Helgen-Services/Drogheda
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
addebea5bb
Drogheda/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD-drc-baseline.txt
Leopoldo Rodríguez 2c3dffa232 2026-07-02: PROD schematic complete (ERC 0) + carrier-board PCB + doc sweep to the Jul-2 ledger 
Electrical/PCB:
- LTC4040 Block B sized to the 12 Ah 1S4P pack (RPROG 825R -> 2.42 A ~ C/5,
  RS 8 mR -> 3.1 A input limit, PFI 4.60 V, backup 4.79 V, charge 4.00 V Li-ion
  via VSYS-referenced straps) + Block E cutoff (P11) + Block F PA4->VEH5V re-tap
  + Block H fail-safe Modo-B bypass (K1 normally-closed relay) + Block I NTC->PB1.
- CARRIER-BOARD conversion: simpleRTK2B Pro on UNO-pattern female headers (MOD1;
  D0/D1=UART1, D2=RX2, D8=TX2, IOREF=3V3, 5V=SW_5V) + 4G NTRIP Master on on-board
  XBee socket (J7/J8; VCC=3V3_MODEM via new Block K MP1584 buck off SW_5V - the
  HP XBee socket is 3.3 V not 5 V). Board 120x100, placement + GND pour + DRC
  baselines. Custom symbols: LTC4040EUFD, AO4406A, SimpleRTK2B_Pro_Socket.
- Fixed duplicated U2, stale no-connects, A4->A3 sheet; ERC 0 errors.

Docs:
- Canonical electrical-design-state + production delta (Block B values table,
  5b/5c/5d/5e) + design/rationale/connections/BOM swept to the Jul-2 assumptions
  ledger (Conexiones-por-Bloque xlsx).
- Guia de Conexion Protoboard: LaTeX source now maintained in-repo -> v2.1 PDF.
- CircuiTikZ sheet + wiring Beamer: block 11 (NTC->PB1) + guinda ignition legend.
- Client decks: Avance v1.1 (overclaims fixed) + RCA v1.1 (2-jul addendum).

Repo hygiene:
- .gitignore: live rtk-config (SIM/APN/NTRIP creds) now ignored and REMOVED from
  tracking (NOTE: rotate those credentials - they exist in prior commits);
  KiCad .bak/snapshots/.history, LaTeX intermediates, Office locks ignored+purged.
- Removed rogue .history gitlinks that broke git status.
2026-07-02 22:18:56 -06:00

1835 lines
90 KiB
Plaintext
Raw Blame History

** Drc report for hbox-watchdog-v3-PROD.kicad_pcb **
** Created on 2026-07-02T17:32:40 **
** Report includes: Errors, Warnings **
** Found 242 DRC violations **
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0000 mm)
Local override; error
@(16.0000 mm, 52.0000 mm): Pad 2 [FAN_RET] of D2 on F.Cu
@(17.0625 mm, 53.0500 mm): Pad 1 [<no net>] of Q2 on F.Cu
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0000 mm)
Local override; error
@(73.0625 mm, 14.9500 mm): Pad 2 [<no net>] of Q1 on F.Cu
@(75.3000 mm, 16.0000 mm): Pad 1 [SW_5V] of C3 on F.Cu
[shorting_items]: Items shorting two nets (nets SW_BAT and GND)
Local override; error
@(90.1000 mm, 22.0000 mm): Pad 1 [SW_BAT] of L6 on F.Cu
@(88.0000 mm, 24.0000 mm): Pad 25 [GND] of U6 on F.Cu
[shorting_items]: Items shorting two nets (nets SW_BAT and PFO_TP)
Local override; error
@(90.1000 mm, 22.0000 mm): Pad 1 [SW_BAT] of L6 on F.Cu
@(89.0000 mm, 21.5500 mm): Pad 20 [PFO_TP] of U6 on F.Cu
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0050 mm)
Local override; error
@(29.1000 mm, 12.0000 mm): Pad 1 [SW_FAN] of L2 on F.Cu
@(28.4750 mm, 13.9050 mm): Pad 5 [GND] of U2 on F.Cu
[shorting_items]: Items shorting two nets (nets SW_FAN and FREQ_FAN)
Local override; error
@(29.1000 mm, 12.0000 mm): Pad 1 [SW_FAN] of L2 on F.Cu
@(28.4750 mm, 12.6350 mm): Pad 6 [FREQ_FAN] of U2 on F.Cu
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
Local override; error
@(53.2875 mm, 73.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
@(53.2875 mm, 74.0000 mm): Pad 2 [GND] of U4 on F.Cu
[shorting_items]: Items shorting two nets (nets SW_FAN and 24V)
Local override; error
@(29.1000 mm, 12.0000 mm): Pad 1 [SW_FAN] of L2 on F.Cu
@(28.4750 mm, 11.3650 mm): Pad 7 [24V] of U2 on F.Cu
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0050 mm)
Local override; error
@(29.1000 mm, 12.0000 mm): Pad 1 [SW_FAN] of L2 on F.Cu
@(28.4750 mm, 10.0950 mm): Pad 8 [BST_FAN] of U2 on F.Cu
[shorting_items]: Items shorting two nets (nets SW_BAT and PFI)
Local override; error
@(90.1000 mm, 22.0000 mm): Pad 1 [SW_BAT] of L6 on F.Cu
@(89.9500 mm, 22.5000 mm): Pad 19 [PFI] of U6 on F.Cu
[shorting_items]: Items shorting two nets (nets I2C_SCL and BLED4)
Local override; error
@(36.5000 mm, 77.0000 mm): PTH pad 4 [I2C_SCL] of P5
@(36.9375 mm, 76.0000 mm): Pad 2 [BLED4] of DB4 on F.Cu
[shorting_items]: Items shorting two nets (nets SW_BAT and NTC)
Local override; error
@(90.1000 mm, 22.0000 mm): Pad 1 [SW_BAT] of L6 on F.Cu
@(89.9500 mm, 23.5000 mm): Pad 17 [NTC] of U6 on F.Cu
[shorting_items]: Items shorting two nets (nets SW_BAT and VFB_BST)
