,J2*%
|
||||||
|
X27000000Y-33780000D03*
|
||||||
|
D18*
|
||||||
|
X29540000Y-33780000D03*
|
||||||
|
X32080000Y-33780000D03*
|
||||||
|
X34620000Y-33780000D03*
|
||||||
|
X37160000Y-33780000D03*
|
||||||
|
X39700000Y-33780000D03*
|
||||||
|
X42240000Y-33780000D03*
|
||||||
|
X44780000Y-33780000D03*
|
||||||
|
X47320000Y-33780000D03*
|
||||||
|
X49860000Y-33780000D03*
|
||||||
|
X52400000Y-33780000D03*
|
||||||
|
X54940000Y-33780000D03*
|
||||||
|
X57480000Y-33780000D03*
|
||||||
|
X60020000Y-33780000D03*
|
||||||
|
X62560000Y-33780000D03*
|
||||||
|
X65100000Y-33780000D03*
|
||||||
|
X67640000Y-33780000D03*
|
||||||
|
X70180000Y-33780000D03*
|
||||||
|
X72720000Y-33780000D03*
|
||||||
|
X75260000Y-33780000D03*
|
||||||
|
%TD*%
|
||||||
|
D23*
|
||||||
|
%TO.C,MH1*%
|
||||||
|
X5000000Y-5000000D03*
|
||||||
|
%TD*%
|
||||||
|
D28*
|
||||||
|
%TO.C,SW1*%
|
||||||
|
X119000000Y-93000000D03*
|
||||||
|
X125500000Y-93000000D03*
|
||||||
|
X119000000Y-97500000D03*
|
||||||
|
X125500000Y-97500000D03*
|
||||||
|
%TD*%
|
||||||
|
D14*
|
||||||
|
%TO.C,P3*%
|
||||||
|
X130000000Y-55000000D03*
|
||||||
|
D13*
|
||||||
|
X130000000Y-52500000D03*
|
||||||
|
X130000000Y-50000000D03*
|
||||||
|
X130000000Y-47500000D03*
|
||||||
|
%TD*%
|
||||||
|
D29*
|
||||||
|
%TO.C,MOD1*%
|
||||||
|
X35060000Y-89260000D03*
|
||||||
|
D30*
|
||||||
|
X37600000Y-89260000D03*
|
||||||
|
X40140000Y-89260000D03*
|
||||||
|
X42680000Y-89260000D03*
|
||||||
|
X45220000Y-89260000D03*
|
||||||
|
X47760000Y-89260000D03*
|
||||||
|
X50300000Y-89260000D03*
|
||||||
|
X52840000Y-89260000D03*
|
||||||
|
X57920000Y-89260000D03*
|
||||||
|
X60460000Y-89260000D03*
|
||||||
|
X63000000Y-89260000D03*
|
||||||
|
X65540000Y-89260000D03*
|
||||||
|
X68080000Y-89260000D03*
|
||||||
|
X70620000Y-89260000D03*
|
||||||
|
X70620000Y-41000000D03*
|
||||||
|
X68080000Y-41000000D03*
|
||||||
|
X65540000Y-41000000D03*
|
||||||
|
X63000000Y-41000000D03*
|
||||||
|
X60460000Y-41000000D03*
|
||||||
|
X57920000Y-41000000D03*
|
||||||
|
X55380000Y-41000000D03*
|
||||||
|
X52840000Y-41000000D03*
|
||||||
|
X48780000Y-41000000D03*
|
||||||
|
X46240000Y-41000000D03*
|
||||||
|
X43700000Y-41000000D03*
|
||||||
|
X41160000Y-41000000D03*
|
||||||
|
X38620000Y-41000000D03*
|
||||||
|
X36080000Y-41000000D03*
|
||||||
|
X33540000Y-41000000D03*
|
||||||
|
X31000000Y-41000000D03*
|
||||||
|
X28460000Y-41000000D03*
|
||||||
|
X25920000Y-41000000D03*
|
||||||
|
%TD*%
|
||||||
|
M02*
|
||||||
@ -0,0 +1,15 @@
|
|||||||
|
%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*%
|
||||||
|
%TF.CreationDate,2026-07-04T22:43:43-06:00*%
|
||||||
|
%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,rev?*%
|
||||||
|
%TF.SameCoordinates,Original*%
|
||||||
|
%TF.FileFunction,Paste,Bot*%
|
||||||
|
%TF.FilePolarity,Positive*%
|
||||||
|
%FSLAX46Y46*%
|
||||||
|
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
|
||||||
|
G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-04 22:43:43*
|
||||||
|
%MOMM*%
|
||||||
|
%LPD*%
|
||||||
|
G01*
|
||||||
|
G04 APERTURE LIST*
|
||||||
|
G04 APERTURE END LIST*
|
||||||
|
M02*
|
||||||
@ -0,0 +1,129 @@
|
|||||||
|
%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*%
|
||||||
|
%TF.CreationDate,2026-07-04T22:43:43-06:00*%
|
||||||
|
%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,rev?*%
|
||||||
|
%TF.SameCoordinates,Original*%
|
||||||
|
%TF.FileFunction,Legend,Bot*%
|
||||||
|
%TF.FilePolarity,Positive*%
|
||||||
|
%FSLAX46Y46*%
|
||||||
|
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
|
||||||
|
G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-04 22:43:43*
|
||||||
|
%MOMM*%
|
||||||
|
%LPD*%
|
||||||
|
G01*
|
||||||
|
G04 APERTURE LIST*
|
||||||
|
%ADD10C,0.150000*%
|
||||||
|
%ADD11C,0.120000*%
|
||||||
|
G04 APERTURE END LIST*
|
||||||
|
D10*
|
||||||
|
X38163332Y-93524819D02*
|
||||||
|
X38163332Y-92524819D01*
|
||||||
|
X38163332Y-92524819D02*
|
||||||
|
X37829999Y-93239104D01*
|
||||||
|
X37829999Y-93239104D02*
|
||||||
|
X37496666Y-92524819D01*
|
||||||
|
X37496666Y-92524819D02*
|
||||||
|
X37496666Y-93524819D01*
|
||||||
|
X36829999Y-92524819D02*
|
||||||
|
X36639523Y-92524819D01*
|
||||||
|
X36639523Y-92524819D02*
|
||||||
|
X36544285Y-92572438D01*
|
||||||
|
X36544285Y-92572438D02*
|
||||||
|
X36449047Y-92667676D01*
|
||||||
|
X36449047Y-92667676D02*
|
||||||
|
X36401428Y-92858152D01*
|
||||||
|
X36401428Y-92858152D02*
|
||||||
|
X36401428Y-93191485D01*
|
||||||
|
X36401428Y-93191485D02*
|
||||||
|
X36449047Y-93381961D01*
|
||||||
|
X36449047Y-93381961D02*
|
||||||
|
X36544285Y-93477200D01*
|
||||||
|
X36544285Y-93477200D02*
|
||||||
|
X36639523Y-93524819D01*
|
||||||
|
X36639523Y-93524819D02*
|
||||||
|
X36829999Y-93524819D01*
|
||||||
|
X36829999Y-93524819D02*
|
||||||
|
X36925237Y-93477200D01*
|
||||||
|
X36925237Y-93477200D02*
|
||||||
|
X37020475Y-93381961D01*
|
||||||
|
X37020475Y-93381961D02*
|
||||||
|
X37068094Y-93191485D01*
|
||||||
|
X37068094Y-93191485D02*
|
||||||
|
X37068094Y-92858152D01*
|
||||||
|
X37068094Y-92858152D02*
|
||||||
|
X37020475Y-92667676D01*
|
||||||
|
X37020475Y-92667676D02*
|
||||||
|
X36925237Y-92572438D01*
|
||||||
|
X36925237Y-92572438D02*
|
||||||
|
X36829999Y-92524819D01*
|
||||||
|
X35972856Y-93524819D02*
|
||||||
|
X35972856Y-92524819D01*
|
||||||
|
X35972856Y-92524819D02*
|
||||||
|
X35734761Y-92524819D01*
|
||||||
|
X35734761Y-92524819D02*
|
||||||
|
X35591904Y-92572438D01*
|
||||||
|
X35591904Y-92572438D02*
|
||||||
|
X35496666Y-92667676D01*
|
||||||
|
X35496666Y-92667676D02*
|
||||||
|
X35449047Y-92762914D01*
|
||||||
|
X35449047Y-92762914D02*
|
||||||
|
X35401428Y-92953390D01*
|
||||||
|
X35401428Y-92953390D02*
|
||||||
|
X35401428Y-93096247D01*
|
||||||
|
X35401428Y-93096247D02*
|
||||||
|
X35449047Y-93286723D01*
|
||||||
|
X35449047Y-93286723D02*
|
||||||
|
X35496666Y-93381961D01*
|
||||||
|
X35496666Y-93381961D02*
|
||||||
|
X35591904Y-93477200D01*
|
||||||
|
X35591904Y-93477200D02*
|
||||||
|
X35734761Y-93524819D01*
|
||||||
|
X35734761Y-93524819D02*
|
||||||
|
X35972856Y-93524819D01*
|
||||||
|
X34449047Y-93524819D02*
|
||||||
|
X35020475Y-93524819D01*
|
||||||
|
X34734761Y-93524819D02*
|
||||||
|
X34734761Y-92524819D01*
|
||||||
|
X34734761Y-92524819D02*
|
||||||
|
X34829999Y-92667676D01*
|
||||||
|
X34829999Y-92667676D02*
|
||||||
|
X34925237Y-92762914D01*
|
||||||
|
X34925237Y-92762914D02*
|
||||||
|
X35020475Y-92810533D01*
|
||||||
|
%TO.C,MOD1*%
|
||||||
|
D11*
|
||||||
|
X640000Y-47860000D02*
|
||||||
|
X6990000Y-47860000D01*
|
||||||
|
X640000Y-59540000D02*
|
||||||
|
X640000Y-47860000D01*
|
||||||
|
X5090000Y-79610000D02*
|
||||||
|
X6990000Y-79610000D01*
|
||||||
|
X5090000Y-88750000D02*
|
||||||
|
X5090000Y-79610000D01*
|
||||||
|
X6990000Y-38330000D02*
|
||||||
|
X71640000Y-38330000D01*
|
||||||
|
X6990000Y-47860000D02*
|
||||||
|
X6990000Y-38330000D01*
|
||||||
|
X6990000Y-59540000D02*
|
||||||
|
X640000Y-59540000D01*
|
||||||
|
X6990000Y-79610000D02*
|
||||||
|
X6990000Y-59540000D01*
|
||||||
|
X6990000Y-88750000D02*
|
||||||
|
X5090000Y-88750000D01*
|
||||||
|
X6990000Y-91930000D02*
|
||||||
|
X6990000Y-88750000D01*
|
||||||
|
X71640000Y-38330000D02*
|
||||||
|
X73290000Y-39980000D01*
|
||||||
|
X73290000Y-39980000D02*
|
||||||
|
X73290000Y-51410000D01*
|
||||||
|
X73290000Y-51410000D02*
|
||||||
|
X75830000Y-53950000D01*
|
||||||
|
X73290000Y-89260000D02*
|
||||||
|
X73290000Y-91930000D01*
|
||||||
|
X73290000Y-91930000D02*
|
||||||
|
X6990000Y-91930000D01*
|
||||||
|
X75830000Y-53950000D02*
|
||||||
|
X75830000Y-86720000D01*
|
||||||
|
X75830000Y-86720000D02*
|
||||||
|
X73290000Y-89260000D01*
|
||||||
|
%TD*%
|
||||||
|
M02*
|
||||||
@ -0,0 +1,121 @@
|
|||||||
|
Ref,Val,Package,PosX,PosY,Rot,Side
|
||||||
|
"MOD1","simpleRTK2B-Pro-socket","Arduino_UNO_R3",35.060000,-89.260000,0.000000,bottom
|
||||||
|
"C3","47uF","CP_Elec_6.3x7.7",74.500000,-8.200000,90.000000,top
|
||||||
|
"C5","100nF","C_0603_1608Metric",12.000000,-76.000000,0.000000,top
|
||||||
|
"C7","100nF","C_0603_1608Metric",16.000000,-76.000000,0.000000,top
|
||||||
|
"C9","100nF","C_0603_1608Metric",21.400000,-43.000000,0.000000,top
|
||||||
|
"C10","47uF/50V","CP_Elec_6.3x7.7",9.500000,-31.500000,0.000000,top
|
||||||
|
"C11","100nF","C_0603_1608Metric",82.000000,-10.900000,0.000000,top
|
||||||
|
"C22","22uF/50V","C_1210_3225Metric",81.500000,-4.975000,90.000000,top
|
||||||
|
"C23","22uF/16V","C_0805_2012Metric",99.550000,-10.900000,0.000000,top
|
||||||
|
"C24","100nF","C_0603_1608Metric",38.725000,-72.000000,0.000000,top
|
||||||
|
"C30","10uF","C_0805_2012Metric",20.000000,-58.000000,0.000000,top
|
||||||
|
"C31","2.2uF","C_0603_1608Metric",32.225000,-57.000000,0.000000,top
|
||||||
|
"C32","47uF","C_1210_3225Metric",40.475000,-64.000000,0.000000,top
|
||||||
|
"C33","47uF","C_1210_3225Metric",45.975000,-64.000000,0.000000,top
|
||||||
|
"C34","10uF","C_0805_2012Metric",50.800000,-64.000000,0.000000,top
|
||||||
|
"C35","22uF","C_0805_2012Metric",50.000000,-56.000000,0.000000,top
|
||||||
|
"C40","22uF","C_0805_2012Metric",99.500000,-56.000000,-90.000000,top
|
||||||
|
"C41","22uF","C_0805_2012Metric",118.500000,-62.950000,-90.000000,top
|
||||||
|
"C43","100uF/6.3V","CP_Elec_6.3x7.7",105.000000,-82.000000,0.000000,top
|
||||||
|
"Cbst","10nF","C_0603_1608Metric",88.225000,-5.000000,0.000000,top
|
||||||
|
"Cbst2","10nF","C_0603_1608Metric",107.725000,-69.500000,0.000000,top
|
||||||
|
"Ccomp","2.2nF","C_0603_1608Metric",95.650000,-13.150000,-90.000000,top
|
||||||
|
"Ccomp2","2.2nF","C_0603_1608Metric",107.775000,-74.500000,0.000000,top
|
||||||
|
"Cu3","100nF","C_0603_1608Metric",52.725000,-72.000000,0.000000,top
|
||||||
|
"Cu4","100nF","C_0603_1608Metric",56.725000,-72.000000,0.000000,top
|
||||||
|
"D1","LED","LED_0805_2012Metric",20.000000,-76.000000,0.000000,top
|
||||||
|
"D2","SS34","D_SMA",14.000000,-58.000000,0.000000,top
|
||||||
|
"D5","BAT54","D_SOD-123",15.000000,-43.000000,0.000000,top
|
||||||
|
"D6","1N4148W","D_SOD-123",119.500000,-21.500000,180.000000,top
|
||||||
|
"D10","SMBJ33A","D_SMB",11.000000,-21.500000,0.000000,top
|
||||||
|
"DB1","LED","LED_0805_2012Metric",114.062500,-4.000000,0.000000,top
|
||||||
|
"DB2","LED","LED_0805_2012Metric",118.062500,-4.000000,0.000000,top
|
||||||
|
"DB3","LED","LED_0805_2012Metric",122.062500,-4.000000,0.000000,top
|
||||||
|
"DB4","LED","LED_0805_2012Metric",126.062500,-4.000000,0.000000,top
|
||||||
|
"Dbk","SS34","D_SMA",88.000000,-25.500000,-90.000000,top
|
||||||
|
"Dbk2","SS34","D_SMA",108.300000,-63.500000,0.000000,top
|
||||||
|
"DzG","BZX84C15","SOT-23",19.000000,-21.000000,0.000000,top
|
||||||
|
"F1","PPTC 3A","Fuse_1812_4532Metric",67.000000,-6.000000,0.000000,top
|
||||||
|
"H3","USART1-RSV","PinHeader_1x03_P2.54mm_Vertical",31.000000,-6.000000,0.000000,top
|
||||||
|
"J1","Blackpill-L","PinSocket_1x20_P2.54mm_Vertical",27.000000,-16.000000,90.000000,top
|
||||||
|
"J2","Blackpill-R","PinSocket_1x20_P2.54mm_Vertical",27.000000,-33.780000,90.000000,top
|
||||||
|
"J7","XBEE-ROW-1 (VCC/DOUT/DIN)","PinSocket_1x10_P2.00mm_Vertical",94.000000,-34.500000,0.000000,top
|
||||||
|
"J8","XBEE-ROW-2","PinSocket_1x10_P2.00mm_Vertical",116.350000,-34.500000,0.000000,top
|
||||||
|
"K1","G5V-1 DC5","Relay_SPDT_Omron_G5V-1",109.092500,-15.542500,0.000000,top
|
||||||
|
"L2","10uH","L_Bourns-SRU8028_8.0x8.0mm",107.100000,-7.500000,0.000000,top
|
||||||
|
"L6","2.2uH/8A","L_Bourns-SRU8028_8.0x8.0mm",87.500000,-64.500000,0.000000,top
|
||||||
|
"L7","10uH/2A","L_Bourns-SRU8028_8.0x8.0mm",87.500000,-78.000000,0.000000,top
|
||||||
|
"MH1","MountingHole_3.2mm","MountingHole_3.2mm",5.000000,-5.000000,0.000000,top
|
||||||
|
