(rules PCB hbox-watchdog-v3-PROD-4layer-wideclass-v3
  (snap_angle 
    fortyfive_degree
  )
  (autoroute_settings
    (fanout off)
    (autoroute on)
    (postroute on)
    (vias on)
    (via_costs 50)
    (plane_via_costs 5)
    (start_ripup_costs 100)
    (start_pass_no 11)
    (layer_rule F.Cu
      (active on)
      (preferred_direction horizontal)
      (preferred_direction_trace_costs 1.8)
      (against_preferred_direction_trace_costs 3.1)
    )
    (layer_rule In1.Cu
      (active on)
      (preferred_direction vertical)
      (preferred_direction_trace_costs 1.0)
      (against_preferred_direction_trace_costs 1.7)
    )
    (layer_rule In2.Cu
      (active on)
      (preferred_direction vertical)
      (preferred_direction_trace_costs 1.0)
      (against_preferred_direction_trace_costs 2.3)
    )
    (layer_rule B.Cu
      (active on)
      (preferred_direction horizontal)
      (preferred_direction_trace_costs 1.8)
      (against_preferred_direction_trace_costs 2.5)
    )
  )
  (rule
    (width 200.0)
    (clearance 200.0)
    (clearance 100.0 (type smd_to_turn_gap))
    (clearance 50.0 (type smd))
    (clearance 200.0 (type "kicad_default"))
    (clearance 200.0 (type "PWR_HI"))
    (clearance 200.0 (type "PWR_MID"))
  )
  (padstack "Via[0-3]_600:300_um"
    (shape
      (circle F.Cu 600.0 0.0 0.0)
    )
    (shape
      (circle In1.Cu 600.0 0.0 0.0)
    )
    (shape
      (circle In2.Cu 600.0 0.0 0.0)
    )
    (shape
      (circle B.Cu 600.0 0.0 0.0)
    )
    (attach off)
  )
  (via 
    "Via[0-3]_600:300_um" "Via[0-3]_600:300_um" default
  )
  (via 
    "Via[0-3]_600:300_um-kicad_default" "Via[0-3]_600:300_um" "kicad_default"
  )
  (via 
    "Via[0-3]_600:300_um-PWR_HI" "Via[0-3]_600:300_um" "PWR_HI"
  )
  (via 
    "Via[0-3]_600:300_um-PWR_MID" "Via[0-3]_600:300_um" "PWR_MID"
  )
  (via_rule
    default "Via[0-3]_600:300_um"
  )
  (via_rule
    "kicad_default" "Via[0-3]_600:300_um-kicad_default"
  )
  (via_rule
    "PWR_HI" "Via[0-3]_600:300_um-PWR_HI"
  )
  (via_rule
    "PWR_MID" "Via[0-3]_600:300_um-PWR_MID"
  )
  (class default
    (clearance_class default)
    (via_rule default)
    (rule
      (width 200.0)
    )
    (circuit 
      (use_layer F.Cu In1.Cu In2.Cu B.Cu)
    )
  )
  (class "kicad_default"
    GND "GATE_LS" "USART1_RX" "DIN_4G" "IGN_SENSE" "FAN_TACH_RAW" "EN_FAN" BLED2
    NTC NRST "CC_FAN" COMP3 FB3 FREQ3 BST3 BLED1
    "unconnected-(J1-Pin_1-Pad1)" "unconnected-(J1-Pin_2-Pad2)" "unconnected-(J1-Pin_3-Pad3)" "unconnected-(J1-Pin_4-Pad4)" "BAT_SENSE" "PWR_CTRL" "GNSS_TX" "GNSS_RX"