Local override; error
@(90.1000 mm, 22.0000 mm): Pad 1 [SW_BAT] of L6 on F.Cu
@(89.9500 mm, 23.0000 mm): Pad 18 [VFB_BST] of U6 on F.Cu
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1713 mm)
Local override; error
@(36.5000 mm, 77.0000 mm): PTH pad 4 [I2C_SCL] of P5
@(35.0625 mm, 76.0000 mm): Pad 1 [GND] of DB4 on F.Cu
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
Local override; error
@(53.2875 mm, 74.0000 mm): Pad 2 [GND] of U4 on F.Cu
@(53.2875 mm, 74.5000 mm): Pad 3 [<no net>] of U4 on F.Cu
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0000 mm)
Local override; error
@(83.6200 mm, 76.7000 mm): PTH pad 7 [<no net>] of K1
@(83.5000 mm, 76.0000 mm): PTH pad 2 [GND] of P3
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0000 mm)
Local override; error
@(83.6200 mm, 76.7000 mm): PTH pad 7 [<no net>] of K1
@(83.5000 mm, 76.0000 mm): PTH pad 2 [GND] of P3
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
Local override; error
@(54.7125 mm, 74.5000 mm): Pad 4 [GND] of U4 on F.Cu
@(54.7125 mm, 74.0000 mm): Pad 5 [3V3] of U4 on F.Cu
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.1500 mm)
Local override; error
@(54.7125 mm, 74.0000 mm): Pad 5 [3V3] of U4 on F.Cu
@(54.7125 mm, 73.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
[shorting_items]: Items shorting two nets (nets VEH5V and GND)
Local override; error
@(81.0500 mm, 16.0000 mm): Pad 1 [VEH5V] of C30 on F.Cu
@(80.7000 mm, 16.0000 mm): Pad 2 [GND] of C3 on F.Cu
[shorting_items]: Items shorting two nets (nets MAIN5V and VFB_BST)
Local override; error
@(-0.8250 mm, 0.0000 mm): Pad 1 [MAIN5V] of R53 on F.Cu
@(-0.8250 mm, 0.0000 mm): Pad 1 [VFB_BST] of R54 on F.Cu
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0000 mm)
Local override; error
@(23.0625 mm, 27.0500 mm): Pad 1 [24V] of DzG on F.Cu
@(19.2600 mm, 28.0000 mm): Pad 2 [<no net>] of Q10 on F.Cu
[shorting_items]: Items shorting two nets (nets VFB_BST and GND)
Local override; error
@(0.8250 mm, 0.0000 mm): Pad 2 [VFB_BST] of R53 on F.Cu
@(0.8250 mm, 0.0000 mm): Pad 2 [GND] of R54 on F.Cu
[clearance]: Clearance violation ( clearance 0.2000 mm; actual 0.0000 mm)
Local override; error
@(23.0625 mm, 28.9500 mm): Pad 2 [Q10_GATE] of DzG on F.Cu
@(19.2600 mm, 28.0000 mm): Pad 2 [<no net>] of Q10 on F.Cu
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(95.0000 mm, 62.0000 mm): Footprint P13
@(95.0000 mm, 52.0000 mm): Footprint P12
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(26.0000 mm, 18.0000 mm): Footprint Dbk
@(33.0000 mm, 12.0000 mm): Footprint L2
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(8.0000 mm, 56.0000 mm): Footprint P6
@(14.0000 mm, 52.0000 mm): Footprint D2
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(94.0000 mm, 36.0000 mm): Footprint P4
@(94.0000 mm, 29.0000 mm): Footprint C35
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(94.0000 mm, 36.0000 mm): Footprint P4
@(90.0000 mm, 32.0000 mm): Footprint C32
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(94.0000 mm, 36.0000 mm): Footprint P4
@(90.0000 mm, 36.0000 mm): Footprint C33
[npth_inside_courtyard]: NPTH inside courtyard
Local override; error
@(5.0000 mm, 75.0000 mm): NPTH pad of MH3
@(8.0000 mm, 74.0000 mm): Footprint P10
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(8.0000 mm, 74.0000 mm): Footprint P10
@(8.0000 mm, 66.0000 mm): Footprint P8
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(24.0000 mm, 24.0000 mm): Footprint Ccomp
@(18.0000 mm, 28.0000 mm): Footprint Q10
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(52.0000 mm, 8.0000 mm): Footprint P11
@(44.0000 mm, 8.0000 mm): Footprint P2
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(74.0000 mm, 14.0000 mm): Footprint Q1
@(78.0000 mm, 16.0000 mm): Footprint C3
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(48.0000 mm, 74.0000 mm): Footprint U3
@(44.0000 mm, 77.0000 mm): Footprint P5
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(14.0000 mm, 52.0000 mm): Footprint D2
@(18.0000 mm, 54.0000 mm): Footprint Q2
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(14.0000 mm, 36.0000 mm): Footprint D10
@(8.0000 mm, 38.0000 mm): Footprint P1
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(14.0000 mm, 36.0000 mm): Footprint D10
@(18.0000 mm, 34.0000 mm): Footprint Rrp
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(20.0000 mm, 24.0000 mm): Footprint Rcomp
@(18.0000 mm, 28.0000 mm): Footprint Q10
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(94.0000 mm, 22.0000 mm): Footprint L6
@(88.0000 mm, 24.0000 mm): Footprint U6