"MH2","MountingHole_3.2mm","MountingHole_3.2mm",131.000000,-5.000000,0.000000,top
|
||||||
|
"MH3","MountingHole_3.2mm","MountingHole_3.2mm",5.000000,-95.000000,0.000000,top
|
||||||
|
"MH4","MountingHole_3.2mm","MountingHole_3.2mm",131.000000,-95.000000,0.000000,top
|
||||||
|
"P1","GX16-5","TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal",92.500000,-93.500000,0.000000,top
|
||||||
|
"P2","5V-IN-SD15B05","JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical",47.000000,-6.000000,0.000000,top
|
||||||
|
"P3","RTK2B-UART1","JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical",130.000000,-55.000000,90.000000,top
|
||||||
|
"P4","BATT-1S4P+NTC","JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical",130.000000,-68.000000,90.000000,top
|
||||||
|
"P5","TEMP_PROBE","JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical",18.000000,-6.000000,0.000000,top
|
||||||
|
"P6","FAN","JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical",130.000000,-21.500000,90.000000,top
|
||||||
|
"P8","PANEL_LED","JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical",129.975000,-30.500000,90.000000,top
|
||||||
|
"P10","RESET-EXT","JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical",129.975000,-39.750000,90.000000,top
|
||||||
|
"P11","CUTOFF-SW","JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical",55.600000,-6.000000,0.000000,top
|
||||||
|
"P12","NTC-HOTSPOT","JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical",130.000000,-81.000000,90.000000,top
|
||||||
|
"P13","MODO-B-UPLINK","JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical",36.000000,-6.000000,0.000000,top
|
||||||
|
"Q1","AO3401A","SOT-23",74.062500,-24.000000,0.000000,top
|
||||||
|
"Q2","AO3400A","SOT-23",26.000000,-56.000000,0.000000,top
|
||||||
|
"Q4","AO3400A","SOT-23",12.562500,-65.500000,0.000000,top
|
||||||
|
"Q5","MMBT3904","SOT-23",66.562500,-24.000000,0.000000,top
|
||||||
|
"Q6","MMBT3904","SOT-23",103.000000,-23.000000,0.000000,top
|
||||||
|
"Q7","AO4406A","SOIC-8_3.9x4.9mm_P1.27mm",32.525000,-46.905000,0.000000,top
|
||||||
|
"Q10","IRFR5305","TO-252-2",10.000000,-14.000000,0.000000,top
|
||||||
|
"R1","1k","R_0603_1608Metric",83.675000,-19.000000,0.000000,top
|
||||||
|
"R2","10k","R_0603_1608Metric",87.175000,-19.000000,0.000000,top
|
||||||
|
"R3","1k","R_0603_1608Metric",17.675000,-67.000000,0.000000,top
|
||||||
|
"R5","10k","R_0603_1608Metric",12.050000,-72.000000,0.000000,top
|
||||||
|
"R6","10k","R_0603_1608Metric",18.550000,-72.000000,0.000000,top
|
||||||
|
"R7","10k","R_0603_1608Metric",22.725000,-72.000000,0.000000,top
|
||||||
|
"R8","10k","R_0603_1608Metric",26.725000,-72.000000,0.000000,top
|
||||||
|
"R20","100k","R_0603_1608Metric",93.675000,-5.000000,0.000000,top
|
||||||
|
"R21","19.1k","R_0603_1608Metric",96.900000,-5.000000,0.000000,top
|
||||||
|
"R30","4.7k","R_0603_1608Metric",44.725000,-72.000000,0.000000,top
|
||||||
|
"R31","4.7k","R_0603_1608Metric",48.725000,-72.000000,0.000000,top
|
||||||
|
"R40","1k","R_0603_1608Metric",98.175000,-29.000000,-90.000000,top
|
||||||
|
"R41","10k","R_0603_1608Metric",98.000000,-24.500000,0.000000,top
|
||||||
|
"R42","10k/1%","R_0603_1608Metric",34.725000,-72.000000,0.000000,top
|
||||||
|
"R50","825R/1%","R_0603_1608Metric",32.175000,-62.000000,0.000000,top
|
||||||
|
"R51","287k/1%","R_0603_1608Metric",24.675000,-62.000000,0.000000,top
|
||||||
|
"R52","100k/1%","R_0603_1608Metric",28.175000,-62.000000,0.000000,top
|
||||||
|
"R53","499k/1%","R_0603_1608Metric",54.675000,-51.000000,0.000000,top
|
||||||
|
"R54","100k/1%","R_0603_1608Metric",54.675000,-55.000000,0.000000,top
|
||||||
|
"R55","10k/1%","R_0603_1608Metric",21.675000,-67.000000,0.000000,top
|
||||||
|
"R56","100k","R_0603_1608Metric",25.675000,-67.000000,0.000000,top
|
||||||
|
"R57","100k","R_0603_1608Metric",54.675000,-59.500000,0.000000,top
|
||||||
|
"R58","100k","R_0603_1608Metric",54.800000,-64.000000,0.000000,top
|
||||||
|
"R60","100k/1%","R_0603_1608Metric",99.325000,-62.000000,0.000000,top
|
||||||
|
"R61","31.6k/1%","R_0603_1608Metric",99.325000,-67.000000,0.000000,top
|
||||||
|
"RB1","330R","R_0603_1608Metric",114.062500,-8.000000,0.000000,top
|
||||||
|
"RB2","330R","R_0603_1608Metric",118.062500,-8.000000,0.000000,top
|
||||||
|
"RB3","330R","R_0603_1608Metric",122.062500,-8.000000,0.000000,top
|
||||||
|
"RB4","330R","R_0603_1608Metric",126.062500,-8.000000,0.000000,top
|
||||||
|
"RS1","8mR/1%","R_1206_3216Metric",20.000000,-48.000000,0.000000,top
|
||||||
|
"Rcomp","40.2k","R_0603_1608Metric",95.650000,-8.300000,-90.000000,top
|
||||||
|
"Rcomp2","40.2k","R_0603_1608Metric",99.500000,-76.000000,0.000000,top
|
||||||
|
"Rdfu","22k","R_0603_1608Metric",30.725000,-72.000000,0.000000,top
|
||||||
|
"Ren1","100k","R_0603_1608Metric",94.000000,-19.000000,0.000000,top
|
||||||
|
"Ren2","20k","R_0603_1608Metric",98.000000,-19.000000,0.000000,top
|
||||||
|
"Rfreq","100k","R_0603_1608Metric",80.944300,-15.232100,90.000000,top
|
||||||
|
"Rfreq2","100k","R_0603_1608Metric",99.325000,-71.500000,0.000000,top
|
||||||
|
"Rg","100R","R_0603_1608Metric",14.000000,-54.000000,0.000000,top
|
||||||
|
"Rgs","100k","R_0603_1608Metric",19.000000,-54.000000,0.000000,top
|
||||||
|
"Rig","100R","R_0603_1608Metric",21.175000,-29.000000,180.000000,top
|
||||||
|
"Rigb","10k","R_0603_1608Metric",21.175000,-34.000000,180.000000,top
|
||||||
|
"Rled","10k","R_0603_1608Metric",15.225000,-72.000000,0.000000,top
|
||||||
|
"Rrp","10k","R_0603_1608Metric",5.000000,-21.000000,0.000000,top
|
||||||
|
"Rtp","10k","R_0603_1608Metric",20.675000,-62.000000,0.000000,top
|
||||||
|
"Rts","1k","R_0603_1608Metric",16.675000,-62.000000,0.000000,top
|
||||||
|
"SW1","RESET","SW_PUSH_6mm",119.000000,-93.000000,0.000000,top
|
||||||
|
"U2","MP1584EN","SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm",89.025000,-12.405000,180.000000,top
|
||||||
|
"U3","SHT40-AD1B","Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad",44.000000,-78.000000,0.000000,top
|
||||||
|
"U4","TMP102","SOT-563",50.000000,-78.000000,0.000000,top
|
||||||
|
"U6","LTC4040EUFD","QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm",41.550000,-54.000000,0.000000,top
|
||||||
|
"U7","MP1584EN","SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm",117.430000,-72.250000,180.000000,top
|
||||||
|
@ -0,0 +1,26 @@
|
|||||||
|
%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*%
|
||||||
|
%TF.CreationDate,2026-07-04T22:43:43-06:00*%
|
||||||
|
%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,rev?*%
|
||||||
|
%TF.SameCoordinates,Original*%
|
||||||
|
%TF.FileFunction,Profile,NP*%
|
||||||
|
%FSLAX46Y46*%
|
||||||
|
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
|
||||||
|
G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-04 22:43:43*
|
||||||
|
%MOMM*%
|
||||||
|
%LPD*%
|
||||||
|
G01*
|
||||||
|
G04 APERTURE LIST*
|
||||||
|
%TA.AperFunction,Profile*%
|
||||||
|
%ADD10C,0.100000*%
|
||||||
|
%TD*%
|
||||||
|
G04 APERTURE END LIST*
|
||||||
|
D10*
|
||||||
|
X0Y0D02*
|
||||||
|
X135000000Y0D01*
|
||||||
|
X0Y-100000000D02*
|
||||||
|
X0Y0D01*
|
||||||
|
X135000000Y0D02*
|
||||||
|
X135000000Y-100000000D01*
|
||||||
|
X135000000Y-100000000D02*
|
||||||
|
X0Y-100000000D01*
|
||||||
|
M02*
|
||||||
21307
03-Architecture-Hardware/kicad/fab-jlcpcb/hbox-watchdog-v3-PROD-F_Cu.gtl
Normal file
21307
03-Architecture-Hardware/kicad/fab-jlcpcb/hbox-watchdog-v3-PROD-F_Cu.gtl
Normal file
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,946 @@
|
|||||||
|
%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*%
|
||||||
|
%TF.CreationDate,2026-07-04T22:43:43-06:00*%
|
||||||
|
%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,rev?*%
|
||||||
|
%TF.SameCoordinates,Original*%
|
||||||
|
%TF.FileFunction,Soldermask,Top*%
|
||||||
|
%TF.FilePolarity,Negative*%
|
||||||
|
%FSLAX46Y46*%
|
||||||
|
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
|
||||||
|
G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-04 22:43:43*
|
||||||
|
%MOMM*%
|
||||||
|
%LPD*%
|
||||||
|
G01*
|
||||||
|
G04 APERTURE LIST*
|
||||||
|
G04 Aperture macros list*
|
||||||
|
%AMRoundRect*
|
||||||
|
0 Rectangle with rounded corners*
|
||||||
|
0 $1 Rounding radius*
|
||||||
|
0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
|
||||||
|
0 Add a 4 corners polygon primitive as box body*
|
||||||
|
4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
|
||||||
|
0 Add four circle primitives for the rounded corners*
|
||||||
|
1,1,$1+$1,$2,$3*
|
||||||
|
1,1,$1+$1,$4,$5*
|
||||||
|
1,1,$1+$1,$6,$7*
|
||||||
|
1,1,$1+$1,$8,$9*
|
||||||
|
0 Add four rect primitives between the rounded corners*
|
||||||
|
20,1,$1+$1,$2,$3,$4,$5,0*
|
||||||
|
20,1,$1+$1,$4,$5,$6,$7,0*
|
||||||
|
20,1,$1+$1,$6,$7,$8,$9,0*
|
||||||
|
20,1,$1+$1,$8,$9,$2,$3,0*%
|
||||||
|
%AMFreePoly0*
|
||||||
|
4,1,23,0.550000,-0.750000,0.000000,-0.750000,0.000000,-0.745722,-0.065263,-0.745722,-0.191342,-0.711940,-0.304381,-0.646677,-0.396677,-0.554381,-0.461940,-0.441342,-0.495722,-0.315263,-0.495722,-0.250000,-0.500000,-0.250000,-0.500000,0.250000,-0.495722,0.250000,-0.495722,0.315263,-0.461940,0.441342,-0.396677,0.554381,-0.304381,0.646677,-0.191342,0.711940,-0.065263,0.745722,0.000000,0.745722,
|
||||||
|
0.000000,0.750000,0.550000,0.750000,0.550000,-0.750000,0.550000,-0.750000,$1*%
|
||||||
|
%AMFreePoly1*
|
||||||
|
4,1,23,0.000000,0.745722,0.065263,0.745722,0.191342,0.711940,0.304381,0.646677,0.396677,0.554381,0.461940,0.441342,0.495722,0.315263,0.495722,0.250000,0.500000,0.250000,0.500000,-0.250000,0.495722,-0.250000,0.495722,-0.315263,0.461940,-0.441342,0.396677,-0.554381,0.304381,-0.646677,0.191342,-0.711940,0.065263,-0.745722,0.000000,-0.745722,0.000000,-0.750000,-0.550000,-0.750000,
|
||||||
|
-0.550000,0.750000,0.000000,0.750000,0.000000,0.745722,0.000000,0.745722,$1*%
|
||||||
|
%AMFreePoly2*
|
||||||
|
4,1,23,0.500000,-0.750000,0.000000,-0.750000,0.000000,-0.745722,-0.065263,-0.745722,-0.191342,-0.711940,-0.304381,-0.646677,-0.396677,-0.554381,-0.461940,-0.441342,-0.495722,-0.315263,-0.495722,-0.250000,-0.500000,-0.250000,-0.500000,0.250000,-0.495722,0.250000,-0.495722,0.315263,-0.461940,0.441342,-0.396677,0.554381,-0.304381,0.646677,-0.191342,0.711940,-0.065263,0.745722,0.000000,0.745722,
|
||||||
|
0.000000,0.750000,0.500000,0.750000,0.500000,-0.750000,0.500000,-0.750000,$1*%
|
||||||
|
%AMFreePoly3*
|
||||||
|
4,1,23,0.000000,0.745722,0.065263,0.745722,0.191342,0.711940,0.304381,0.646677,0.396677,0.554381,0.461940,0.441342,0.495722,0.315263,0.495722,0.250000,0.500000,0.250000,0.500000,-0.250000,0.495722,-0.250000,0.495722,-0.315263,0.461940,-0.441342,0.396677,-0.554381,0.304381,-0.646677,0.191342,-0.711940,0.065263,-0.745722,0.000000,-0.745722,0.000000,-0.750000,-0.500000,-0.750000,
|
||||||
|
-0.500000,0.750000,0.000000,0.750000,0.000000,0.745722,0.000000,0.745722,$1*%
|
||||||
|
G04 Aperture macros list end*
|
||||||
|
%ADD10RoundRect,0.200000X-0.200000X-0.275000X0.200000X-0.275000X0.200000X0.275000X-0.200000X0.275000X0*%
|
||||||
|
%ADD11RoundRect,0.250000X-0.600000X-0.725000X0.600000X-0.725000X0.600000X0.725000X-0.600000X0.725000X0*%
|
||||||
|
%ADD12O,1.700000X1.950000*%
|
||||||
|
%ADD13RoundRect,0.200000X0.200000X0.275000X-0.200000X0.275000X-0.200000X-0.275000X0.200000X-0.275000X0*%
|
||||||
|
%ADD14RoundRect,0.250000X-0.650000X1.000000X-0.650000X-1.000000X0.650000X-1.000000X0.650000X1.000000X0*%
|
||||||
|
%ADD15RoundRect,0.250000X-0.725000X0.600000X-0.725000X-0.600000X0.725000X-0.600000X0.725000X0.600000X0*%
|
||||||
|
%ADD16O,1.950000X1.700000*%
|
||||||
|
%ADD17RoundRect,0.243750X-0.243750X-0.456250X0.243750X-0.456250X0.243750X0.456250X-0.243750X0.456250X0*%