    "5V_SENSE" "FAN_PWM" "unconnected-(J1-Pin_13-Pad13)" "EXT_LED" "NTC_TEMP" "unconnected-(J1-Pin_16-Pad16)" "FAN_TACH" 3V3
    "COMP3_C" "SW_IN" "FAN_GATE" IGATE "I2C_SDA" "I2C_SCL" "DOUT_4G" "unconnected-(J7-Pin_4-Pad4)"
    "unconnected-(J7-Pin_5-Pad5)" "unconnected-(J7-Pin_6-Pad6)" "unconnected-(J7-Pin_7-Pad7)" "unconnected-(J7-Pin_8-Pad8)" "unconnected-(J7-Pin_9-Pad9)" "LED_A" "COMP_FAN" "BASE_LS"
    "FB_FAN" "BST_FAN" "USART1_TX" "unconnected-(U4-ALERT-Pad3)" BATLED3 BLED3 "CLPROG_TP" "unconnected-(J8-Pin_1-Pad1)"
    "unconnected-(J8-Pin_2-Pad2)" "unconnected-(J8-Pin_3-Pad3)" "unconnected-(J8-Pin_4-Pad4)" "unconnected-(J8-Pin_5-Pad5)" "unconnected-(J8-Pin_6-Pad6)" "unconnected-(J8-Pin_7-Pad7)" "unconnected-(J8-Pin_8-Pad8)" "unconnected-(J8-Pin_9-Pad9)"
    "unconnected-(J8-Pin_10-Pad10)" "FREQ_FAN" BATLED4 BLED4 "F0_SEL" "LED_K" "Q6_BASE" BATLED2
    "unconnected-(P1-Pin_4-Pad4)" "unconnected-(P1-Pin_5-Pad5)" PFI KCOIL BATLED1 "CHRG_EN" "unconnected-(J2-Pin_8-Pad8)" "unconnected-(J2-Pin_9-Pad9)"
    "unconnected-(J2-Pin_10-Pad10)" "CHRG_STAT" "CHRG_FAULT" "BYP_CTRL" "unconnected-(J2-Pin_16-Pad16)" "unconnected-(J2-Pin_17-Pad17)" "Q10_GATE" PROG
    "VFB_BST" "unconnected-(U6-RST-Pad11)" "F2_SEL" "F1_SEL" "PFO_TP" "unconnected-(MOD1-NC-Pad1)" "unconnected-(MOD1-RESET-Pad3)" "unconnected-(MOD1-3V3_OUT-Pad4)"
    "unconnected-(MOD1-VIN-Pad8)" "unconnected-(MOD1-A0-Pad9)" "unconnected-(MOD1-A1-Pad10)" "unconnected-(MOD1-A2-Pad11)" "unconnected-(MOD1-A3-Pad12)" "unconnected-(MOD1-A4-Pad13)" "unconnected-(MOD1-A5-Pad14)" "unconnected-(MOD1-D3-Pad18)"
    "unconnected-(MOD1-D4-Pad19)" "unconnected-(MOD1-D5-Pad20)" "unconnected-(MOD1-D6-Pad21)" "unconnected-(MOD1-D7-Pad22)" "unconnected-(MOD1-D9-Pad24)" "unconnected-(MOD1-D10-Pad25)" "unconnected-(MOD1-FENCE_D11-Pad26)" "unconnected-(MOD1-EXTINT_D12-Pad27)"
    "unconnected-(MOD1-TPS_D13-Pad28)" "unconnected-(MOD1-AREF-Pad30)" "unconnected-(MOD1-SDA-Pad31)" "unconnected-(MOD1-SCL-Pad32)"
    (clearance_class "kicad_default")
    (via_rule "kicad_default")
    (rule
      (width 200.0)
    )
    (circuit 
      (use_layer F.Cu In1.Cu In2.Cu B.Cu)
    )
  )
  (class "PWR_HI"
    SYS5V "BAT_PLUS" MAIN5V "VIN_SW" VEH5V "SW_BAT"
    (clearance_class "PWR_HI")
    (via_rule "PWR_HI")
    (rule
      (width 1500.0)
    )
    (circuit 
      (use_layer F.Cu In1.Cu In2.Cu B.Cu)
    )
  )
  (class "PWR_MID"
    "SW_FAN" "5V_FAN" "FAN_RET" "SW3_NODE" "SW_5V" "3V3_MODEM" "24V_IN" 24V
    "IGN_IN"
    (clearance_class "PWR_MID")
    (via_rule "PWR_MID")
    (rule
      (width 1000.0)
    )
    (circuit 
      (use_layer F.Cu In1.Cu In2.Cu B.Cu)
    )
  )
)