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(33.0000 mm, 12.0000 mm): Footprint L2
@(26.0000 mm, 12.0000 mm): Footprint U2
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(33.0000 mm, 12.0000 mm): Footprint L2
@(31.0000 mm, 8.0000 mm): Footprint JP1
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(74.0000 mm, 18.0000 mm): Footprint R1
@(78.0000 mm, 16.0000 mm): Footprint C3
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(44.0000 mm, 77.0000 mm): Footprint P5
@(32.0000 mm, 76.0000 mm): Footprint DB3
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(44.0000 mm, 77.0000 mm): Footprint P5
@(36.0000 mm, 76.0000 mm): Footprint DB4
[pth_inside_courtyard]: PTH inside courtyard
Local override; error
@(36.5000 mm, 77.0000 mm): PTH pad 4 [I2C_SCL] of P5
@(36.0000 mm, 76.0000 mm): Footprint DB4
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(90.0000 mm, 44.0000 mm): Footprint JP4
@(86.0000 mm, 44.0000 mm): Footprint JP3
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(76.0000 mm, 64.0000 mm): Footprint K1
@(86.0000 mm, 76.0000 mm): Footprint P3
[pth_inside_courtyard]: PTH inside courtyard
Local override; error
@(83.5000 mm, 76.0000 mm): PTH pad 2 [GND] of P3
@(76.0000 mm, 64.0000 mm): Footprint K1
[pth_inside_courtyard]: PTH inside courtyard
Local override; error
@(81.0000 mm, 76.0000 mm): PTH pad 3 [GNSS_TX] of P3
@(76.0000 mm, 64.0000 mm): Footprint K1
[pth_inside_courtyard]: PTH inside courtyard
Local override; error
@(78.5000 mm, 76.0000 mm): PTH pad 4 [GNSS_RX] of P3
@(76.0000 mm, 64.0000 mm): Footprint K1
[pth_inside_courtyard]: PTH inside courtyard
Local override; error
@(76.0000 mm, 76.7000 mm): PTH pad 6 [<no net>] of K1
@(86.0000 mm, 76.0000 mm): Footprint P3
[pth_inside_courtyard]: PTH inside courtyard
Local override; error
@(83.6200 mm, 76.7000 mm): PTH pad 7 [<no net>] of K1
@(86.0000 mm, 76.0000 mm): Footprint P3
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(76.0000 mm, 64.0000 mm): Footprint K1
@(84.0000 mm, 68.0000 mm): Footprint D6
[pth_inside_courtyard]: PTH inside courtyard
Local override; error
@(83.6200 mm, 69.0800 mm): PTH pad 10 [<no net>] of K1
@(84.0000 mm, 68.0000 mm): Footprint D6
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(8.0000 mm, 38.0000 mm): Footprint P1
@(18.0000 mm, 28.0000 mm): Footprint Q10
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(62.8600 mm, 16.0000 mm): Footprint J2
@(64.0000 mm, 66.0000 mm): Footprint R40
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(24.0000 mm, 28.0000 mm): Footprint DzG
@(18.0000 mm, 28.0000 mm): Footprint Q10
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(86.0000 mm, 44.0000 mm): Footprint JP3
@(82.0000 mm, 44.0000 mm): Footprint JP2
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(0.0000 mm, 0.0000 mm): Footprint R53
@(0.0000 mm, 0.0000 mm): Footprint R54
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(82.0000 mm, 20.0000 mm): Footprint C31
@(78.0000 mm, 16.0000 mm): Footprint C3
[courtyards_overlap]: Courtyards overlap
Rule: board setup constraints courtyard; error
@(82.0000 mm, 16.0000 mm): Footprint C30
@(78.0000 mm, 16.0000 mm): Footprint C3
[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.2300 mm)
Rule: board setup constraints edge; error
@(100.0000 mm, 80.0000 mm): Segment on Edge.Cuts
@(70.0000 mm, 81.0800 mm): PTH pad 3 [GND] of H3
[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.4250 mm)
Rule: board setup constraints edge; error
@(0.0000 mm, 0.0000 mm): Segment on Edge.Cuts
@(-0.8250 mm, 0.0000 mm): Pad 1 [MAIN5V] of R53 on F.Cu
[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.0000 mm)
Rule: board setup constraints edge; error
@(0.0000 mm, 0.0000 mm): Segment on Edge.Cuts
@(0.8250 mm, 0.0000 mm): Pad 2 [VFB_BST] of R53 on F.Cu
[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.0000 mm)
Rule: board setup constraints edge; error
@(100.0000 mm, 80.0000 mm): Segment on Edge.Cuts
@(14.0000 mm, 80.5000 mm): PTH pad 2 [GND] of SW1
[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.0000 mm)
Rule: board setup constraints edge; error
@(100.0000 mm, 80.0000 mm): Segment on Edge.Cuts
@(20.5000 mm, 80.5000 mm): PTH pad 2 [GND] of SW1
[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.4250 mm)
Rule: board setup constraints edge; error
@(0.0000 mm, 0.0000 mm): Segment on Edge.Cuts
@(-0.8250 mm, 0.0000 mm): Pad 1 [VFB_BST] of R54 on F.Cu
[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.5000 mm; actual 0.0000 mm)
Rule: board setup constraints edge; error
@(0.0000 mm, 0.0000 mm): Segment on Edge.Cuts