|
||||||
|
%ADD18RoundRect,0.250000X0.725000X-0.600000X0.725000X0.600000X-0.725000X0.600000X-0.725000X-0.600000X0*%
|
||||||
|
%ADD19RoundRect,0.250000X-0.750000X0.600000X-0.750000X-0.600000X0.750000X-0.600000X0.750000X0.600000X0*%
|
||||||
|
%ADD20O,2.000000X1.700000*%
|
||||||
|
%ADD21RoundRect,0.225000X-0.250000X0.225000X-0.250000X-0.225000X0.250000X-0.225000X0.250000X0.225000X0*%
|
||||||
|
%ADD22RoundRect,0.150000X0.825000X0.150000X-0.825000X0.150000X-0.825000X-0.150000X0.825000X-0.150000X0*%
|
||||||
|
%ADD23R,2.290000X3.000000*%
|
||||||
|
%ADD24R,1.700000X1.700000*%
|
||||||
|
%ADD25C,1.700000*%
|
||||||
|
%ADD26RoundRect,0.225000X-0.225000X-0.250000X0.225000X-0.250000X0.225000X0.250000X-0.225000X0.250000X0*%
|
||||||
|
%ADD27RoundRect,0.250000X-0.600000X-0.750000X0.600000X-0.750000X0.600000X0.750000X-0.600000X0.750000X0*%
|
||||||
|
%ADD28O,1.700000X2.000000*%
|
||||||
|
%ADD29RoundRect,0.150000X-0.587500X-0.150000X0.587500X-0.150000X0.587500X0.150000X-0.587500X0.150000X0*%
|
||||||
|
%ADD30RoundRect,0.150000X-0.825000X-0.150000X0.825000X-0.150000X0.825000X0.150000X-0.825000X0.150000X0*%
|
||||||
|
%ADD31RoundRect,0.250000X-0.250000X-0.475000X0.250000X-0.475000X0.250000X0.475000X-0.250000X0.475000X0*%
|
||||||
|
%ADD32R,0.500000X0.300000*%
|
||||||
|
%ADD33RoundRect,0.250000X-0.475000X0.250000X-0.475000X-0.250000X0.475000X-0.250000X0.475000X0.250000X0*%
|
||||||
|
%ADD34R,1.350000X1.350000*%
|
||||||
|
%ADD35C,1.350000*%
|
||||||
|
%ADD36RoundRect,0.250000X-1.000000X-0.650000X1.000000X-0.650000X1.000000X0.650000X-1.000000X0.650000X0*%
|
||||||
|
%ADD37RoundRect,0.250000X-0.312500X-0.625000X0.312500X-0.625000X0.312500X0.625000X-0.312500X0.625000X0*%
|
||||||
|
%ADD38C,6.000000*%
|
||||||
|
%ADD39RoundRect,0.250000X-1.000000X-0.900000X1.000000X-0.900000X1.000000X0.900000X-1.000000X0.900000X0*%
|
||||||
|
%ADD40RoundRect,0.200000X-0.275000X0.200000X-0.275000X-0.200000X0.275000X-0.200000X0.275000X0.200000X0*%
|
||||||
|
%ADD41R,2.000000X3.200000*%
|
||||||
|
%ADD42RoundRect,0.087500X-0.250000X-0.087500X0.250000X-0.087500X0.250000X0.087500X-0.250000X0.087500X0*%
|
||||||
|
%ADD43C,1.500000*%
|
||||||
|
%ADD44RoundRect,0.250000X1.100000X-0.325000X1.100000X0.325000X-1.100000X0.325000X-1.100000X-0.325000X0*%
|
||||||
|
%ADD45FreePoly0,0.000000*%
|
||||||
|
%ADD46R,1.000000X1.500000*%
|
||||||
|
%ADD47FreePoly1,0.000000*%
|
||||||
|
%ADD48FreePoly2,0.000000*%
|
||||||
|
%ADD49FreePoly3,0.000000*%
|
||||||
|
%ADD50RoundRect,0.250000X0.750000X-0.600000X0.750000X0.600000X-0.750000X0.600000X-0.750000X-0.600000X0*%
|
||||||
|
%ADD51RoundRect,0.250000X-0.325000X-1.100000X0.325000X-1.100000X0.325000X1.100000X-0.325000X1.100000X0*%
|
||||||
|
%ADD52RoundRect,0.250000X-1.050000X1.050000X-1.050000X-1.050000X1.050000X-1.050000X1.050000X1.050000X0*%
|
||||||
|
%ADD53C,2.600000*%
|
||||||
|
%ADD54RoundRect,0.250000X-0.312500X-1.450000X0.312500X-1.450000X0.312500X1.450000X-0.312500X1.450000X0*%
|
||||||
|
%ADD55R,2.000000X2.000000*%
|
||||||
|
%ADD56C,2.000000*%
|
||||||
|
%ADD57RoundRect,0.250000X-1.500000X-0.550000X1.500000X-0.550000X1.500000X0.550000X-1.500000X0.550000X0*%
|
||||||
|
%ADD58RoundRect,0.062500X-0.362500X-0.062500X0.362500X-0.062500X0.362500X0.062500X-0.362500X0.062500X0*%
|
||||||
|
%ADD59RoundRect,0.062500X-0.062500X-0.362500X0.062500X-0.362500X0.062500X0.362500X-0.062500X0.362500X0*%
|
||||||
|
%ADD60R,2.650000X3.650000*%
|
||||||
|
%ADD61RoundRect,0.250000X-0.850000X-0.350000X0.850000X-0.350000X0.850000X0.350000X-0.850000X0.350000X0*%
|
||||||
|
%ADD62RoundRect,0.249997X-2.950003X-2.650003X2.950003X-2.650003X2.950003X2.650003X-2.950003X2.650003X0*%
|
||||||
|
%ADD63RoundRect,0.250000X0.550000X-1.500000X0.550000X1.500000X-0.550000X1.500000X-0.550000X-1.500000X0*%
|
||||||
|
%ADD64RoundRect,0.225000X-0.225000X-0.375000X0.225000X-0.375000X0.225000X0.375000X-0.225000X0.375000X0*%
|
||||||
|
%ADD65RoundRect,0.200000X0.275000X-0.200000X0.275000X0.200000X-0.275000X0.200000X-0.275000X-0.200000X0*%
|
||||||
|
%ADD66RoundRect,0.225000X0.225000X0.375000X-0.225000X0.375000X-0.225000X-0.375000X0.225000X-0.375000X0*%
|
||||||
|
%ADD67R,1.600000X1.600000*%
|
||||||
|
%ADD68O,1.600000X1.600000*%
|
||||||
|
G04 APERTURE END LIST*
|
||||||
|
%TO.C,JP4*%
|
||||||
|
G36*
|
||||||
|
X60450000Y-58750000D02*
|
||||||
|
G01*
|
||||||
|
X61950000Y-58750000D01*
|
||||||
|
X61950000Y-60250000D01*
|
||||||
|
X60450000Y-60250000D01*
|
||||||
|
X60450000Y-58750000D01*
|
||||||
|
G37*
|
||||||
|
%TO.C,JP1*%
|
||||||
|
G36*
|
||||||
|
X85200000Y-39250000D02*
|
||||||
|
G01*
|
||||||
|
X85500000Y-39250000D01*
|
||||||
|
X85500000Y-40750000D01*
|
||||||
|
X85200000Y-40750000D01*
|
||||||
|
X85200000Y-39250000D01*
|
||||||
|
G37*
|
||||||
|
%TO.C,JP3*%
|
||||||
|
G36*
|
||||||
|
X60450000Y-53750000D02*
|
||||||
|
G01*
|
||||||
|
X61950000Y-53750000D01*
|
||||||
|
X61950000Y-55250000D01*
|
||||||
|
X60450000Y-55250000D01*
|
||||||
|
X60450000Y-53750000D01*
|
||||||
|
G37*
|
||||||
|
%TO.C,JP2*%
|
||||||
|
G36*
|
||||||
|
X60450000Y-49250000D02*
|
||||||
|
G01*
|
||||||
|
X61950000Y-49250000D01*
|
||||||
|
X61950000Y-50750000D01*
|
||||||
|
X60450000Y-50750000D01*
|
||||||
|
X60450000Y-49250000D01*
|
||||||
|
G37*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R2*%
|
||||||
|
X86350000Y-19000000D03*
|
||||||
|
X88000000Y-19000000D03*
|
||||||
|
%TD*%
|
||||||
|
D11*
|
||||||
|
%TO.C,P13*%
|
||||||
|
X36000000Y-6000000D03*
|
||||||
|
D12*
|
||||||
|
X38500000Y-6000000D03*
|
||||||
|
X41000000Y-6000000D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,Rigb*%
|
||||||
|
X22000000Y-34000000D03*
|
||||||
|
X20350000Y-34000000D03*
|
||||||
|
%TD*%
|
||||||
|
D14*
|
||||||
|
%TO.C,Dbk*%
|
||||||
|
X88000000Y-23500000D03*
|
||||||
|
X88000000Y-27500000D03*
|
||||||
|
%TD*%
|
||||||
|
D15*
|
||||||
|
%TO.C,P6*%
|
||||||
|
X130000000Y-21500000D03*
|
||||||
|
D16*
|
||||||
|
X130000000Y-19000000D03*
|
||||||
|
X130000000Y-16500000D03*
|
||||||
|
X130000000Y-14000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,Ren2*%
|
||||||
|
X97175000Y-19000000D03*
|
||||||
|
X98825000Y-19000000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,DB2*%
|
||||||
|
X117125000Y-4000000D03*
|
||||||
|
X119000000Y-4000000D03*
|
||||||
|
%TD*%
|
||||||
|
D18*
|
||||||
|
%TO.C,P4*%
|
||||||
|
X130000000Y-68000000D03*
|
||||||
|
D16*
|
||||||
|
X130000000Y-65500000D03*
|
||||||
|
X130000000Y-63000000D03*
|
||||||
|
%TD*%
|
||||||
|
D19*
|
||||||
|
%TO.C,P10*%
|
||||||
|
X129975000Y-39750000D03*
|
||||||
|
D20*
|
||||||
|
X129975000Y-37250000D03*
|
||||||
|
%TD*%
|
||||||
|
D21*
|
||||||
|
%TO.C,Ccomp*%
|
||||||
|
X95650000Y-12375000D03*
|
||||||
|
X95650000Y-13925000D03*
|
||||||
|
%TD*%
|
||||||
|
D22*
|
||||||
|
%TO.C,U7*%
|
||||||
|
X119905000Y-74155000D03*
|
||||||
|
X119905000Y-72885000D03*
|
||||||
|
X119905000Y-71615000D03*
|
||||||
|
X119905000Y-70345000D03*
|
||||||
|
X114955000Y-70345000D03*
|
||||||
|
X114955000Y-71615000D03*
|
||||||
|
X114955000Y-72885000D03*
|
||||||
|
X114955000Y-74155000D03*
|
||||||
|
D23*
|
||||||
|
X117430000Y-72250000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,DB1*%
|
||||||
|
X113125000Y-4000000D03*
|
||||||
|
X115000000Y-4000000D03*
|
||||||
|
%TD*%
|
||||||
|
D24*
|
||||||
|
%TO.C,J1*%
|
||||||
|
X27000000Y-16000000D03*
|
||||||
|
D25*
|
||||||
|
X29540000Y-16000000D03*
|
||||||
|
X32080000Y-16000000D03*
|
||||||
|
X34620000Y-16000000D03*
|
||||||
|
X37160000Y-16000000D03*
|
||||||
|
X39700000Y-16000000D03*
|
||||||
|
X42240000Y-16000000D03*
|
||||||
|
X44780000Y-16000000D03*
|
||||||
|
X47320000Y-16000000D03*
|
||||||
|
X49860000Y-16000000D03*
|
||||||
|
X52400000Y-16000000D03*
|
||||||
|
X54940000Y-16000000D03*
|
||||||
|
X57480000Y-16000000D03*
|
||||||
|
X60020000Y-16000000D03*
|
||||||
|
X62560000Y-16000000D03*
|
||||||
|
X65100000Y-16000000D03*
|
||||||
|
X67640000Y-16000000D03*
|
||||||
|
X70180000Y-16000000D03*
|
||||||
|
X72720000Y-16000000D03*
|
||||||
|
X75260000Y-16000000D03*
|
||||||
|
%TD*%
|
||||||
|
D26*
|
||||||
|
%TO.C,Ccomp2*%
|
||||||
|
X107000000Y-74500000D03*
|
||||||
|
X108550000Y-74500000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R5*%
|
||||||
|
X11225000Y-72000000D03*
|
||||||
|
X12875000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D27*
|
||||||
|
%TO.C,P11*%
|
||||||
|
X55600000Y-6000000D03*
|
||||||
|
D28*
|
||||||
|
X58100000Y-6000000D03*
|
||||||
|
%TD*%
|
||||||
|
D29*
|
||||||
|
%TO.C,Q1*%
|
||||||
|
X73125000Y-23050000D03*
|
||||||
|
X73125000Y-24950000D03*
|
||||||
|
X75000000Y-24000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,Rg*%
|
||||||
|
X13175000Y-54000000D03*
|
||||||
|
X14825000Y-54000000D03*
|
||||||
|
%TD*%
|
||||||
|
D30*
|
||||||
|
%TO.C,Q7*%
|
||||||
|
X30050000Y-45000000D03*
|
||||||
|
X30050000Y-46270000D03*
|
||||||
|
X30050000Y-47540000D03*
|
||||||
|
X30050000Y-48810000D03*
|
||||||
|
X35000000Y-48810000D03*
|
||||||
|
X35000000Y-47540000D03*
|
||||||
|
X35000000Y-46270000D03*
|
||||||
|
X35000000Y-45000000D03*
|
||||||
|
%TD*%
|
||||||
|
D31*
|
||||||
|
%TO.C,C34*%
|
||||||
|
X49850000Y-64000000D03*
|
||||||
|
X51750000Y-64000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R31*%
|
||||||
|
X47900000Y-72000000D03*
|
||||||
|
X49550000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,Rfreq2*%
|
||||||
|
X98500000Y-71500000D03*
|
||||||
|
X100150000Y-71500000D03*
|
||||||
|
%TD*%
|
||||||
|
D32*
|
||||||
|
%TO.C,U3*%
|
||||||
|
X43300000Y-77600000D03*
|
||||||
|
X43300000Y-78400000D03*
|
||||||
|
X44700000Y-78400000D03*
|
||||||
|
X44700000Y-77600000D03*
|
||||||
|
%TD*%
|
||||||
|
D33*
|
||||||
|
%TO.C,C40*%
|
||||||
|
X99500000Y-55050000D03*
|
||||||
|
X99500000Y-56950000D03*
|
||||||
|
%TD*%
|
||||||
|
D34*
|
||||||
|
%TO.C,J7*%
|
||||||
|
X94000000Y-34500000D03*
|
||||||
|
D35*
|
||||||
|
X94000000Y-36500000D03*
|
||||||
|
X94000000Y-38500000D03*
|
||||||
|
X94000000Y-40500000D03*
|
||||||
|
X94000000Y-42500000D03*
|
||||||
|
X94000000Y-44500000D03*
|
||||||
|
X94000000Y-46500000D03*
|
||||||
|
X94000000Y-48500000D03*
|
||||||
|
X94000000Y-50500000D03*
|
||||||
|
X94000000Y-52500000D03*
|
||||||
|
%TD*%
|
||||||
|
D36*
|
||||||
|
%TO.C,D2*%
|
||||||
|
X12000000Y-58000000D03*
|
||||||
|
X16000000Y-58000000D03*
|
||||||
|
%TD*%
|
||||||
|
D37*
|
||||||
|
%TO.C,RS1*%
|
||||||
|
X18537500Y-48000000D03*
|
||||||
|
X21462500Y-48000000D03*
|
||||||
|
%TD*%
|
||||||
|
D26*
|
||||||
|
%TO.C,Cu3*%
|
||||||
|
X51950000Y-72000000D03*
|
||||||
|
X53500000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R3*%
|
||||||
|
X16850000Y-67000000D03*
|
||||||
|
X18500000Y-67000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R60*%
|
||||||
|
X98500000Y-62000000D03*
|
||||||
|
X100150000Y-62000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,Rdfu*%
|
||||||
|
X29900000Y-72000000D03*
|
||||||
|
X31550000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D38*
|
||||||
|
%TO.C,MH3*%
|
||||||
|
X5000000Y-95000000D03*
|
||||||
|
%TD*%
|
||||||
|
D39*
|
||||||
|
%TO.C,D10*%
|
||||||
|
X8850000Y-21500000D03*
|
||||||
|
X13150000Y-21500000D03*
|
||||||
|
%TD*%
|
||||||
|
D40*
|
||||||
|
%TO.C,Rcomp*%
|
||||||
|
X95650000Y-7475000D03*
|
||||||
|
X95650000Y-9125000D03*
|
||||||
|
%TD*%
|
||||||
|
D29*
|
||||||
|
%TO.C,Q5*%
|
||||||
|
X65625000Y-23050000D03*
|
||||||
|
X65625000Y-24950000D03*
|
||||||
|
X67500000Y-24000000D03*
|
||||||
|
%TD*%
|
||||||
|
D26*
|
||||||
|
%TO.C,C7*%
|
||||||
|
X15225000Y-76000000D03*
|
||||||
|
X16775000Y-76000000D03*
|
||||||
|
%TD*%
|
||||||
|
D38*
|
||||||
|
%TO.C,MH4*%
|
||||||
|
X131000000Y-95000000D03*
|
||||||
|
%TD*%
|
||||||
|
D27*
|
||||||
|
%TO.C,P2*%
|
||||||
|
X47000000Y-6000000D03*
|
||||||
|
D28*
|
||||||
|
