(rules PCB hbox-watchdog-v4-PROD (snap_angle fortyfive_degree ) (autoroute_settings (fanout off) (autoroute on) (postroute on) (vias on) (via_costs 50) (plane_via_costs 5) (start_ripup_costs 100) (start_pass_no 47) (layer_rule F.Cu (active on) (preferred_direction horizontal) (preferred_direction_trace_costs 1.8) (against_preferred_direction_trace_costs 3.3) ) (layer_rule In1.Cu (active on) (preferred_direction vertical) (preferred_direction_trace_costs 1.0) (against_preferred_direction_trace_costs 1.6) ) (layer_rule In2.Cu (active on) (preferred_direction vertical) (preferred_direction_trace_costs 1.0) (against_preferred_direction_trace_costs 2.5) ) (layer_rule B.Cu (active on) (preferred_direction horizontal) (preferred_direction_trace_costs 1.8) (against_preferred_direction_trace_costs 2.4) ) ) (rule (width 200.0) (clearance 200.0) (clearance 100.0 (type smd_to_turn_gap)) (clearance 50.0 (type smd)) (clearance 200.0 (type "kicad_default")) (clearance 200.0 (type "PWR_HI")) (clearance 200.0 (type "PWR_MID")) (clearance 500.0 (type HV24)) ) (padstack "Via[0-3]_600:300_um" (shape (circle F.Cu 600.0 0.0 0.0) ) (shape (circle In1.Cu 600.0 0.0 0.0) ) (shape (circle In2.Cu 600.0 0.0 0.0) ) (shape (circle B.Cu 600.0 0.0 0.0) ) (attach off) ) (padstack "Via[0-3]_800:400_um" (shape (circle F.Cu 800.0 0.0 0.0) ) (shape (circle In1.Cu 800.0 0.0 0.0) ) (shape (circle In2.Cu 800.0 0.0 0.0) ) (shape (circle B.Cu 800.0 0.0 0.0) ) (attach off) ) (via "Via[0-3]_600:300_um" "Via[0-3]_600:300_um" default ) (via "Via[0-3]_800:400_um" "Via[0-3]_800:400_um" default ) (via "Via[0-3]_600:300_um-kicad_default" "Via[0-3]_600:300_um" "kicad_default" ) (via "Via[0-3]_800:400_um-kicad_default" "Via[0-3]_800:400_um" "kicad_default" ) (via "Via[0-3]_600:300_um-PWR_HI" "Via[0-3]_600:300_um" "PWR_HI" ) (via "Via[0-3]_800:400_um-PWR_HI" "Via[0-3]_800:400_um" "PWR_HI" ) (via "Via[0-3]_600:300_um-PWR_MID" "Via[0-3]_600:300_um" "PWR_MID" ) (via "Via[0-3]_800:400_um-PWR_MID" "Via[0-3]_800:400_um" "PWR_MID" ) (via "Via[0-3]_600:300_um-HV24" "Via[0-3]_600:300_um" HV24 ) (via "Via[0-3]_800:400_um-HV24" "Via[0-3]_800:400_um" HV24 ) (via_rule default "Via[0-3]_600:300_um" ) (via_rule "kicad_default" "Via[0-3]_600:300_um-kicad_default" ) (via_rule "PWR_HI" "Via[0-3]_800:400_um-PWR_HI" ) (via_rule "PWR_MID" "Via[0-3]_800:400_um-PWR_MID" ) (via_rule HV24 "Via[0-3]_800:400_um-HV24" ) (class default (clearance_class default) (via_rule default) (rule (width 200.0) ) (circuit (use_layer F.Cu In1.Cu In2.Cu B.Cu) ) ) (class "kicad_default" 3V3 GND "/GATE_LS" "IGN_SENSE" "FAN_TACH_RAW" "/EN_FAN" /BLED2 /NTC /NRST "CC_FAN" "/ETH_TXN" "/ETH_TXP" "/ETH_RXN" "/ETH_RXP" "/ETH_RSET" "/ETH_TOCAP" "/ETH_1V2" "/ETH_LINKLED" "/ETH_ACTLED" "/ETH_XI" "/ETH_XO" "/ETH_CS" "/ETH_SCK" "/ETH_MISO" "/ETH_MOSI" "/ETH_INT" "/ETH_RST" "/ETH_PMODE" /COMP3 /FB3 /FREQ3 /BST3 "/ETH_FREQ" /BLED1 "unconnected-(J1-Pin_1-Pad1)" "unconnected-(J1-Pin_2-Pad2)" "unconnected-(J1-Pin_3-Pad3)" "unconnected-(J1-Pin_4-Pad4)" "/BAT_SENSE" "/PWR_CTRL" "/GNSS_TX" "/GNSS_RX" "/5V_SENSE" "FAN_PWM" "unconnected-(J1-Pin_13-Pad13)" "EXT_LED" "/NTC_TEMP" "FAN_TACH" "/COMP3_C" "FAN_GATE" /IGATE "/RS485_T" "/RS485_B" "/ETH_FB" "/RS485_A" "/I2C_SDA" "/RS232_C2P" "/RS232_C2N" "/ETH_SW" "/ETH_RCT" "/MODEM_LED" "/MODEM_LED_A" "/I2C_SCL" "/DOUT_4G" "/DIN_4G" "/MODEM_RST" "/USB_VBUS" "/USB_DP" "/USB_DM" "unconnected-(J7-Pin_9-Pad9)" "/ETH_COMP" "/ETH_COMPC" "/LED_A" "/ETH_ACT_A" "USART1_RX" "COMP_FAN" "/BASE_LS" "/SER_XTAL1" "/FB_FAN" "/ETH_LNK_A" "/RGBG_K" "/RGB_G" "BST_FAN" "unconnected-(U4-ALERT-Pad3)" /BATLED3 /BLED3 "/CLPROG_TP" "unconnected-(J8-Pin_2-Pad2)" "unconnected-(J8-Pin_3-Pad3)" "unconnected-(J8-Pin_4-Pad4)" "unconnected-(J8-Pin_5-Pad5)" "unconnected-(J8-Pin_9-Pad9)" "FREQ_FAN" /BATLED4 /BLED4 "/USB_CC1" "/SER_TXB" "/SER_RXB" "/F0_SEL" "/SER_IRQ" "/LED_K" "/Q6_BASE" /BATLED2 "/USB_CC2" "unconnected-(P1-Pin_4-Pad4)" "unconnected-(P1-Pin_5-Pad5)" "/SER_XTAL2" /PFI "/SER_RXA" "/SER_DEA" "/SER_TXA" /KCOIL "/USART1_TX" "/CHRG_EN" "unconnected-(J2-Pin_8-Pad8)" "unconnected-(J2-Pin_9-Pad9)" "/CHRG_STAT" "/CHRG_FAULT" "/BYP_CTRL" "unconnected-(J2-Pin_17-Pad17)" "/RS232_VN" "/SER_RSTn" /PROG "/VFB_BST" "unconnected-(U6-RST-Pad11)" "/F2_SEL" "/F1_SEL" "/PFO_TP" "/RGBR_K" "/RGB_R" "/RS232_C1P" "/RS232_C1N" "/RGBB_K" "/RGB_B" /BATLED1 "/RS232_VP" "/ETH_BST" "/RS232_RX" "/RS232_TX" "unconnected-(MOD1-NC-Pad1)" "unconnected-(MOD1-RESET-Pad3)" "unconnected-(MOD1-3V3_OUT-Pad4)" "unconnected-(MOD1-VIN-Pad8)" "unconnected-(MOD1-A0-Pad9)" "unconnected-(MOD1-A1-Pad10)" "unconnected-(MOD1-A2-Pad11)" "unconnected-(MOD1-A3-Pad12)" "unconnected-(MOD1-A4-Pad13)" "unconnected-(MOD1-A5-Pad14)" "unconnected-(MOD1-D3-Pad18)" "unconnected-(MOD1-D4-Pad19)" "unconnected-(MOD1-D5-Pad20)" "unconnected-(MOD1-D6-Pad21)" "unconnected-(MOD1-D7-Pad22)" "unconnected-(MOD1-D9-Pad24)" "unconnected-(MOD1-D10-Pad25)" "unconnected-(MOD1-FENCE_D11-Pad26)" "unconnected-(MOD1-EXTINT_D12-Pad27)" "unconnected-(MOD1-TPS_D13-Pad28)" "unconnected-(MOD1-AREF-Pad30)" "unconnected-(MOD1-SDA-Pad31)" "unconnected-(MOD1-SCL-Pad32)" (clearance_class "kicad_default") (via_rule "kicad_default") (rule (width 200.0) ) (circuit (use_layer F.Cu In1.Cu In2.Cu B.Cu) ) ) (class "PWR_HI" /SYS5V "/BAT_PLUS" /VEH5V /MAIN5V "/VIN_SW" "/SW_BAT" (clearance_class "PWR_HI") (via_rule "PWR_HI") (rule (width 1500.0) ) (circuit (use_layer F.Cu In1.Cu In2.Cu B.Cu) ) ) (class "PWR_MID" "SW_FAN" "/5V_FAN" "/FAN_RET" "/3V3_ETH" "/SW3_NODE" "/SW_5V" "/SW_IN" "/3V3_MODEM" (clearance_class "PWR_MID") (via_rule "PWR_MID") (rule (width 1000.0) ) (circuit (use_layer F.Cu In1.Cu In2.Cu B.Cu) ) ) (class HV24 "/24V_IN" 24V "IGN_IN" "Q10_GATE" (clearance_class HV24) (via_rule HV24) (rule (width 500.0) ) (circuit (use_layer F.Cu In1.Cu In2.Cu B.Cu) ) ) )