@(0.8250 mm, 0.0000 mm): Pad 2 [GND] of R54 on F.Cu
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(81.0500 mm, 16.0000 mm): Pad 1 [VEH5V] of C30 on F.Cu
@(80.7000 mm, 16.0000 mm): Pad 2 [GND] of C3 on F.Cu
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(73.0625 mm, 14.9500 mm): Pad 2 [<no net>] of Q1 on F.Cu
@(75.3000 mm, 16.0000 mm): Pad 1 [SW_5V] of C3 on F.Cu
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(17.0625 mm, 53.0500 mm): Pad 1 [<no net>] of Q2 on F.Cu
@(16.0000 mm, 52.0000 mm): Pad 2 [FAN_RET] of D2 on F.Cu
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(23.0625 mm, 27.0500 mm): Pad 1 [24V] of DzG on F.Cu
@(19.2600 mm, 28.0000 mm): Pad 2 [<no net>] of Q10 on F.Cu
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(89.9500 mm, 23.5000 mm): Pad 17 [NTC] of U6 on F.Cu
@(90.1000 mm, 22.0000 mm): Pad 1 [SW_BAT] of L6 on F.Cu
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(23.0625 mm, 28.9500 mm): Pad 2 [Q10_GATE] of DzG on F.Cu
@(19.2600 mm, 28.0000 mm): Pad 2 [<no net>] of Q10 on F.Cu
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(89.9500 mm, 22.5000 mm): Pad 19 [PFI] of U6 on F.Cu
@(90.1000 mm, 22.0000 mm): Pad 1 [SW_BAT] of L6 on F.Cu
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(-0.8250 mm, 0.0000 mm): Pad 1 [VFB_BST] of R54 on F.Cu
@(-0.8250 mm, 0.0000 mm): Pad 1 [MAIN5V] of R53 on F.Cu
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(28.4750 mm, 12.6350 mm): Pad 6 [FREQ_FAN] of U2 on F.Cu
@(29.1000 mm, 12.0000 mm): Pad 1 [SW_FAN] of L2 on F.Cu
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(89.0000 mm, 21.5500 mm): Pad 20 [PFO_TP] of U6 on F.Cu
@(90.1000 mm, 22.0000 mm): Pad 1 [SW_BAT] of L6 on F.Cu
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(0.8250 mm, 0.0000 mm): Pad 2 [GND] of R54 on F.Cu
@(0.8250 mm, 0.0000 mm): Pad 2 [VFB_BST] of R53 on F.Cu
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(36.9375 mm, 76.0000 mm): Pad 2 [BLED4] of DB4 on F.Cu
@(36.5000 mm, 77.0000 mm): PTH pad 4 [I2C_SCL] of P5
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(83.5000 mm, 76.0000 mm): PTH pad 2 [GND] of P3
@(83.6200 mm, 76.7000 mm): PTH pad 7 [<no net>] of K1
[solder_mask_bridge]: Rear solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(83.6200 mm, 76.7000 mm): PTH pad 7 [<no net>] of K1
@(83.5000 mm, 76.0000 mm): PTH pad 2 [GND] of P3
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(28.4750 mm, 11.3650 mm): Pad 7 [24V] of U2 on F.Cu
@(29.1000 mm, 12.0000 mm): Pad 1 [SW_FAN] of L2 on F.Cu
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(90.1000 mm, 22.0000 mm): Pad 1 [SW_BAT] of L6 on F.Cu
@(89.9500 mm, 23.0000 mm): Pad 18 [VFB_BST] of U6 on F.Cu
[solder_mask_bridge]: Front solder mask aperture bridges items with different nets
Rule: board setup solder mask min width; error
@(88.0000 mm, 24.0000 mm): Pad 25 [GND] of U6 on F.Cu
@(90.1000 mm, 22.0000 mm): Pad 1 [SW_BAT] of L6 on F.Cu
[silk_edge_clearance]: Silkscreen clipped by board edge
Rule: board setup constraints silk; warning
@(100.0000 mm, 80.0000 mm): Segment on Edge.Cuts
@(68.6200 mm, 77.2700 mm): Segment of H3 on F.Silkscreen
[silk_edge_clearance]: Silkscreen clipped by board edge
Rule: board setup constraints silk; warning
@(100.0000 mm, 80.0000 mm): Segment on Edge.Cuts
@(71.3800 mm, 77.2700 mm): Segment of H3 on F.Silkscreen
[silk_edge_clearance]: Silkscreen clipped by board edge
Rule: board setup constraints silk; warning
@(100.0000 mm, 80.0000 mm): Segment on Edge.Cuts
@(40.2500 mm, 80.5500 mm): Reference field of P5
[silk_edge_clearance]: Silkscreen clipped by board edge
Rule: board setup constraints silk; warning
@(0.0000 mm, 80.0000 mm): Segment on Edge.Cuts
@(-0.2373 mm, 0.5225 mm): Segment of R53 on F.Silkscreen
[silk_edge_clearance]: Silkscreen clipped by board edge
Rule: board setup constraints silk; warning
@(100.0000 mm, 80.0000 mm): Segment on Edge.Cuts
@(82.2500 mm, 79.5500 mm): Reference field of P3
[silk_edge_clearance]: Silkscreen clipped by board edge
Rule: board setup constraints silk; warning
@(0.0000 mm, 80.0000 mm): Segment on Edge.Cuts
@(-0.2373 mm, 0.5225 mm): Segment of R54 on F.Silkscreen
[hole_to_hole]: Drilled hole too close to other hole (board setup constraints min 0.2495 mm; actual 0.0000 mm)
Rule: board setup constraints; warning
@(83.6200 mm, 76.7000 mm): PTH pad 7 [<no net>] of K1
@(83.5000 mm, 76.0000 mm): PTH pad 2 [GND] of P3
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
Local override; warning
@(5.0000 mm, 75.0000 mm): Footprint MH3