X49500000Y-6000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R20*%
|
||||||
|
X92850000Y-5000000D03*
|
||||||
|
X94500000Y-5000000D03*
|
||||||
|
%TD*%
|
||||||
|
D26*
|
||||||
|
%TO.C,Cbst2*%
|
||||||
|
X106950000Y-69500000D03*
|
||||||
|
X108500000Y-69500000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,Rts*%
|
||||||
|
X15850000Y-62000000D03*
|
||||||
|
X17500000Y-62000000D03*
|
||||||
|
%TD*%
|
||||||
|
D29*
|
||||||
|
%TO.C,Q2*%
|
||||||
|
X25062500Y-55050000D03*
|
||||||
|
X25062500Y-56950000D03*
|
||||||
|
X26937500Y-56000000D03*
|
||||||
|
%TD*%
|
||||||
|
D26*
|
||||||
|
%TO.C,Cbst*%
|
||||||
|
X87450000Y-5000000D03*
|
||||||
|
X89000000Y-5000000D03*
|
||||||
|
%TD*%
|
||||||
|
D24*
|
||||||
|
%TO.C,H3*%
|
||||||
|
X31000000Y-6000000D03*
|
||||||
|
D25*
|
||||||
|
X31000000Y-8540000D03*
|
||||||
|
X31000000Y-11080000D03*
|
||||||
|
%TD*%
|
||||||
|
D41*
|
||||||
|
%TO.C,L6*%
|
||||||
|
X83600000Y-64500000D03*
|
||||||
|
X91400000Y-64500000D03*
|
||||||
|
%TD*%
|
||||||
|
D31*
|
||||||
|
%TO.C,C35*%
|
||||||
|
X49050000Y-56000000D03*
|
||||||
|
X50950000Y-56000000D03*
|
||||||
|
%TD*%
|
||||||
|
D42*
|
||||||
|
%TO.C,U4*%
|
||||||
|
X49287500Y-77500000D03*
|
||||||
|
X49287500Y-78000000D03*
|
||||||
|
X49287500Y-78500000D03*
|
||||||
|
X50712500Y-78500000D03*
|
||||||
|
X50712500Y-78000000D03*
|
||||||
|
X50712500Y-77500000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,RB3*%
|
||||||
|
X121237500Y-8000000D03*
|
||||||
|
X122887500Y-8000000D03*
|
||||||
|
%TD*%
|
||||||
|
D43*
|
||||||
|
%TO.C,TP1*%
|
||||||
|
X33000000Y-67000000D03*
|
||||||
|
%TD*%
|
||||||
|
D41*
|
||||||
|
%TO.C,L2*%
|
||||||
|
X103200000Y-7500000D03*
|
||||||
|
X111000000Y-7500000D03*
|
||||||
|
%TD*%
|
||||||
|
D26*
|
||||||
|
%TO.C,C9*%
|
||||||
|
X20625000Y-43000000D03*
|
||||||
|
X22175000Y-43000000D03*
|
||||||
|
%TD*%
|
||||||
|
D34*
|
||||||
|
%TO.C,J8*%
|
||||||
|
X116350000Y-34500000D03*
|
||||||
|
D35*
|
||||||
|
X116350000Y-36500000D03*
|
||||||
|
X116350000Y-38500000D03*
|
||||||
|
X116350000Y-40500000D03*
|
||||||
|
X116350000Y-42500000D03*
|
||||||
|
X116350000Y-44500000D03*
|
||||||
|
X116350000Y-46500000D03*
|
||||||
|
X116350000Y-48500000D03*
|
||||||
|
X116350000Y-50500000D03*
|
||||||
|
X116350000Y-52500000D03*
|
||||||
|
%TD*%
|
||||||
|
D22*
|
||||||
|
%TO.C,U2*%
|
||||||
|
X91500000Y-14310000D03*
|
||||||
|
X91500000Y-13040000D03*
|
||||||
|
X91500000Y-11770000D03*
|
||||||
|
X91500000Y-10500000D03*
|
||||||
|
X86550000Y-10500000D03*
|
||||||
|
X86550000Y-11770000D03*
|
||||||
|
X86550000Y-13040000D03*
|
||||||
|
X86550000Y-14310000D03*
|
||||||
|
D23*
|
||||||
|
X89025000Y-12405000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,RB4*%
|
||||||
|
X125237500Y-8000000D03*
|
||||||
|
X126887500Y-8000000D03*
|
||||||
|
%TD*%
|
||||||
|
D44*
|
||||||
|
%TO.C,C22*%
|
||||||
|
X81500000Y-6450000D03*
|
||||||
|
X81500000Y-3500000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R61*%
|
||||||
|
X98500000Y-67000000D03*
|
||||||
|
X100150000Y-67000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R1*%
|
||||||
|
X82850000Y-19000000D03*
|
||||||
|
X84500000Y-19000000D03*
|
||||||
|
%TD*%
|
||||||
|
D11*
|
||||||
|
%TO.C,P5*%
|
||||||
|
X18000000Y-6000000D03*
|
||||||
|
D12*
|
||||||
|
X20500000Y-6000000D03*
|
||||||
|
X23000000Y-6000000D03*
|
||||||
|
X25500000Y-6000000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,DB3*%
|
||||||
|
X121125000Y-4000000D03*
|
||||||
|
X123000000Y-4000000D03*
|
||||||
|
%TD*%
|
||||||
|
D33*
|
||||||
|
%TO.C,C41*%
|
||||||
|
X118500000Y-62000000D03*
|
||||||
|
X118500000Y-63900000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R55*%
|
||||||
|
X20850000Y-67000000D03*
|
||||||
|
X22500000Y-67000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,Rled*%
|
||||||
|
X14400000Y-72000000D03*
|
||||||
|
X16050000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D45*
|
||||||
|
%TO.C,JP4*%
|
||||||
|
X59900000Y-59500000D03*
|
||||||
|
D46*
|
||||||
|
X61200000Y-59500000D03*
|
||||||
|
D47*
|
||||||
|
X62500000Y-59500000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,Rgs*%
|
||||||
|
X18175000Y-54000000D03*
|
||||||
|
X19825000Y-54000000D03*
|
||||||
|
%TD*%
|
||||||
|
D19*
|
||||||
|
%TO.C,P8*%
|
||||||
|
X129975000Y-30500000D03*
|
||||||
|
D20*
|
||||||
|
X129975000Y-28000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R41*%
|
||||||
|
X97175000Y-24500000D03*
|
||||||
|
X98825000Y-24500000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,DB4*%
|
||||||
|
X125125000Y-4000000D03*
|
||||||
|
X127000000Y-4000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,RB2*%
|
||||||
|
X117237500Y-8000000D03*
|
||||||
|
X118887500Y-8000000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,D1*%
|
||||||
|
X19062500Y-76000000D03*
|
||||||
|
X20937500Y-76000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,Rtp*%
|
||||||
|
X19850000Y-62000000D03*
|
||||||
|
X21500000Y-62000000D03*
|
||||||
|
%TD*%
|
||||||
|
D48*
|
||||||
|
%TO.C,JP1*%
|
||||||
|
X84700000Y-40000000D03*
|
||||||
|
D49*
|
||||||
|
X86000000Y-40000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R30*%
|
||||||
|
X43900000Y-72000000D03*
|
||||||
|
X45550000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R6*%
|
||||||
|
X17725000Y-72000000D03*
|
||||||
|
X19375000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D50*
|
||||||
|
%TO.C,P12*%
|
||||||
|
X130000000Y-81000000D03*
|
||||||
|
D20*
|
||||||
|
X130000000Y-78500000D03*
|
||||||
|
%TD*%
|
||||||
|
D51*
|
||||||
|
%TO.C,C32*%
|
||||||
|
X39000000Y-64000000D03*
|
||||||
|
X41950000Y-64000000D03*
|
||||||
|
%TD*%
|
||||||
|
D29*
|
||||||
|
%TO.C,Q4*%
|
||||||
|
X11625000Y-64550000D03*
|
||||||
|
X11625000Y-66450000D03*
|
||||||
|
X13500000Y-65500000D03*
|
||||||
|
%TD*%
|
||||||
|
D52*
|
||||||
|
%TO.C,P1*%
|
||||||
|
X92500000Y-93500000D03*
|
||||||
|
D53*
|
||||||
|
X97500000Y-93500000D03*
|
||||||
|
X102500000Y-93500000D03*
|
||||||
|
X107500000Y-93500000D03*
|
||||||
|
X112500000Y-93500000D03*
|
||||||
|
%TD*%
|
||||||
|
D54*
|
||||||
|
%TO.C,F1*%
|
||||||
|
X64862500Y-6000000D03*
|
||||||
|
X69137500Y-6000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R52*%
|
||||||
|
X27350000Y-62000000D03*
|
||||||
|
X29000000Y-62000000D03*
|
||||||
|
%TD*%
|
||||||
|
D38*
|
||||||
|
%TO.C,MH2*%
|
||||||
|
X131000000Y-5000000D03*
|
||||||
|
%TD*%
|
||||||
|
D55*
|
||||||
|
%TO.C,K1*%
|
||||||
|
X109092500Y-15542500D03*
|
||||||
|
D56*
|
||||||
|
X109092500Y-18082500D03*
|
||||||
|
X109092500Y-25702500D03*
|
||||||
|
X114172500Y-25702500D03*
|
||||||
|
X114172500Y-18082500D03*
|
||||||
|
X114172500Y-15542500D03*
|
||||||
|
%TD*%
|
||||||
|
D24*
|
||||||
|
%TO.C,J2*%
|
||||||
|
X27000000Y-33780000D03*
|
||||||
|
D25*
|
||||||
|
X29540000Y-33780000D03*
|
||||||
|
X32080000Y-33780000D03*
|
||||||
|
X34620000Y-33780000D03*
|
||||||
|
X37160000Y-33780000D03*
|
||||||
|
X39700000Y-33780000D03*
|
||||||
|
X42240000Y-33780000D03*
|
||||||
|
X44780000Y-33780000D03*
|
||||||
|
X47320000Y-33780000D03*
|
||||||
|
X49860000Y-33780000D03*
|
||||||
|
X52400000Y-33780000D03*
|
||||||
|
X54940000Y-33780000D03*
|
||||||
|
X57480000Y-33780000D03*
|
||||||
|
X60020000Y-33780000D03*
|
||||||
|
X62560000Y-33780000D03*
|
||||||
|
X65100000Y-33780000D03*
|
||||||
|
X67640000Y-33780000D03*
|
||||||
|
X70180000Y-33780000D03*
|
||||||
|
X72720000Y-33780000D03*
|
||||||
|
X75260000Y-33780000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R56*%
|
||||||
|
X24850000Y-67000000D03*
|
||||||
|
X26500000Y-67000000D03*
|
||||||
|
%TD*%
|
||||||
|
D26*
|
||||||
|
%TO.C,C11*%
|
||||||
|
X81225000Y-10900000D03*
|
||||||
|
X82775000Y-10900000D03*
|
||||||
|
%TD*%
|
||||||
|
D57*
|
||||||
|
%TO.C,C43*%
|
||||||
|
X102300000Y-82000000D03*
|
||||||
|
X107700000Y-82000000D03*
|
||||||
|
%TD*%
|
||||||
|
D29*
|
||||||
|
%TO.C,DzG*%
|
||||||
|
X18062500Y-20050000D03*
|
||||||
|
X18062500Y-21950000D03*
|
||||||
|
X19937500Y-21000000D03*
|
||||||
|
%TD*%
|
||||||
|
D40*
|
||||||
|
%TO.C,R40*%
|
||||||
|
X98175000Y-28175000D03*
|
||||||
|
X98175000Y-29825000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R42*%
|
||||||
|
X33900000Y-72000000D03*
|
||||||
|
X35550000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D38*
|
||||||
|
%TO.C,MH1*%
|
||||||
|
X5000000Y-5000000D03*
|
||||||
|
%TD*%
|
||||||
|
D58*
|
||||||
|
%TO.C,U6*%
|
||||||
|
X39600000Y-52500000D03*
|
||||||
|
X39600000Y-53000000D03*
|
||||||
|
X39600000Y-53500000D03*
|
||||||
|
X39600000Y-54000000D03*
|
||||||
|
X39600000Y-54500000D03*
|
||||||
|
X39600000Y-55000000D03*
|
||||||
|
X39600000Y-55500000D03*
|
||||||
|
D59*
|
||||||
|
X40550000Y-56450000D03*
|
||||||
|
X41050000Y-56450000D03*
|
||||||
|
X41550000Y-56450000D03*
|
||||||
|
X42050000Y-56450000D03*
|
||||||
|
X42550000Y-56450000D03*
|
||||||
|
D58*
|
||||||
|
X43500000Y-55500000D03*
|
||||||
|
X43500000Y-55000000D03*
|
||||||
|
X43500000Y-54500000D03*
|
||||||
|
X43500000Y-54000000D03*
|
||||||
|
X43500000Y-53500000D03*
|
||||||
|
X43500000Y-53000000D03*
|
||||||
|
X43500000Y-52500000D03*
|
||||||
|
D59*
|
||||||
|
X42550000Y-51550000D03*
|
||||||
|
X42050000Y-51550000D03*
|
||||||
|
X41550000Y-51550000D03*
|
||||||
|
X41050000Y-51550000D03*
|
||||||
|
X40550000Y-51550000D03*
|
||||||
|
D60*
|
||||||
|
X41550000Y-54000000D03*
|
||||||
|
%TD*%
|
||||||
|
D45*
|
||||||
|
%TO.C,JP3*%
|
||||||
|
X59900000Y-54500000D03*
|
||||||
|
D46*
|
||||||
|
X61200000Y-54500000D03*
|
||||||
|
D47*
|
||||||
|
X62500000Y-54500000D03*
|
||||||
|
%TD*%
|
||||||
|
D61*
|
||||||
|
%TO.C,Q10*%
|
||||||
|
X4960000Y-11720000D03*
|
||||||
|
D62*
|
||||||
|
X11260000Y-14000000D03*
|
||||||
|
D61*
|
||||||
|
X4960000Y-16280000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R53*%
|
||||||
|
X53850000Y-51000000D03*
|
||||||
|
X55500000Y-51000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R51*%
|
||||||
|
X23850000Y-62000000D03*
|
||||||
|
X25500000Y-62000000D03*
|
||||||
|
%TD*%
|
||||||
|
D57*
|
||||||
|
%TO.C,C10*%
|
||||||
|
X6800000Y-31500000D03*
|
||||||
|
X12200000Y-31500000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,Rcomp2*%
|
||||||
|
X98675000Y-76000000D03*
|
||||||
|
X100325000Y-76000000D03*
|
||||||
|
%TD*%
|
||||||
|
D56*
|
||||||
|
%TO.C,SW1*%
|
||||||
|
X119000000Y-93000000D03*
|
||||||
|
X125500000Y-93000000D03*
|
||||||
|
X119000000Y-97500000D03*
|
||||||
|
X125500000Y-97500000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R58*%
|
||||||
|
X53975000Y-64000000D03*
|
||||||
|
X55625000Y-64000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,Rrp*%
|
||||||
|
X4175000Y-21000000D03*
|
||||||
|
X5825000Y-21000000D03*
|
||||||
|
%TD*%
|
||||||
|
D29*
|
||||||
|
%TO.C,Q6*%
|
||||||
|
X102062500Y-22050000D03*
|
||||||
|
X102062500Y-23950000D03*
|
||||||
|
X103937500Y-23000000D03*
|
||||||
|
%TD*%
|
||||||
|
D26*
|
||||||
|
%TO.C,C31*%
|
||||||
|
X31450000Y-57000000D03*
|
||||||
|
X33000000Y-57000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R21*%
|
||||||
|
X96075000Y-5000000D03*
|
||||||
|
X97725000Y-5000000D03*
|
||||||
|
%TD*%
|
||||||
|
D31*
|
||||||
|
%TO.C,C30*%
|
||||||
|
X19050000Y-58000000D03*
|
||||||
|
X20950000Y-58000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R7*%
|
||||||
|
X21900000Y-72000000D03*
|
||||||
|
X23550000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D63*
|
||||||
|
%TO.C,C3*%
|
||||||
|
X74500000Y-10900000D03*
|
||||||
|
X74500000Y-5500000D03*
|
||||||
|
%TD*%
|
||||||
|
D64*
|
||||||
|
%TO.C,D5*%
|
||||||
|
X13350000Y-43000000D03*
|
||||||
|
X16650000Y-43000000D03*
|
||||||
|
%TD*%
|
||||||
|
D51*
|
||||||
|
%TO.C,C33*%
|
||||||
|
X44500000Y-64000000D03*
|
||||||
|
X47450000Y-64000000D03*
|
||||||
