Drogheda/03-Architecture-Hardware/kicad
Leopoldo Rodríguez 548b69f177 1.1 Phase C1: W5500 datasheet verification — 2 bugs fixed, Ethernet unblocked
Checked against WIZnet W5500 datasheet v1.1.0 (official pin table):
- CONFIRMED correct: pin 23 RSVD->GND, pin 18 VBG floating, EXRES1 12.4k/1%,
  PMODE[2:0]=111 autoneg via pins 43-45, LINKLED/ACTLED pins 25/27 active-low
  sink topology, TXN/TXP/RXN/RXP order (1/2/5/6), SPI on 32-37
- BUG FIXED: RSVD pins 38-42 were floating; datasheet requires GND. Added
  5 GND stubs on U11 in the schematic + (net GND) on board pads 38-42
- BUG FIXED: TOCAP/1V2O caps were 10uF/4.7uF; datasheet requires 4.7uF/10nF.
  C90 -> 4.7uF, C91 -> 10nF (sch + board values; footprints unchanged)
- R83 board value harmonized to sch's 12.4k/1%
Magjack HR911105A: wiring matches the standard table (TX 1/2, RX 3/6,
TCT pin4->3V3_ETH, RCT pin5->6.8nF, internal Bob Smith). Bench-check with
DMM before flash: pins 4/5 CT assignment + LED anode/cathode on 9-12.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GSKKes8GsS4YHAMWJ44tCm
2026-07-29 18:12:51 +00:00
..
_archive-2026-07-07 sync: commit before registering as submodule 2026-07-08 14:58:40 -06:00
Drogheda.pretty 1.1 Phase A: schematic blocks M/N/O (SC16IS752+RS485+RS232, W5500+MagJack+3V3_ETH buck, PCF8574+RGB), gauge->expander frees SPI2, depop P3/P13/H3 2026-07-29 02:17:05 +00:00
logs auto-sync 2026-07-25 18:00 2026-07-25 18:00:14 -06:00
production sync: commit before registering as submodule 2026-07-08 14:58:40 -06:00
Drogheda-sym.kicad_sym 2026-07-02: PROD schematic complete (ERC 0) + carrier-board PCB + doc sweep to the Jul-2 ledger 2026-07-02 22:18:56 -06:00
fabrication-toolkit-options.json auto-sync 2026-07-06 18:00 2026-07-06 18:00:09 -06:00
fp-lib-table 1.1 Phase A: schematic blocks M/N/O (SC16IS752+RS485+RS232, W5500+MagJack+3V3_ETH buck, PCF8574+RGB), gauge->expander frees SPI2, depop P3/P13/H3 2026-07-29 02:17:05 +00:00
HBOX-v3-PROD.step auto-sync 2026-07-07 18:00 2026-07-07 18:00:12 -06:00
hbox-watchdog-v3-PROD.kicad_dru auto-sync 2026-07-06 18:00 2026-07-06 18:00:09 -06:00
hbox-watchdog-v3-PROD.kicad_pcb HBOX v4: project renamed hbox-watchdog-v4 (199 sch + 113 pcb refs); v3-PROD files restored to as-fabricated as the frozen EinarBoard 1.0 record; ERC endpoint_off_grid muted on v4 2026-07-29 03:34:46 +00:00
hbox-watchdog-v3-PROD.kicad_pro HBOX v4: project renamed hbox-watchdog-v4 (199 sch + 113 pcb refs); v3-PROD files restored to as-fabricated as the frozen EinarBoard 1.0 record; ERC endpoint_off_grid muted on v4 2026-07-29 03:34:46 +00:00
hbox-watchdog-v3-PROD.kicad_sch HBOX v4: project renamed hbox-watchdog-v4 (199 sch + 113 pcb refs); v3-PROD files restored to as-fabricated as the frozen EinarBoard 1.0 record; ERC endpoint_off_grid muted on v4 2026-07-29 03:34:46 +00:00
hbox-watchdog-v3.kicad_pcb add objectivity rule across all projects 2026-06-24 00:44:04 -06:00
hbox-watchdog-v3.kicad_prl add objectivity rule across all projects 2026-06-24 00:44:04 -06:00
hbox-watchdog-v3.kicad_pro auto-sync 2026-06-24 18:00 2026-06-24 18:00:06 -06:00
hbox-watchdog-v3.kicad_sch auto-sync 2026-07-06 18:00 2026-07-06 18:00:09 -06:00
hbox-watchdog-v4.kicad_dru HBOX v4: project renamed hbox-watchdog-v4 (199 sch + 113 pcb refs); v3-PROD files restored to as-fabricated as the frozen EinarBoard 1.0 record; ERC endpoint_off_grid muted on v4 2026-07-29 03:34:46 +00:00
hbox-watchdog-v4.kicad_pcb 1.1 Phase C1: W5500 datasheet verification — 2 bugs fixed, Ethernet unblocked 2026-07-29 18:12:51 +00:00
hbox-watchdog-v4.kicad_pro 1.1 Phase B6: manual placement pass (Leo) — board arranged in KiCad 2026-07-29 18:01:12 +00:00
hbox-watchdog-v4.kicad_sch 1.1 Phase C1: W5500 datasheet verification — 2 bugs fixed, Ethernet unblocked 2026-07-29 18:12:51 +00:00
sym-lib-table 2026-07-02: PROD schematic complete (ERC 0) + carrier-board PCB + doc sweep to the Jul-2 ledger 2026-07-02 22:18:56 -06:00