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
Local override; warning
@(95.0000 mm, 75.0000 mm): Footprint MH4
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
Local override; warning
@(95.0000 mm, 5.0000 mm): Footprint MH2
[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole'
Local override; warning
@(5.0000 mm, 5.0000 mm): Footprint MH1
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(82.0000 mm, 14.3200 mm): Reference field of C30
@(81.4100 mm, 12.5900 mm): Segment of C3 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(74.5900 mm, 13.6544 mm): Segment of C3 on F.Silkscreen
@(74.7600 mm, 12.4400 mm): Segment of Q1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(49.1500 mm, 5.2500 mm): Segment of P11 on F.Silkscreen
@(41.4400 mm, 5.5400 mm): Rectangle of P2 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(49.1500 mm, 5.2500 mm): Segment of P11 on F.Silkscreen
@(47.2500 mm, 5.5500 mm): Rectangle of P2 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(74.5900 mm, 18.3456 mm): Segment of C3 on F.Silkscreen
@(74.0000 mm, 16.5700 mm): Reference field of R1
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(90.0000 mm, 33.7000 mm): Reference field of C33
@(90.4500 mm, 33.5000 mm): Reference field of P4
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(89.2887 mm, 33.3600 mm): Segment of C32 on F.Silkscreen
@(90.4500 mm, 33.5000 mm): Reference field of P4
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(90.0000 mm, 33.7000 mm): Reference field of C33
@(89.2887 mm, 33.3600 mm): Segment of C32 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(94.0000 mm, 27.3200 mm): Reference field of C35
@(94.0000 mm, 27.2000 mm): Reference field of L6
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(82.0000 mm, 18.5700 mm): Reference field of C31
@(81.4100 mm, 19.4100 mm): Segment of C3 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(35.0500 mm, 16.1500 mm): Segment of L2 on F.Silkscreen
@(31.0000 mm, 16.5700 mm): Reference field of Cbst
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(31.0000 mm, 16.5700 mm): Reference field of Cbst
@(33.0000 mm, 17.2000 mm): Reference field of L2
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(19.7627 mm, 24.5225 mm): Segment of Rcomp on F.Silkscreen
@(21.1100 mm, 24.5500 mm): Segment of Q10 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(14.0000 mm, 33.0000 mm): Reference field of D10
@(12.7200 mm, 15.3800 mm): Segment of P1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(10.3400 mm, 33.8500 mm): Segment of D10 on F.Silkscreen
@(12.7200 mm, 15.3800 mm): Segment of P1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(10.3400 mm, 33.8500 mm): Segment of D10 on F.Silkscreen
@(10.6000 mm, 40.6200 mm): Segment of P1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(12.1000 mm, 40.6200 mm): Segment of P1 on F.Silkscreen
@(10.3400 mm, 33.8500 mm): Segment of D10 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(10.3400 mm, 38.1500 mm): Segment of D10 on F.Silkscreen
@(12.7200 mm, 38.0000 mm): Polygon of P1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(10.3400 mm, 38.1500 mm): Segment of D10 on F.Silkscreen
@(10.6000 mm, 40.6200 mm): Segment of P1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(12.1000 mm, 40.6200 mm): Segment of P1 on F.Silkscreen
@(10.3400 mm, 38.1500 mm): Segment of D10 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(12.7200 mm, 15.3800 mm): Segment of P1 on F.Silkscreen
@(12.9600 mm, 24.8600 mm): Polygon of Q10 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(20.0000 mm, 22.5700 mm): Reference field of Rcomp
@(24.0000 mm, 22.5700 mm): Reference field of Ccomp
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(20.0000 mm, 22.5700 mm): Reference field of Rcomp
@(18.0000 mm, 23.5000 mm): Reference field of Q10
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(28.0000 mm, 22.5700 mm): Reference field of Rfreq
@(24.0000 mm, 22.5700 mm): Reference field of Ccomp
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(-0.2373 mm, 0.5225 mm): Segment of R54 on F.Silkscreen
@(-0.2373 mm, 0.5225 mm): Segment of R53 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(5.5400 mm, 76.5600 mm): Rectangle of P10 on F.Silkscreen
@(5.0000 mm, 75.0000 mm): Reference field of MH3
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(5.2500 mm, 68.8500 mm): Segment of P8 on F.Silkscreen
@(5.5400 mm, 76.5600 mm): Rectangle of P10 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(5.5500 mm, 76.5500 mm): Rectangle of P10 on F.Silkscreen