|
%TD*%
|
||||||
|
D65*
|
||||||
|
%TO.C,Rfreq*%
|
||||||
|
X80944300Y-16057100D03*
|
||||||
|
X80944300Y-14407100D03*
|
||||||
|
%TD*%
|
||||||
|
D18*
|
||||||
|
%TO.C,P3*%
|
||||||
|
X130000000Y-55000000D03*
|
||||||
|
D16*
|
||||||
|
X130000000Y-52500000D03*
|
||||||
|
X130000000Y-50000000D03*
|
||||||
|
X130000000Y-47500000D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,Rig*%
|
||||||
|
X22000000Y-29000000D03*
|
||||||
|
X20350000Y-29000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,RB1*%
|
||||||
|
X113237500Y-8000000D03*
|
||||||
|
X114887500Y-8000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,Ren1*%
|
||||||
|
X93175000Y-19000000D03*
|
||||||
|
X94825000Y-19000000D03*
|
||||||
|
%TD*%
|
||||||
|
D26*
|
||||||
|
%TO.C,C5*%
|
||||||
|
X11225000Y-76000000D03*
|
||||||
|
X12775000Y-76000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R8*%
|
||||||
|
X25900000Y-72000000D03*
|
||||||
|
X27550000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D26*
|
||||||
|
%TO.C,C24*%
|
||||||
|
X37950000Y-72000000D03*
|
||||||
|
X39500000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R54*%
|
||||||
|
X53850000Y-55000000D03*
|
||||||
|
X55500000Y-55000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R57*%
|
||||||
|
X53850000Y-59500000D03*
|
||||||
|
X55500000Y-59500000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R50*%
|
||||||
|
X31350000Y-62000000D03*
|
||||||
|
X33000000Y-62000000D03*
|
||||||
|
%TD*%
|
||||||
|
D36*
|
||||||
|
%TO.C,Dbk2*%
|
||||||
|
X106300000Y-63500000D03*
|
||||||
|
X110300000Y-63500000D03*
|
||||||
|
%TD*%
|
||||||
|
D43*
|
||||||
|
%TO.C,TP2*%
|
||||||
|
X47500000Y-47000000D03*
|
||||||
|
%TD*%
|
||||||
|
D26*
|
||||||
|
%TO.C,Cu4*%
|
||||||
|
X55950000Y-72000000D03*
|
||||||
|
X57500000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D31*
|
||||||
|
%TO.C,C23*%
|
||||||
|
X98600000Y-10900000D03*
|
||||||
|
X100500000Y-10900000D03*
|
||||||
|
%TD*%
|
||||||
|
D45*
|
||||||
|
%TO.C,JP2*%
|
||||||
|
X59900000Y-50000000D03*
|
||||||
|
D46*
|
||||||
|
X61200000Y-50000000D03*
|
||||||
|
D47*
|
||||||
|
X62500000Y-50000000D03*
|
||||||
|
%TD*%
|
||||||
|
D66*
|
||||||
|
%TO.C,D6*%
|
||||||
|
X121150000Y-21500000D03*
|
||||||
|
X117850000Y-21500000D03*
|
||||||
|
%TD*%
|
||||||
|
D41*
|
||||||
|
%TO.C,L7*%
|
||||||
|
X83600000Y-78000000D03*
|
||||||
|
X91400000Y-78000000D03*
|
||||||
|
%TD*%
|
||||||
|
D67*
|
||||||
|
%TO.C,MOD1*%
|
||||||
|
X35060000Y-89260000D03*
|
||||||
|
D68*
|
||||||
|
X37600000Y-89260000D03*
|
||||||
|
X40140000Y-89260000D03*
|
||||||
|
X42680000Y-89260000D03*
|
||||||
|
X45220000Y-89260000D03*
|
||||||
|
X47760000Y-89260000D03*
|
||||||
|
X50300000Y-89260000D03*
|
||||||
|
X52840000Y-89260000D03*
|
||||||
|
X57920000Y-89260000D03*
|
||||||
|
X60460000Y-89260000D03*
|
||||||
|
X63000000Y-89260000D03*
|
||||||
|
X65540000Y-89260000D03*
|
||||||
|
X68080000Y-89260000D03*
|
||||||
|
X70620000Y-89260000D03*
|
||||||
|
X70620000Y-41000000D03*
|
||||||
|
X68080000Y-41000000D03*
|
||||||
|
X65540000Y-41000000D03*
|
||||||
|
X63000000Y-41000000D03*
|
||||||
|
X60460000Y-41000000D03*
|
||||||
|
X57920000Y-41000000D03*
|
||||||
|
X55380000Y-41000000D03*
|
||||||
|
X52840000Y-41000000D03*
|
||||||
|
X48780000Y-41000000D03*
|
||||||
|
X46240000Y-41000000D03*
|
||||||
|
X43700000Y-41000000D03*
|
||||||
|
X41160000Y-41000000D03*
|
||||||
|
X38620000Y-41000000D03*
|
||||||
|
X36080000Y-41000000D03*
|
||||||
|
X33540000Y-41000000D03*
|
||||||
|
X31000000Y-41000000D03*
|
||||||
|
X28460000Y-41000000D03*
|
||||||
|
X25920000Y-41000000D03*
|
||||||
|
%TD*%
|
||||||
|
M02*
|
||||||
@ -0,0 +1,611 @@
|
|||||||
|
%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*%
|
||||||
|
%TF.CreationDate,2026-07-04T22:43:43-06:00*%
|
||||||
|
%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,rev?*%
|
||||||
|
%TF.SameCoordinates,Original*%
|
||||||
|
%TF.FileFunction,Paste,Top*%
|
||||||
|
%TF.FilePolarity,Positive*%
|
||||||
|
%FSLAX46Y46*%
|
||||||
|
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
|
||||||
|
G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-04 22:43:43*
|
||||||
|
%MOMM*%
|
||||||
|
%LPD*%
|
||||||
|
G01*
|
||||||
|
G04 APERTURE LIST*
|
||||||
|
G04 Aperture macros list*
|
||||||
|
%AMRoundRect*
|
||||||
|
0 Rectangle with rounded corners*
|
||||||
|
0 $1 Rounding radius*
|
||||||
|
0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
|
||||||
|
0 Add a 4 corners polygon primitive as box body*
|
||||||
|
4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
|
||||||
|
0 Add four circle primitives for the rounded corners*
|
||||||
|
1,1,$1+$1,$2,$3*
|
||||||
|
1,1,$1+$1,$4,$5*
|
||||||
|
1,1,$1+$1,$6,$7*
|
||||||
|
1,1,$1+$1,$8,$9*
|
||||||
|
0 Add four rect primitives between the rounded corners*
|
||||||
|
20,1,$1+$1,$2,$3,$4,$5,0*
|
||||||
|
20,1,$1+$1,$4,$5,$6,$7,0*
|
||||||
|
20,1,$1+$1,$6,$7,$8,$9,0*
|
||||||
|
20,1,$1+$1,$8,$9,$2,$3,0*%
|
||||||
|
G04 Aperture macros list end*
|
||||||
|
%ADD10RoundRect,0.200000X-0.200000X-0.275000X0.200000X-0.275000X0.200000X0.275000X-0.200000X0.275000X0*%
|
||||||
|
%ADD11RoundRect,0.200000X0.200000X0.275000X-0.200000X0.275000X-0.200000X-0.275000X0.200000X-0.275000X0*%
|
||||||
|
%ADD12RoundRect,0.250000X-0.650000X1.000000X-0.650000X-1.000000X0.650000X-1.000000X0.650000X1.000000X0*%
|
||||||
|
%ADD13RoundRect,0.243750X-0.243750X-0.456250X0.243750X-0.456250X0.243750X0.456250X-0.243750X0.456250X0*%
|
||||||
|
%ADD14RoundRect,0.225000X-0.250000X0.225000X-0.250000X-0.225000X0.250000X-0.225000X0.250000X0.225000X0*%
|
||||||
|
%ADD15RoundRect,0.230000X0.230000X0.375000X-0.230000X0.375000X-0.230000X-0.375000X0.230000X-0.375000X0*%
|
||||||
|
%ADD16RoundRect,0.150000X0.825000X0.150000X-0.825000X0.150000X-0.825000X-0.150000X0.825000X-0.150000X0*%
|
||||||
|
%ADD17RoundRect,0.225000X-0.225000X-0.250000X0.225000X-0.250000X0.225000X0.250000X-0.225000X0.250000X0*%
|
||||||
|
%ADD18RoundRect,0.150000X-0.587500X-0.150000X0.587500X-0.150000X0.587500X0.150000X-0.587500X0.150000X0*%
|
||||||
|
%ADD19RoundRect,0.150000X-0.825000X-0.150000X0.825000X-0.150000X0.825000X0.150000X-0.825000X0.150000X0*%
|
||||||
|
%ADD20RoundRect,0.250000X-0.250000X-0.475000X0.250000X-0.475000X0.250000X0.475000X-0.250000X0.475000X0*%
|
||||||
|
%ADD21R,0.500000X0.300000*%
|
||||||
|
%ADD22RoundRect,0.250000X-0.475000X0.250000X-0.475000X-0.250000X0.475000X-0.250000X0.475000X0.250000X0*%
|
||||||
|
%ADD23RoundRect,0.250000X-1.000000X-0.650000X1.000000X-0.650000X1.000000X0.650000X-1.000000X0.650000X0*%
|
||||||
|
%ADD24RoundRect,0.250000X-0.312500X-0.625000X0.312500X-0.625000X0.312500X0.625000X-0.312500X0.625000X0*%
|
||||||
|
%ADD25RoundRect,0.250000X-1.000000X-0.900000X1.000000X-0.900000X1.000000X0.900000X-1.000000X0.900000X0*%
|
||||||
|
%ADD26RoundRect,0.200000X-0.275000X0.200000X-0.275000X-0.200000X0.275000X-0.200000X0.275000X0.200000X0*%
|
||||||
|
%ADD27R,2.000000X3.200000*%
|
||||||
|
%ADD28RoundRect,0.087500X-0.250000X-0.087500X0.250000X-0.087500X0.250000X0.087500X-0.250000X0.087500X0*%
|
||||||
|
%ADD29RoundRect,0.250000X1.100000X-0.325000X1.100000X0.325000X-1.100000X0.325000X-1.100000X-0.325000X0*%
|
||||||
|
%ADD30RoundRect,0.250000X-0.325000X-1.100000X0.325000X-1.100000X0.325000X1.100000X-0.325000X1.100000X0*%
|
||||||
|
%ADD31RoundRect,0.250000X-0.312500X-1.450000X0.312500X-1.450000X0.312500X1.450000X-0.312500X1.450000X0*%
|
||||||
|
%ADD32RoundRect,0.250000X-1.500000X-0.550000X1.500000X-0.550000X1.500000X0.550000X-1.500000X0.550000X0*%
|
||||||
|
%ADD33RoundRect,0.245000X-0.290000X-0.245000X0.290000X-0.245000X0.290000X0.245000X-0.290000X0.245000X0*%
|
||||||
|
%ADD34RoundRect,0.062500X-0.362500X-0.062500X0.362500X-0.062500X0.362500X0.062500X-0.362500X0.062500X0*%
|
||||||
|
%ADD35RoundRect,0.062500X-0.062500X-0.362500X0.062500X-0.362500X0.062500X0.362500X-0.062500X0.362500X0*%
|
||||||
|
%ADD36RoundRect,0.250000X-1.275000X-1.125000X1.275000X-1.125000X1.275000X1.125000X-1.275000X1.125000X0*%
|
||||||
|
%ADD37RoundRect,0.250000X-0.850000X-0.350000X0.850000X-0.350000X0.850000X0.350000X-0.850000X0.350000X0*%
|
||||||
|
%ADD38RoundRect,0.250000X0.550000X-1.500000X0.550000X1.500000X-0.550000X1.500000X-0.550000X-1.500000X0*%
|
||||||
|
%ADD39RoundRect,0.225000X-0.225000X-0.375000X0.225000X-0.375000X0.225000X0.375000X-0.225000X0.375000X0*%
|
||||||
|
%ADD40RoundRect,0.200000X0.275000X-0.200000X0.275000X0.200000X-0.275000X0.200000X-0.275000X-0.200000X0*%
|
||||||
|
%ADD41RoundRect,0.225000X0.225000X0.375000X-0.225000X0.375000X-0.225000X-0.375000X0.225000X-0.375000X0*%
|
||||||
|
G04 APERTURE END LIST*
|
||||||
|
D10*
|
||||||
|
%TO.C,R2*%
|
||||||
|
X86350000Y-19000000D03*
|
||||||
|
X88000000Y-19000000D03*
|
||||||
|
%TD*%
|
||||||
|
D11*
|
||||||
|
%TO.C,Rigb*%
|
||||||
|
X22000000Y-34000000D03*
|
||||||
|
X20350000Y-34000000D03*
|
||||||
|
%TD*%
|
||||||
|
D12*
|
||||||
|
%TO.C,Dbk*%
|
||||||
|
X88000000Y-23500000D03*
|
||||||
|
X88000000Y-27500000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,Ren2*%
|
||||||
|
X97175000Y-19000000D03*
|
||||||
|
X98825000Y-19000000D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,DB2*%
|
||||||
|
X117125000Y-4000000D03*
|
||||||
|
X119000000Y-4000000D03*
|
||||||
|
%TD*%
|
||||||
|
D14*
|
||||||
|
%TO.C,Ccomp*%
|
||||||
|
X95650000Y-12375000D03*
|
||||||
|
X95650000Y-13925000D03*
|
||||||
|
%TD*%
|
||||||
|
D15*
|
||||||
|
%TO.C,U7*%
|
||||||
|
X118000000Y-73000000D03*
|
||||||
|
X118000000Y-71500000D03*
|
||||||
|
X116860000Y-73000000D03*
|
||||||
|
X116860000Y-71500000D03*
|
||||||
|
D16*
|
||||||
|
X119905000Y-74155000D03*
|
||||||
|
X119905000Y-72885000D03*
|
||||||
|
X119905000Y-71615000D03*
|
||||||
|
X119905000Y-70345000D03*
|
||||||
|
X114955000Y-70345000D03*
|
||||||
|
X114955000Y-71615000D03*
|
||||||
|
X114955000Y-72885000D03*
|
||||||
|
X114955000Y-74155000D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,DB1*%
|
||||||
|
X113125000Y-4000000D03*
|
||||||
|
X115000000Y-4000000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,Ccomp2*%
|
||||||
|
X107000000Y-74500000D03*
|
||||||
|
X108550000Y-74500000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R5*%
|
||||||
|
X11225000Y-72000000D03*
|
||||||
|
X12875000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D18*
|
||||||
|
%TO.C,Q1*%
|
||||||
|
X73125000Y-23050000D03*
|
||||||
|
X73125000Y-24950000D03*
|
||||||
|
X75000000Y-24000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,Rg*%
|
||||||
|
X13175000Y-54000000D03*
|
||||||
|
X14825000Y-54000000D03*
|
||||||
|
%TD*%
|
||||||
|
D19*
|
||||||
|
%TO.C,Q7*%
|
||||||
|
X30050000Y-45000000D03*
|
||||||
|
X30050000Y-46270000D03*
|
||||||
|
X30050000Y-47540000D03*
|
||||||
|
X30050000Y-48810000D03*
|
||||||
|
X35000000Y-48810000D03*
|
||||||
|
X35000000Y-47540000D03*
|
||||||
|
X35000000Y-46270000D03*
|
||||||
|
X35000000Y-45000000D03*
|
||||||
|
%TD*%
|
||||||
|
D20*
|
||||||
|
%TO.C,C34*%
|
||||||
|
X49850000Y-64000000D03*
|
||||||
|
X51750000Y-64000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R31*%
|
||||||
|
X47900000Y-72000000D03*
|
||||||
|
X49550000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,Rfreq2*%
|
||||||
|
X98500000Y-71500000D03*
|
||||||
|
X100150000Y-71500000D03*
|
||||||
|
%TD*%
|
||||||
|
D21*
|
||||||
|
%TO.C,U3*%
|
||||||
|
X43300000Y-77600000D03*
|
||||||
|
X43300000Y-78400000D03*
|
||||||
|
X44700000Y-78400000D03*
|
||||||
|
X44700000Y-77600000D03*
|
||||||
|
%TD*%
|
||||||
|
D22*
|
||||||
|
%TO.C,C40*%
|
||||||
|
X99500000Y-55050000D03*
|
||||||
|
X99500000Y-56950000D03*
|
||||||
|
%TD*%
|
||||||
|
D23*
|
||||||
|
%TO.C,D2*%
|
||||||
|
X12000000Y-58000000D03*
|
||||||
|
X16000000Y-58000000D03*
|
||||||
|
%TD*%
|
||||||
|
D24*
|
||||||
|
%TO.C,RS1*%
|
||||||
|
X18537500Y-48000000D03*
|
||||||
|
X21462500Y-48000000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,Cu3*%
|
||||||
|
X51950000Y-72000000D03*
|
||||||
|
X53500000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R3*%
|
||||||
|
X16850000Y-67000000D03*
|
||||||
|
X18500000Y-67000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R60*%
|
||||||
|
X98500000Y-62000000D03*
|
||||||
|
X100150000Y-62000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,Rdfu*%
|
||||||
|
X29900000Y-72000000D03*
|
||||||
|
X31550000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D25*
|
||||||
|
%TO.C,D10*%
|
||||||
|
X8850000Y-21500000D03*
|
||||||
|
X13150000Y-21500000D03*
|
||||||
|
%TD*%
|
||||||
|
D26*
|
||||||
|
%TO.C,Rcomp*%
|
||||||
|
X95650000Y-7475000D03*
|
||||||
|
X95650000Y-9125000D03*
|
||||||
|
%TD*%
|
||||||
|
D18*
|
||||||
|
%TO.C,Q5*%
|
||||||
|
X65625000Y-23050000D03*
|
||||||
|
X65625000Y-24950000D03*
|
||||||
|
X67500000Y-24000000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,C7*%
|
||||||
|
X15225000Y-76000000D03*
|
||||||
|
X16775000Y-76000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R20*%
|
||||||
|
X92850000Y-5000000D03*
|
||||||
|
X94500000Y-5000000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,Cbst2*%
|
||||||
|
X106950000Y-69500000D03*
|
||||||
|
X108500000Y-69500000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,Rts*%
|
||||||
|
X15850000Y-62000000D03*
|
||||||
|
X17500000Y-62000000D03*
|
||||||
|
%TD*%
|
||||||
|
D18*
|
||||||
|
%TO.C,Q2*%
|
||||||
|
X25062500Y-55050000D03*
|
||||||
|
X25062500Y-56950000D03*
|
||||||
|
X26937500Y-56000000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,Cbst*%
|
||||||
|
X87450000Y-5000000D03*
|
||||||
|
X89000000Y-5000000D03*
|
||||||
|
%TD*%
|
||||||
|
D27*
|
||||||
|
%TO.C,L6*%
|
||||||
|
X83600000Y-64500000D03*
|
||||||
|
X91400000Y-64500000D03*
|
||||||
|
%TD*%
|
||||||
|
D20*
|
||||||
|
%TO.C,C35*%
|
||||||
|
X49050000Y-56000000D03*
|
||||||
|
X50950000Y-56000000D03*
|
||||||
|
%TD*%
|
||||||
|
D28*
|
||||||
|
%TO.C,U4*%
|
||||||
|
X49287500Y-77500000D03*
|
||||||
|
X49287500Y-78000000D03*
|
||||||
|
X49287500Y-78500000D03*
|
||||||
|
X50712500Y-78500000D03*
|
||||||
|
X50712500Y-78000000D03*
|
||||||
|
X50712500Y-77500000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,RB3*%
|
||||||
|
X121237500Y-8000000D03*
|
||||||
|
X122887500Y-8000000D03*
|
||||||
|
%TD*%
|
||||||
|
D27*
|
||||||
|
%TO.C,L2*%
|
||||||
|
X103200000Y-7500000D03*
|
||||||
|
X111000000Y-7500000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,C9*%
|
||||||
|
X20625000Y-43000000D03*
|
||||||
|
X22175000Y-43000000D03*
|
||||||
|
%TD*%
|
||||||
|
D15*
|
||||||
|
%TO.C,U2*%
|
||||||
|
X89595000Y-13155000D03*
|
||||||
|
X89595000Y-11655000D03*
|
||||||
|
X88455000Y-13155000D03*
|
||||||
|
X88455000Y-11655000D03*
|
||||||
|
D16*
|
||||||
|
X91500000Y-14310000D03*
|
||||||
|
X91500000Y-13040000D03*
|
||||||
|
X91500000Y-11770000D03*
|
||||||
|
X91500000Y-10500000D03*
|
||||||
|
X86550000Y-10500000D03*
|
||||||
|
X86550000Y-11770000D03*
|
||||||
|
X86550000Y-13040000D03*
|
||||||
|
X86550000Y-14310000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,RB4*%
|
||||||
|
X125237500Y-8000000D03*
|
||||||
|
X126887500Y-8000000D03*
|
||||||
|
%TD*%
|
||||||
|
D29*
|
||||||
|
%TO.C,C22*%
|
||||||
|
X81500000Y-6450000D03*
|
||||||
|
X81500000Y-3500000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R61*%
|
||||||
|
X98500000Y-67000000D03*
|
||||||
|
X100150000Y-67000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R1*%
|
||||||
|
X82850000Y-19000000D03*
|
||||||
|
X84500000Y-19000000D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,DB3*%
|
||||||
|
X121125000Y-4000000D03*
|
||||||
|
X123000000Y-4000000D03*
|
||||||
|
%TD*%
|
||||||
|
D22*
|
||||||
|
%TO.C,C41*%
|
||||||
|
X118500000Y-62000000D03*
|
||||||
|
X118500000Y-63900000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R55*%
|
||||||
|
X20850000Y-67000000D03*
|
||||||
|
X22500000Y-67000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,Rled*%
|
||||||
|
X14400000Y-72000000D03*
|
||||||
|
X16050000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,Rgs*%
|
||||||
|
X18175000Y-54000000D03*
|
||||||
|
X19825000Y-54000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R41*%
|
||||||
|
X97175000Y-24500000D03*
|
||||||
|
X98825000Y-24500000D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,DB4*%
|
||||||
|
X125125000Y-4000000D03*
|
||||||
|
X127000000Y-4000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,RB2*%
|
||||||
|
X117237500Y-8000000D03*
|
||||||
|
X118887500Y-8000000D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,D1*%
|
||||||
|
X19062500Y-76000000D03*
|
||||||
|
X20937500Y-76000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,Rtp*%
|
||||||
|
X19850000Y-62000000D03*
|
||||||
|
X21500000Y-62000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R30*%
|
||||||
|
X43900000Y-72000000D03*
|
||||||
|
X45550000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R6*%
|
||||||
|
X17725000Y-72000000D03*
|
||||||
|
X19375000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D30*
|
||||||
|
%TO.C,C32*%
|
||||||
|
X39000000Y-64000000D03*
|
||||||
|
X41950000Y-64000000D03*
|
||||||
|
%TD*%
|
||||||
|
D18*
|
||||||
|
%TO.C,Q4*%
|
||||||
|
X11625000Y-64550000D03*
|
||||||
|
X11625000Y-66450000D03*
|
||||||
|
X13500000Y-65500000D03*
|
||||||
|
%TD*%
|
||||||
|
D31*
|
||||||
|
%TO.C,F1*%
|
||||||
|
X64862500Y-6000000D03*
|
||||||
|
X69137500Y-6000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R52*%
|
||||||
|
X27350000Y-62000000D03*
|
||||||
|
X29000000Y-62000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R56*%
|
||||||
|
X24850000Y-67000000D03*
|
||||||
|
X26500000Y-67000000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,C11*%
|
||||||
|
X81225000Y-10900000D03*
|
||||||
|
X82775000Y-10900000D03*
|
||||||
|
%TD*%
|
||||||
|
D32*
|
||||||
|
%TO.C,C43*%
|
||||||
|
X102300000Y-82000000D03*
|
||||||
|
X107700000Y-82000000D03*
|
||||||
|
%TD*%
|
||||||
|
D18*
|
||||||
|
%TO.C,DzG*%
|
||||||
|
X18062500Y-20050000D03*
|
||||||
|
X18062500Y-21950000D03*
|
||||||
|
X19937500Y-21000000D03*
|
||||||
|
%TD*%
|
||||||
|
D26*
|
||||||
|
%TO.C,R40*%
|
||||||
|
X98175000Y-28175000D03*
|
||||||
|
X98175000Y-29825000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R42*%
|
||||||
|
X33900000Y-72000000D03*
|
||||||
|
X35550000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D33*
|
||||||
|
%TO.C,U6*%
|
||||||
|
X40890000Y-52780000D03*
|
||||||
|
X40890000Y-54000000D03*
|
||||||
|
X40890000Y-55220000D03*
|
||||||
|
X42210000Y-52780000D03*
|
||||||
|
X42210000Y-54000000D03*
|
||||||
|
X42210000Y-55220000D03*
|
||||||
|
D34*
|
||||||
|
X39600000Y-52500000D03*
|
||||||
|
X39600000Y-53000000D03*
|
||||||
|
X39600000Y-53500000D03*
|
||||||
|
X39600000Y-54000000D03*
|
||||||
|
X39600000Y-54500000D03*
|
||||||
|
X39600000Y-55000000D03*
|
||||||
|
X39600000Y-55500000D03*
|
||||||
|
D35*
|
||||||
|
X40550000Y-56450000D03*
|
||||||
|
X41050000Y-56450000D03*
|
||||||
|
X41550000Y-56450000D03*
|
||||||
|
X42050000Y-56450000D03*
|
||||||
|
X42550000Y-56450000D03*
|
||||||
|
D34*
|
||||||
|
X43500000Y-55500000D03*
|
||||||
|
X43500000Y-55000000D03*
|
||||||
|
X43500000Y-54500000D03*
|
||||||
|
X43500000Y-54000000D03*
|
||||||
|
X43500000Y-53500000D03*
|
||||||
|
X43500000Y-53000000D03*
|
||||||
|
X43500000Y-52500000D03*
|
||||||
|
D35*
|
||||||
|
X42550000Y-51550000D03*
|
||||||
|
X42050000Y-51550000D03*
|
||||||
|
X41550000Y-51550000D03*
|
||||||
|
X41050000Y-51550000D03*
|
||||||
|
X40550000Y-51550000D03*
|
||||||
|
%TD*%
|
||||||
|
D36*
|
||||||
|
%TO.C,Q10*%
|
||||||
|
X9585000Y-12475000D03*
|
||||||
|
X9585000Y-15525000D03*
|
||||||
|
X12935000Y-12475000D03*
|
||||||
|
X12935000Y-15525000D03*
|
||||||
|
D37*
|
||||||
|
X4960000Y-11720000D03*
|
||||||
|
X4960000Y-16280000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R53*%
|
||||||
|
X53850000Y-51000000D03*
|
||||||
|
X55500000Y-51000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R51*%
|
||||||
|
X23850000Y-62000000D03*
|
||||||
|
X25500000Y-62000000D03*
|
||||||
|
%TD*%
|
||||||
|
D32*
|
||||||
|
%TO.C,C10*%
|
||||||
|
X6800000Y-31500000D03*
|
||||||
|
X12200000Y-31500000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,Rcomp2*%
|
||||||
|
X98675000Y-76000000D03*
|
||||||
|
X100325000Y-76000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R58*%
|
||||||
|
X53975000Y-64000000D03*
|
||||||
|
X55625000Y-64000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,Rrp*%
|
||||||
|
X4175000Y-21000000D03*
|
||||||
|
X5825000Y-21000000D03*
|
||||||
|
%TD*%
|
||||||
|
D18*
|
||||||
|
%TO.C,Q6*%
|
||||||
|
X102062500Y-22050000D03*
|
||||||
|
X102062500Y-23950000D03*
|
||||||
|
X103937500Y-23000000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,C31*%
|
||||||
|
X31450000Y-57000000D03*
|
||||||
|
X33000000Y-57000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R21*%
|
||||||
|
X96075000Y-5000000D03*
|
||||||
|
X97725000Y-5000000D03*
|
||||||
|
%TD*%
|
||||||
|
D20*
|
||||||
|
%TO.C,C30*%
|
||||||
|
X19050000Y-58000000D03*
|
||||||
|
X20950000Y-58000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R7*%
|
||||||
|
X21900000Y-72000000D03*
|
||||||
|
X23550000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D38*
|
||||||
|
%TO.C,C3*%
|
||||||
|
X74500000Y-10900000D03*
|
||||||
|
X74500000Y-5500000D03*
|
||||||
|
%TD*%
|
||||||
|
D39*
|
||||||
|
%TO.C,D5*%
|
||||||
|
X13350000Y-43000000D03*
|
||||||
|
X16650000Y-43000000D03*
|
||||||
|
%TD*%
|
||||||
|
D30*
|
||||||
|
%TO.C,C33*%
|
||||||
|
X44500000Y-64000000D03*
|
||||||
|
X47450000Y-64000000D03*
|
||||||
|
%TD*%
|
||||||
|
D40*
|
||||||
|
%TO.C,Rfreq*%
|
||||||
|
X80944300Y-16057100D03*
|
||||||
|
X80944300Y-14407100D03*
|
||||||
|
%TD*%
|
||||||
|
D11*
|
||||||
|
%TO.C,Rig*%
|
||||||
|
X22000000Y-29000000D03*
|
||||||
|
X20350000Y-29000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,RB1*%
|
||||||
|
X113237500Y-8000000D03*
|
||||||
|
X114887500Y-8000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,Ren1*%
|
||||||
|
X93175000Y-19000000D03*
|
||||||
|
X94825000Y-19000000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,C5*%
|
||||||
|
X11225000Y-76000000D03*
|
||||||
|
X12775000Y-76000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R8*%
|
||||||
|
X25900000Y-72000000D03*
|
||||||
|
X27550000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,C24*%
|
||||||
|
X37950000Y-72000000D03*
|
||||||
|
X39500000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,R54*%
|
||||||
|
X53850000Y-55000000D03*
|
||||||
|
X55500000Y-55000000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R57*%
|
||||||
|
X53850000Y-59500000D03*
|
||||||
|
X55500000Y-59500000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R50*%
|
||||||
|
X31350000Y-62000000D03*
|
||||||
|
X33000000Y-62000000D03*
|
||||||
|
%TD*%
|
||||||
|
D23*
|
||||||
|
%TO.C,Dbk2*%
|
||||||
|
X106300000Y-63500000D03*
|
||||||
|
X110300000Y-63500000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,Cu4*%
|
||||||
|
X55950000Y-72000000D03*
|
||||||
|
X57500000Y-72000000D03*
|
||||||
|
%TD*%
|
||||||
|
D20*
|
||||||
|
%TO.C,C23*%
|
||||||
|
X98600000Y-10900000D03*
|
||||||
|
X100500000Y-10900000D03*
|
||||||
|
%TD*%
|
||||||
|
D41*
|
||||||
|
%TO.C,D6*%
|
||||||
|
X121150000Y-21500000D03*
|
||||||
|
X117850000Y-21500000D03*
|
||||||
|
%TD*%
|
||||||
|
D27*
|
||||||
|
%TO.C,L7*%
|
||||||
|
X83600000Y-78000000D03*
|
||||||
|
X91400000Y-78000000D03*
|
||||||
|
%TD*%
|
||||||
|
M02*
|
||||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
Binary file not shown.