@(5.0000 mm, 75.0000 mm): Reference field of MH3
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(5.2500 mm, 68.8500 mm): Segment of P8 on F.Silkscreen
@(5.5500 mm, 70.7500 mm): Rectangle of P10 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(5.5400 mm, 58.5600 mm): Rectangle of P6 on F.Silkscreen
@(10.4900 mm, 50.3500 mm): Segment of D2 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(5.5400 mm, 58.5600 mm): Rectangle of P6 on F.Silkscreen
@(10.4900 mm, 53.6500 mm): Segment of D2 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(10.7500 mm, 46.7000 mm): Segment of P6 on F.Silkscreen
@(10.4900 mm, 50.3500 mm): Segment of D2 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(10.7500 mm, 57.8000 mm): Segment of P6 on F.Silkscreen
@(10.4900 mm, 53.6500 mm): Segment of D2 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(34.7000 mm, 74.2500 mm): Segment of P5 on F.Silkscreen
@(36.0000 mm, 74.3500 mm): Reference field of DB4
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(46.5600 mm, 79.4600 mm): Rectangle of P5 on F.Silkscreen
@(46.8000 mm, 73.4000 mm): Polygon of U3 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(34.7000 mm, 77.2000 mm): Segment of P5 on F.Silkscreen
@(36.0000 mm, 74.3500 mm): Reference field of DB4
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(34.3150 mm, 76.9600 mm): Segment of DB4 on F.Silkscreen
@(34.7000 mm, 77.2000 mm): Segment of P5 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(34.7000 mm, 77.2000 mm): Segment of P5 on F.Silkscreen
@(37.0000 mm, 75.0400 mm): Segment of DB4 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(21.7627 mm, 57.4775 mm): Segment of Rgs on F.Silkscreen
@(22.0000 mm, 56.5700 mm): Reference field of Rgs
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(92.5400 mm, 64.5600 mm): Rectangle of P13 on F.Silkscreen
@(92.5400 mm, 54.5600 mm): Rectangle of P12 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(92.5400 mm, 64.5600 mm): Rectangle of P13 on F.Silkscreen
@(94.8000 mm, 54.5500 mm): Segment of P12 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(92.5400 mm, 64.5600 mm): Rectangle of P13 on F.Silkscreen
@(92.5500 mm, 54.5500 mm): Rectangle of P12 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(92.5400 mm, 64.5600 mm): Rectangle of P13 on F.Silkscreen
@(92.2500 mm, 54.8500 mm): Segment of P12 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(92.5400 mm, 54.5600 mm): Rectangle of P12 on F.Silkscreen
@(94.8000 mm, 54.4500 mm): Segment of P13 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(92.5500 mm, 56.2500 mm): Rectangle of P13 on F.Silkscreen
@(92.5400 mm, 54.5600 mm): Rectangle of P12 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(94.8000 mm, 54.5500 mm): Segment of P12 on F.Silkscreen
@(94.8000 mm, 54.4500 mm): Segment of P13 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(92.5500 mm, 56.2500 mm): Rectangle of P13 on F.Silkscreen
@(92.2500 mm, 54.8500 mm): Segment of P12 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(92.5500 mm, 56.2500 mm): Rectangle of P13 on F.Silkscreen
@(92.5500 mm, 54.5500 mm): Rectangle of P12 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(91.4500 mm, 50.7500 mm): Reference field of P12
@(90.0000 mm, 50.5700 mm): Reference field of C24
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(87.9500 mm, 44.3000 mm): Segment of JP4 on F.Silkscreen
@(88.0500 mm, 43.7000 mm): Segment of JP3 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(87.9500 mm, 44.3000 mm): Segment of JP4 on F.Silkscreen
@(87.3500 mm, 43.7000 mm): Arc of JP3 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(87.3500 mm, 44.3000 mm): Arc of JP3 on F.Silkscreen
@(87.9500 mm, 44.3000 mm): Segment of JP4 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(88.0500 mm, 43.7000 mm): Segment of JP3 on F.Silkscreen
@(88.6500 mm, 43.7000 mm): Arc of JP4 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(88.6500 mm, 43.7000 mm): Arc of JP4 on F.Silkscreen
@(87.3500 mm, 43.7000 mm): Arc of JP3 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(88.6500 mm, 44.3000 mm): Arc of JP4 on F.Silkscreen
@(88.0500 mm, 43.7000 mm): Segment of JP3 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(87.3500 mm, 44.3000 mm): Arc of JP3 on F.Silkscreen
@(88.6500 mm, 44.3000 mm): Arc of JP4 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(83.9500 mm, 44.3000 mm): Segment of JP3 on F.Silkscreen
@(84.0500 mm, 43.7000 mm): Segment of JP2 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(83.3500 mm, 43.7000 mm): Arc of JP2 on F.Silkscreen