@ -0,0 +1,19 @@
|
|||||||
|
M48
|
||||||
|
; DRILL file KiCad 10.0.4 date 2026-07-04T22:43:16
|
||||||
|
; FORMAT={-:-/ absolute / metric / decimal}
|
||||||
|
; #@! TF.CreationDate,2026-07-04T22:43:16-06:00
|
||||||
|
; #@! TF.GenerationSoftware,Kicad,Pcbnew,10.0.4
|
||||||
|
; #@! TF.FileFunction,NonPlated,1,4,NPTH
|
||||||
|
FMAT,2
|
||||||
|
METRIC
|
||||||
|
; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill
|
||||||
|
T1C3.200
|
||||||
|
%
|
||||||
|
G90
|
||||||
|
G05
|
||||||
|
T1
|
||||||
|
X5.0Y-5.0
|
||||||
|
X5.0Y-95.0
|
||||||
|
X131.0Y-5.0
|
||||||
|
X131.0Y-95.0
|
||||||
|
M30
|
||||||
Binary file not shown.
@ -0,0 +1,398 @@
|
|||||||
|
M48
|
||||||
|
; DRILL file KiCad 10.0.4 date 2026-07-04T22:43:16
|
||||||
|
; FORMAT={-:-/ absolute / metric / decimal}
|
||||||
|
; #@! TF.CreationDate,2026-07-04T22:43:16-06:00
|
||||||
|
; #@! TF.GenerationSoftware,Kicad,Pcbnew,10.0.4
|
||||||
|
; #@! TF.FileFunction,Plated,1,4,PTH
|
||||||
|
FMAT,2
|
||||||
|
METRIC
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ViaDrill
|
||||||
|
T1C0.300
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ViaDrill
|
||||||
|
T2C0.400
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
|
||||||
|
T3C0.800
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
|
||||||
|
T4C0.950
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
|
||||||
|
T5C1.000
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
|
||||||
|
T6C1.100
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
|
||||||
|
T7C1.300
|
||||||
|
%
|
||||||
|
G90
|
||||||
|
G05
|
||||||
|
T1
|
||||||
|
X1.45Y-1.45
|
||||||
|
X1.45Y-8.45
|
||||||
|
X1.45Y-15.45
|
||||||
|
X1.45Y-22.45
|
||||||
|
X1.45Y-29.45
|
||||||
|
X1.45Y-36.45
|
||||||
|
X1.45Y-43.45
|
||||||
|
X1.45Y-50.45
|
||||||
|
X1.45Y-57.45
|
||||||
|
X1.45Y-64.45
|
||||||
|
X1.45Y-71.45
|
||||||
|
X1.45Y-78.45
|
||||||
|
X1.45Y-85.45
|
||||||
|
X1.45Y-92.45
|
||||||
|
X8.45Y-1.45
|
||||||
|
X8.45Y-8.45
|
||||||
|
X8.45Y-29.45
|
||||||
|
X8.45Y-36.45
|
||||||
|
X8.45Y-43.45
|
||||||
|
X8.45Y-50.45
|
||||||
|
X8.45Y-57.45
|
||||||
|
X8.45Y-64.45
|
||||||
|
X8.45Y-71.45
|
||||||
|
X8.45Y-78.45
|
||||||
|
X8.45Y-85.45
|
||||||
|
X8.45Y-92.45
|
||||||
|
X10.879Y-21.715
|
||||||
|
X10.905Y-63.736
|
||||||
|
X11.905Y-68.757
|
||||||
|
X12.007Y-27.378
|
||||||
|
X12.738Y-28.289
|
||||||
|
X13.163Y-69.262
|
||||||
|
X13.175Y-53.015
|
||||||
|
X13.957Y-44.078
|
||||||
|
X14.047Y-30.089
|
||||||
|
X14.393Y-6.0
|
||||||
|
X15.45Y-1.45
|
||||||
|
X15.45Y-36.45
|
||||||
|
X15.45Y-50.45
|
||||||
|
X15.45Y-64.45
|
||||||
|
X15.45Y-71.45
|
||||||
|
X15.45Y-78.45
|
||||||
|
X15.45Y-85.45
|
||||||
|
X15.45Y-92.45
|
||||||
|
X16.289Y-31.843
|
||||||
|
X16.441Y-38.348
|
||||||
|
X17.66Y-42.48
|
||||||
|
X17.891Y-33.79
|
||||||
|
X17.966Y-37.746
|
||||||
|
X18.182Y-60.894
|
||||||
|
X18.934Y-62.0
|
||||||
|
X19.282Y-63.128
|
||||||
|
X19.289Y-53.031
|
||||||
|
X19.598Y-67.103
|
||||||
|
X19.825Y-54.0
|
||||||
|
X20.169Y-44.005
|
||||||
|
X20.879Y-74.766
|
||||||
|
X20.95Y-58.0
|
||||||
|
X21.324Y-36.857
|
||||||
|
X21.785Y-35.162
|
||||||
|
X22.398Y-59.893
|
||||||
|
X22.45Y-8.45
|
||||||
|
X22.45Y-78.45
|
||||||
|
X22.45Y-85.45
|
||||||
|
X22.45Y-92.45
|
||||||
|
X22.684Y-40.4
|
||||||
|
X22.729Y-55.139
|
||||||
|
X23.136Y-43.899
|
||||||
|
X24.154Y-30.841
|
||||||
|
X25.289Y-66.014
|
||||||
|
X26.312Y-56.913
|
||||||
|
X26.64Y-71.26
|
||||||
|
X27.463Y-41.986
|
||||||
|
X28.483Y-56.054
|
||||||
|
X29.45Y-22.45
|
||||||
|
X29.45Y-36.45
|
||||||
|
X29.45Y-50.45
|
||||||
|
X29.45Y-57.45
|
||||||
|
X29.45Y-78.45
|
||||||
|
X29.45Y-85.45
|
||||||
|
X29.45Y-92.45
|
||||||
|
X30.586Y-71.216
|
||||||
|
X30.778Y-72.785
|
||||||
|
X32.865Y-51.051
|
||||||
|
X33.0Y-65.721
|
||||||
|
X33.327Y-54.107
|
||||||
|
X33.71Y-62.79
|
||||||
|
X34.455Y-53.879
|
||||||
|
X34.566Y-8.057
|
||||||
|
X35.552Y-65.073
|
||||||
|
X36.45Y-8.45
|
||||||
|
X36.45Y-22.45
|
||||||
|
X36.45Y-36.45
|
||||||
|
X36.45Y-57.45
|
||||||
|
X36.45Y-78.45
|
||||||
|
X36.45Y-85.45
|
||||||
|
X36.45Y-92.45
|
||||||
|
X36.639Y-54.113
|
||||||
|
X36.64Y-69.155
|
||||||
|
X37.76Y-54.48
|
||||||
|
X37.833Y-51.485
|
||||||
|
X40.298Y-27.163
|
||||||
|
X41.811Y-57.429
|
||||||
|
X43.191Y-56.225
|
||||||
|
X43.45Y-8.45
|
||||||
|
X43.45Y-29.45
|
||||||
|
X43.45Y-36.45
|
||||||
|
X43.45Y-43.45
|
||||||
|
X43.45Y-85.45
|
||||||
|
X43.45Y-92.45
|
||||||
|
X43.863Y-51.005
|
||||||
|
X44.001Y-17.152
|
||||||
|
X44.5Y-53.98
|
||||||
|
X44.64Y-55.61
|
||||||
|
X44.96Y-54.67
|
||||||
|
X45.34Y-53.8
|
||||||
|
X45.458Y-51.641
|
||||||
|
X46.423Y-71.392
|
||||||
|
X46.442Y-73.026
|
||||||
|
X46.473Y-57.756
|
||||||
|
X47.13Y-56.53
|
||||||
|
X47.316Y-54.925
|
||||||
|
X47.474Y-52.118
|
||||||
|
X48.378Y-52.118
|
||||||
|
X49.411Y-52.137
|
||||||
|
X50.255Y-52.485
|
||||||
|
X50.45Y-29.45
|
||||||
|
X50.45Y-36.45
|
||||||
|
X50.45Y-71.45
|
||||||
|
X50.45Y-92.45
|
||||||
|
X51.128Y-43.22
|
||||||
|
X51.95Y-70.995
|
||||||
|
X53.238Y-63.263
|
||||||
|
X54.048Y-56.877
|
||||||
|
X54.3Y-58.497
|
||||||
|
X55.04Y-57.69
|
||||||
|
X56.484Y-55.171
|
||||||
|
X57.132Y-48.668
|
||||||
|
X57.45Y-1.45
|
||||||
|
X57.45Y-8.45
|
||||||
|
X57.45Y-71.45
|
||||||
|
X57.45Y-85.45
|
||||||
|
X57.45Y-92.45
|
||||||
|
X57.944Y-57.143
|
||||||
|
X60.351Y-52.157
|
||||||
|
X61.551Y-58.246
|
||||||
|
X64.219Y-56.237
|
||||||
|
X64.45Y-1.45
|
||||||
|
X64.45Y-8.45
|
||||||
|
X64.45Y-71.45
|
||||||
|
X64.45Y-78.45
|
||||||
|
X64.45Y-85.45
|
||||||
|
X64.45Y-92.45
|
||||||
|
X67.47Y-28.721
|
||||||
|
X71.45Y-1.45
|
||||||
|
X71.45Y-64.45
|
||||||
|
X71.45Y-78.45
|
||||||
|
X71.45Y-85.45
|
||||||
|
X71.45Y-92.45
|
||||||
|
X72.025Y-11.227
|
||||||
|
X72.865Y-56.677
|
||||||
|
X72.902Y-24.146
|
||||||
|
X74.524Y-53.037
|
||||||
|
X74.69Y-22.983
|
||||||
|
X75.371Y-20.838
|
||||||
|
X75.927Y-23.083
|
||||||
|
X78.45Y-1.45
|
||||||
|
X78.45Y-8.45
|
||||||
|
X78.45Y-29.45
|
||||||
|
X78.45Y-43.45
|
||||||
|
X78.45Y-71.45
|
||||||
|
X78.45Y-85.45
|
||||||
|
X78.45Y-92.45
|
||||||
|
X80.089Y-20.623
|
||||||
|
X80.502Y-19.359
|
||||||
|
X81.451Y-21.248
|
||||||
|
X83.142Y-37.513
|
||||||
|
X83.6Y-51.54
|
||||||
|
X83.984Y-24.65
|
||||||
|
X84.208Y-68.426
|
||||||
|
X84.31Y-20.002
|
||||||
|
X85.45Y-1.45
|
||||||
|
X85.45Y-8.45
|
||||||
|
X85.45Y-15.45
|
||||||
|
X85.45Y-29.45
|
||||||
|
X85.45Y-50.45
|
||||||
|
X85.848Y-35.606
|
||||||
|
X86.335Y-34.937
|
||||||
|
X86.492Y-23.5
|
||||||
|
X86.55Y-15.118
|
||||||
|
X86.606Y-38.707
|
||||||
|
X88.203Y-5.753
|
||||||
|
X89.546Y-73.764
|
||||||
|
X89.639Y-25.274
|
||||||
|
X90.121Y-15.039
|
||||||
|
X91.425Y-73.154
|
||||||
|
X91.569Y-57.368
|
||||||
|
X93.18Y-9.47
|
||||||
|
X93.215Y-13.023
|
||||||
|
X93.755Y-67.71
|
||||||
|
X94.169Y-19.894
|
||||||
|
X95.492Y-58.136
|
||||||
|
X95.875Y-63.716
|
||||||
|
X97.177Y-67.103
|
||||||
|
X97.354Y-5.979
|
||||||
|
X97.725Y-5.0
|
||||||
|
X99.412Y-9.512
|
||||||
|
X101.283Y-69.175
|
||||||
|
X101.502Y-20.638
|
||||||
|
X103.453Y-11.276
|
||||||
|
X104.911Y-76.468
|
||||||
|
X105.06Y-74.312
|
||||||
|
X106.905Y-75.704
|
||||||
|
X106.95Y-67.394
|
||||||
|
X107.798Y-22.623
|
||||||
|
X108.478Y-62.0
|
||||||
|
X108.5Y-67.293
|
||||||
|
X109.371Y-10.674
|
||||||
|
X110.339Y-9.729
|
||||||
|
X112.784Y-74.429
|
||||||
|
X114.955Y-70.345
|
||||||
|
X115.826Y-8.505
|
||||||
|
X116.699Y-70.221
|
||||||
|
X119.816Y-8.169
|
||||||
|
T2
|
||||||
|
X39.19Y-49.1
|
||||||
|
X46.63Y-48.9
|
||||||
|
X121.96Y-72.87
|
||||||
|
T3
|
||||||
|
X94.0Y-34.5
|
||||||
|
X94.0Y-36.5
|
||||||
|
X94.0Y-38.5
|
||||||
|
X94.0Y-40.5
|
||||||
|
X94.0Y-42.5
|
||||||
|
X94.0Y-44.5
|
||||||
|
X94.0Y-46.5
|
||||||
|
X94.0Y-48.5
|
||||||
|
X94.0Y-50.5
|
||||||
|
X94.0Y-52.5
|
||||||
|
X116.35Y-34.5
|
||||||
|
X116.35Y-36.5
|
||||||
|
X116.35Y-38.5
|
||||||
|
X116.35Y-40.5
|
||||||
|
X116.35Y-42.5
|
||||||
|
X116.35Y-44.5
|
||||||
|
X116.35Y-46.5
|
||||||
|
X116.35Y-48.5
|
||||||
|
X116.35Y-50.5
|
||||||
|
X116.35Y-52.5
|
||||||
|
T4
|
||||||
|
X18.0Y-6.0
|
||||||
|
X20.5Y-6.0
|
||||||
|
X23.0Y-6.0
|
||||||
|
X25.5Y-6.0
|
||||||
|
X36.0Y-6.0
|
||||||
|
X38.5Y-6.0
|
||||||
|
X41.0Y-6.0
|
||||||
|
X130.0Y-14.0
|
||||||
|
X130.0Y-16.5
|
||||||
|
X130.0Y-19.0
|
||||||
|
X130.0Y-21.5
|
||||||
|
X130.0Y-47.5
|
||||||
|
X130.0Y-50.0
|
||||||
|
X130.0Y-52.5
|
||||||
|
X130.0Y-55.0
|
||||||
|
X130.0Y-63.0
|
||||||
|
X130.0Y-65.5
|
||||||
|
X130.0Y-68.0
|
||||||
|
T5
|
||||||
|
X25.92Y-41.0
|
||||||
|
X27.0Y-16.0
|
||||||
|
X27.0Y-33.78
|
||||||
|
X28.46Y-41.0
|
||||||
|
X29.54Y-16.0
|
||||||
|
X29.54Y-33.78
|
||||||
|
X31.0Y-6.0
|
||||||
|
X31.0Y-8.54
|
||||||
|
X31.0Y-11.08
|
||||||
|
X31.0Y-41.0
|
||||||
|
X32.08Y-16.0
|
||||||
|
X32.08Y-33.78
|
||||||
|
X33.54Y-41.0
|
||||||
|
X34.62Y-16.0
|
||||||
|
X34.62Y-33.78
|
||||||
|
X35.06Y-89.26
|
||||||
|
X36.08Y-41.0
|
||||||
|
X37.16Y-16.0
|
||||||
|
X37.16Y-33.78
|
||||||
|
X37.6Y-89.26
|
||||||
|
X38.62Y-41.0
|
||||||
|
X39.7Y-16.0
|
||||||
|
X39.7Y-33.78
|
||||||
|
X40.14Y-89.26