@(83.9500 mm, 44.3000 mm): Segment of JP3 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(83.9500 mm, 44.3000 mm): Segment of JP3 on F.Silkscreen
@(83.3500 mm, 44.3000 mm): Arc of JP2 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(84.6500 mm, 43.7000 mm): Arc of JP3 on F.Silkscreen
@(84.0500 mm, 43.7000 mm): Segment of JP2 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(83.3500 mm, 43.7000 mm): Arc of JP2 on F.Silkscreen
@(84.6500 mm, 43.7000 mm): Arc of JP3 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(84.6500 mm, 44.3000 mm): Arc of JP3 on F.Silkscreen
@(84.0500 mm, 43.7000 mm): Segment of JP2 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(84.6500 mm, 44.3000 mm): Arc of JP3 on F.Silkscreen
@(83.3500 mm, 44.3000 mm): Arc of JP2 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(30.9500 mm, 7.8500 mm): Segment of L2 on F.Silkscreen
@(32.4000 mm, 7.7000 mm): Segment of JP1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(84.0000 mm, 66.0000 mm): Reference field of D6
@(84.9000 mm, 62.2000 mm): Segment of K1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(88.5600 mm, 78.4600 mm): Rectangle of P3 on F.Silkscreen
@(77.6510 mm, 71.8740 mm): Segment of K1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(76.7000 mm, 73.2500 mm): Segment of P3 on F.Silkscreen
@(77.6510 mm, 71.8740 mm): Segment of K1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(77.7500 mm, 78.4500 mm): Rectangle of P3 on F.Silkscreen
@(84.9000 mm, 78.3000 mm): Segment of K1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(85.2500 mm, 78.4500 mm): Rectangle of P3 on F.Silkscreen
@(84.9000 mm, 78.3000 mm): Segment of K1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(85.2500 mm, 78.4500 mm): Rectangle of P3 on F.Silkscreen
@(84.9000 mm, 62.2000 mm): Segment of K1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(87.8000 mm, 73.2500 mm): Segment of P3 on F.Silkscreen
@(84.9000 mm, 62.2000 mm): Segment of K1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(88.5600 mm, 78.4600 mm): Rectangle of P3 on F.Silkscreen
@(84.9000 mm, 78.3000 mm): Segment of K1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(88.5600 mm, 78.4600 mm): Rectangle of P3 on F.Silkscreen
@(84.9000 mm, 62.2000 mm): Segment of K1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(81.6400 mm, 67.0000 mm): Segment of D6 on F.Silkscreen
@(84.9000 mm, 62.2000 mm): Segment of K1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(81.6400 mm, 69.0000 mm): Segment of D6 on F.Silkscreen
@(84.9000 mm, 62.2000 mm): Segment of K1 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(64.0000 mm, 64.5700 mm): Reference field of R40
@(64.1900 mm, 17.2700 mm): Segment of J2 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(61.5300 mm, 65.5900 mm): Segment of J2 on F.Silkscreen
@(63.7627 mm, 65.4775 mm): Segment of R40 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(64.1900 mm, 17.2700 mm): Segment of J2 on F.Silkscreen
@(63.7627 mm, 65.4775 mm): Segment of R40 on F.Silkscreen
[silk_overlap]: Silkscreen clearance
Rule: board setup constraints silk; warning
@(54.0000 mm, 72.3500 mm): Reference field of U4
@(53.2800 mm, 73.0600 mm): Polygon of U4 on F.Silkscreen
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(95.0000 mm, 5.0000 mm): Reference field of MH2
@(95.0000 mm, 5.0000 mm): NPTH pad of MH2
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(81.7387 mm, 15.2650 mm): Segment of C30 on F.Silkscreen
@(80.7000 mm, 16.0000 mm): Pad 2 [GND] of C3 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(74.5900 mm, 13.6544 mm): Segment of C3 on F.Silkscreen
@(74.9375 mm, 14.0000 mm): Pad 3 [<no net>] of Q1 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(74.7600 mm, 14.5600 mm): Segment of Q1 on F.Silkscreen
@(75.3000 mm, 16.0000 mm): Pad 1 [SW_5V] of C3 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(73.5625 mm, 14.1525 mm): Segment of C3 on F.Silkscreen
@(74.9375 mm, 14.0000 mm): Pad 3 [<no net>] of Q1 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(74.5900 mm, 13.6544 mm): Segment of C3 on F.Silkscreen
@(74.9375 mm, 14.0000 mm): Pad 3 [<no net>] of Q1 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(74.7600 mm, 15.5600 mm): Segment of Q1 on F.Silkscreen
@(75.3000 mm, 16.0000 mm): Pad 1 [SW_5V] of C3 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(74.0000 mm, 16.5700 mm): Reference field of R1
@(75.3000 mm, 16.0000 mm): Pad 1 [SW_5V] of C3 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(74.5900 mm, 18.3456 mm): Segment of C3 on F.Silkscreen