|
||||||
|
X41.16Y-41.0
|
||||||
|
X42.24Y-16.0
|
||||||
|
X42.24Y-33.78
|
||||||
|
X42.68Y-89.26
|
||||||
|
X43.7Y-41.0
|
||||||
|
X44.78Y-16.0
|
||||||
|
X44.78Y-33.78
|
||||||
|
X45.22Y-89.26
|
||||||
|
X46.24Y-41.0
|
||||||
|
X47.0Y-6.0
|
||||||
|
X47.32Y-16.0
|
||||||
|
X47.32Y-33.78
|
||||||
|
X47.76Y-89.26
|
||||||
|
X48.78Y-41.0
|
||||||
|
X49.5Y-6.0
|
||||||
|
X49.86Y-16.0
|
||||||
|
X49.86Y-33.78
|
||||||
|
X50.3Y-89.26
|
||||||
|
X52.4Y-16.0
|
||||||
|
X52.4Y-33.78
|
||||||
|
X52.84Y-41.0
|
||||||
|
X52.84Y-89.26
|
||||||
|
X54.94Y-16.0
|
||||||
|
X54.94Y-33.78
|
||||||
|
X55.38Y-41.0
|
||||||
|
X55.6Y-6.0
|
||||||
|
X57.48Y-16.0
|
||||||
|
X57.48Y-33.78
|
||||||
|
X57.92Y-41.0
|
||||||
|
X57.92Y-89.26
|
||||||
|
X58.1Y-6.0
|
||||||
|
X60.02Y-16.0
|
||||||
|
X60.02Y-33.78
|
||||||
|
X60.46Y-41.0
|
||||||
|
X60.46Y-89.26
|
||||||
|
X62.56Y-16.0
|
||||||
|
X62.56Y-33.78
|
||||||
|
X63.0Y-41.0
|
||||||
|
X63.0Y-89.26
|
||||||
|
X65.1Y-16.0
|
||||||
|
X65.1Y-33.78
|
||||||
|
X65.54Y-41.0
|
||||||
|
X65.54Y-89.26
|
||||||
|
X67.64Y-16.0
|
||||||
|
X67.64Y-33.78
|
||||||
|
X68.08Y-41.0
|
||||||
|
X68.08Y-89.26
|
||||||
|
X70.18Y-16.0
|
||||||
|
X70.18Y-33.78
|
||||||
|
X70.62Y-41.0
|
||||||
|
X70.62Y-89.26
|
||||||
|
X72.72Y-16.0
|
||||||
|
X72.72Y-33.78
|
||||||
|
X75.26Y-16.0
|
||||||
|
X75.26Y-33.78
|
||||||
|
X109.093Y-15.542
|
||||||
|
X109.093Y-18.082
|
||||||
|
X109.093Y-25.703
|
||||||
|
X114.172Y-15.542
|
||||||
|
X114.172Y-18.082
|
||||||
|
X114.172Y-25.703
|
||||||
|
X129.975Y-28.0
|
||||||
|
X129.975Y-30.5
|
||||||
|
X129.975Y-37.25
|
||||||
|
X129.975Y-39.75
|
||||||
|
X130.0Y-78.5
|
||||||
|
X130.0Y-81.0
|
||||||
|
T6
|
||||||
|
X119.0Y-93.0
|
||||||
|
X119.0Y-97.5
|
||||||
|
X125.5Y-93.0
|
||||||
|
X125.5Y-97.5
|
||||||
|
T7
|
||||||
|
X92.5Y-93.5
|
||||||
|
X97.5Y-93.5
|
||||||
|
X102.5Y-93.5
|
||||||
|
X107.5Y-93.5
|
||||||
|
X112.5Y-93.5
|
||||||
|
M30
|
||||||
Binary file not shown.
@ -0,0 +1,170 @@
|
|||||||
|
{
|
||||||
|
"Header": {
|
||||||
|
"GenerationSoftware": {
|
||||||
|
"Vendor": "KiCad",
|
||||||
|
"Application": "Pcbnew",
|
||||||
|
"Version": "10.0.4"
|
||||||
|
},
|
||||||
|
"CreationDate": "2026-07-04T22:43:43-06:00"
|
||||||
|
},
|
||||||
|
"GeneralSpecs": {
|
||||||
|
"ProjectId": {
|
||||||
|
"Name": "hbox-watchdog-v3-PROD",
|
||||||
|
"GUID": "68626f78-2d77-4617-9463-68646f672d76",
|
||||||
|
"Revision": "rev?"
|
||||||
|
},
|
||||||
|
"Size": {
|
||||||
|
"X": 135.1,
|
||||||
|
"Y": 100.1
|
||||||
|
},
|
||||||
|
"LayerNumber": 4,
|
||||||
|
"BoardThickness": 1.6,
|
||||||
|
"Finish": "None"
|
||||||
|
},
|
||||||
|
"DesignRules": [
|
||||||
|
{
|
||||||
|
"Layers": "Outer",
|
||||||
|
"PadToPad": 0.2,
|
||||||
|
"PadToTrack": 0.2,
|
||||||
|
"TrackToTrack": 0.2,
|
||||||
|
"MinLineWidth": 0.2,
|
||||||
|
"TrackToRegion": 0.3,
|
||||||
|
"RegionToRegion": 0.3
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Layers": "Inner",
|
||||||
|
"PadToPad": 0.0,
|
||||||
|
"PadToTrack": 0.0,
|
||||||
|
"TrackToTrack": 0.2,
|
||||||
|
"MinLineWidth": 0.2,
|
||||||
|
"TrackToRegion": 0.3,
|
||||||
|
"RegionToRegion": 0.3
|
||||||
|
}
|
||||||
|
],
|
||||||
|
"FilesAttributes": [
|
||||||
|
{
|
||||||
|
"Path": "hbox-watchdog-v3-PROD-F_Cu.gtl",
|
||||||
|
"FileFunction": "Copper,L1,Top",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "hbox-watchdog-v3-PROD-In1_Cu.g1",
|
||||||
|
"FileFunction": "Copper,L2,Inr",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "hbox-watchdog-v3-PROD-In2_Cu.g2",
|
||||||
|
"FileFunction": "Copper,L3,Inr",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "hbox-watchdog-v3-PROD-B_Cu.gbl",
|
||||||
|
"FileFunction": "Copper,L4,Bot",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "hbox-watchdog-v3-PROD-F_Paste.gtp",
|
||||||
|
"FileFunction": "SolderPaste,Top",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "hbox-watchdog-v3-PROD-B_Paste.gbp",
|
||||||
|
"FileFunction": "SolderPaste,Bot",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "hbox-watchdog-v3-PROD-F_Silkscreen.gto",
|
||||||
|
"FileFunction": "Legend,Top",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "hbox-watchdog-v3-PROD-B_Silkscreen.gbo",
|
||||||
|
"FileFunction": "Legend,Bot",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "hbox-watchdog-v3-PROD-F_Mask.gts",
|
||||||
|
"FileFunction": "SolderMask,Top",
|
||||||
|
"FilePolarity": "Negative"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "hbox-watchdog-v3-PROD-B_Mask.gbs",
|
||||||
|
"FileFunction": "SolderMask,Bot",
|
||||||
|
"FilePolarity": "Negative"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "hbox-watchdog-v3-PROD-Edge_Cuts.gm1",
|
||||||
|
"FileFunction": "Profile",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
}
|
||||||
|
],
|
||||||
|
"MaterialStackup": [
|
||||||
|
{
|
||||||
|
"Type": "Legend",
|
||||||
|
"Name": "Top Silk Screen"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "SolderPaste",
|
||||||
|
"Name": "Top Solder Paste"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "SolderMask",
|
||||||
|
"Thickness": 0.01,
|
||||||
|
"Name": "Top Solder Mask"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "Copper",
|
||||||
|
"Thickness": 0.035,
|
||||||
|
"Name": "F.Cu"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "Dielectric",
|
||||||
|
"Thickness": 0.48,
|
||||||
|
"Material": "FR4",
|
||||||
|
"Name": "F.Cu/In1.Cu",
|
||||||
|
"Notes": "Type: dielectric layer 1 (from F.Cu to In1.Cu)"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "Copper",
|
||||||
|
"Thickness": 0.035,
|
||||||
|
"Name": "In1.Cu"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "Dielectric",
|
||||||
|
"Thickness": 0.48,
|
||||||
|
"Material": "FR4",
|
||||||
|
"Name": "In1.Cu/In2.Cu",
|
||||||
|
"Notes": "Type: dielectric layer 2 (from In1.Cu to In2.Cu)"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "Copper",
|
||||||
|
"Thickness": 0.035,
|
||||||
|
"Name": "In2.Cu"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "Dielectric",
|
||||||
|
"Thickness": 0.48,
|
||||||
|
"Material": "FR4",
|
||||||
|
"Name": "In2.Cu/B.Cu",
|
||||||
|
"Notes": "Type: dielectric layer 3 (from In2.Cu to B.Cu)"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "Copper",
|
||||||
|
"Thickness": 0.035,
|
||||||
|
"Name": "B.Cu"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "SolderMask",
|
||||||
|
"Thickness": 0.01,
|
||||||
|
"Name": "Bottom Solder Mask"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "SolderPaste",
|
||||||
|
"Name": "Bottom Solder Paste"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "Legend",
|
||||||
|
"Name": "Bottom Silk Screen"
|
||||||
|
}
|
||||||
|
]
|
||||||
|
}
|
||||||
File diff suppressed because it is too large
Load Diff
@ -60,16 +60,22 @@
|
|||||||
"hatch_smoothing_level": 0,
|
"hatch_smoothing_level": 0,
|
||||||
"hatch_smoothing_value": 0.1,
|
"hatch_smoothing_value": 0.1,
|
||||||
"hatch_thickness": 1.0,
|
"hatch_thickness": 1.0,
|
||||||
"min_clearance": 0.5,
|
"min_clearance": 0.3,
|
||||||
"min_island_area": 10.0,
|
"min_island_area": 10.0,
|
||||||
"min_thickness": 0.25,
|
"min_thickness": 0.2,
|
||||||
"pad_connection": 1,
|
"pad_connection": 1,
|
||||||
"remove_islands": 0,
|
"remove_islands": 0,
|
||||||
"thermal_relief_gap": 0.5,
|
"thermal_relief_gap": 0.5,
|
||||||
"thermal_relief_spoke_width": 0.5
|
"thermal_relief_spoke_width": 0.5
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"diff_pair_dimensions": [],
|
"diff_pair_dimensions": [
|
||||||
|
{
|
||||||
|
"gap": 0.0,
|
||||||
|
"via_gap": 0.0,
|
||||||
|
"width": 0.0
|
||||||
|
}
|
||||||
|
],
|
||||||
"drc_exclusions": [],
|
"drc_exclusions": [],
|
||||||
"meta": {
|
"meta": {
|
||||||
"version": 2
|
"version": 2
|
||||||
@ -203,7 +209,12 @@
|
|||||||
"td_width_to_size_filter_ratio": 0.9
|
"td_width_to_size_filter_ratio": 0.9
|
||||||
}
|
}
|
||||||
],
|
],
|
||||||
"track_widths": [],
|
"track_widths": [
|
||||||
|
0.0,
|
||||||
|
0.01,
|
||||||
|
0.15,
|
||||||
|
0.25
|
||||||
|
],
|
||||||
"tuning_pattern_settings": {
|
"tuning_pattern_settings": {
|
||||||
"diff_pair_defaults": {
|
"diff_pair_defaults": {
|
||||||
"corner_radius_percentage": 80,
|
"corner_radius_percentage": 80,
|
||||||
@ -230,7 +241,16 @@
|
|||||||
"spacing": 0.6
|
"spacing": 0.6
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"via_dimensions": [],
|
"via_dimensions": [
|
||||||
|
{
|
||||||
|
"diameter": 0.0,
|
||||||
|
"drill": 0.0
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"diameter": 0.3,
|
||||||
|
"drill": 0.15
|
||||||
|
}
|
||||||
|
],
|
||||||
"zones_allow_external_fillets": false
|
"zones_allow_external_fillets": false
|
||||||
},
|
},
|
||||||
"filename": "hbox-watchdog-v3.kicad_pcb",
|
"filename": "hbox-watchdog-v3.kicad_pcb",
|
||||||
|
|||||||
File diff suppressed because one or more lines are too long
@ -0,0 +1 @@
|
|||||||
|
{"hostname":"Leopoldos-MacBook-Pro","username":"leo"}
|
||||||
Loading…
Reference in New Issue
Block a user