@(74.8250 mm, 18.0000 mm): Pad 2 [BASE_LS] of R1 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(74.5900 mm, 18.3456 mm): Segment of C3 on F.Silkscreen
@(74.8250 mm, 18.0000 mm): Pad 2 [BASE_LS] of R1 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(90.4500 mm, 33.5000 mm): Reference field of P4
@(91.4750 mm, 32.0000 mm): Pad 2 [GND] of C32 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(90.0000 mm, 33.7000 mm): Reference field of C33
@(88.5250 mm, 32.0000 mm): Pad 1 [MAIN5V] of C32 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(93.8000 mm, 29.2000 mm): Segment of P4 on F.Silkscreen
@(94.9500 mm, 29.0000 mm): Pad 2 [GND] of C35 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(91.5400 mm, 38.5600 mm): Rectangle of P4 on F.Silkscreen
@(94.9500 mm, 29.0000 mm): Pad 2 [GND] of C35 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(91.5400 mm, 38.5600 mm): Rectangle of P4 on F.Silkscreen
@(93.0500 mm, 29.0000 mm): Pad 1 [BAT_PLUS] of C35 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(91.5400 mm, 38.5600 mm): Rectangle of P4 on F.Silkscreen
@(91.4750 mm, 36.0000 mm): Pad 2 [GND] of C33 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(91.5400 mm, 38.5600 mm): Rectangle of P4 on F.Silkscreen
@(91.4750 mm, 32.0000 mm): Pad 2 [GND] of C32 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(91.5500 mm, 35.2500 mm): Rectangle of P4 on F.Silkscreen
@(91.4750 mm, 36.0000 mm): Pad 2 [GND] of C33 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(91.5500 mm, 35.2500 mm): Rectangle of P4 on F.Silkscreen
@(91.4750 mm, 32.0000 mm): Pad 2 [GND] of C32 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(91.5500 mm, 38.5500 mm): Rectangle of P4 on F.Silkscreen
@(91.4750 mm, 36.0000 mm): Pad 2 [GND] of C33 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(90.0000 mm, 33.7000 mm): Reference field of C33
@(91.4750 mm, 32.0000 mm): Pad 2 [GND] of C32 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(91.9500 mm, 26.1500 mm): Segment of L6 on F.Silkscreen
@(89.9500 mm, 24.5000 mm): Pad 15 [IGATE] of U6 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(91.9500 mm, 26.1500 mm): Segment of L6 on F.Silkscreen
@(89.9500 mm, 24.0000 mm): Pad 16 [VEH5V] of U6 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(89.3850 mm, 21.3900 mm): Segment of U6 on F.Silkscreen
@(90.1000 mm, 22.0000 mm): Pad 1 [SW_BAT] of L6 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(90.1100 mm, 21.3900 mm): Segment of U6 on F.Silkscreen
@(90.1000 mm, 22.0000 mm): Pad 1 [SW_BAT] of L6 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(81.7387 mm, 16.7350 mm): Segment of C30 on F.Silkscreen
@(80.7000 mm, 16.0000 mm): Pad 2 [GND] of C3 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(30.9500 mm, 16.1500 mm): Segment of L2 on F.Silkscreen
@(28.4750 mm, 13.9050 mm): Pad 5 [GND] of U2 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(18.0000 mm, 23.5000 mm): Reference field of Q10
@(19.1750 mm, 24.0000 mm): Pad 1 [COMP_FAN] of Rcomp on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(12.7200 mm, 15.3800 mm): Segment of P1 on F.Silkscreen
@(11.8500 mm, 36.0000 mm): Pad 1 [24V_IN] of D10 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(12.7200 mm, 15.3800 mm): Segment of P1 on F.Silkscreen
@(12.9600 mm, 30.2800 mm): Pad 3 [<no net>] of Q10 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(12.7200 mm, 15.3800 mm): Segment of P1 on F.Silkscreen
@(12.9600 mm, 25.7200 mm): Pad 1 [<no net>] of Q10 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(10.6000 mm, 40.6200 mm): Segment of P1 on F.Silkscreen
@(11.8500 mm, 36.0000 mm): Pad 1 [24V_IN] of D10 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(12.1000 mm, 40.6200 mm): Segment of P1 on F.Silkscreen
@(11.8500 mm, 36.0000 mm): Pad 1 [24V_IN] of D10 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(12.1000 mm, 40.6200 mm): Segment of P1 on F.Silkscreen
@(12.9600 mm, 30.2800 mm): Pad 3 [<no net>] of Q10 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(12.1000 mm, 40.6200 mm): Segment of P1 on F.Silkscreen
@(12.9600 mm, 25.7200 mm): Pad 1 [<no net>] of Q10 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(22.7000 mm, 27.6200 mm): Polygon of DzG on F.Silkscreen
@(19.2600 mm, 28.0000 mm): Pad 2 [<no net>] of Q10 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(5.0000 mm, 5.0000 mm): Reference field of MH1
@(5.0000 mm, 5.0000 mm): NPTH pad of MH1
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(5.2500 mm, 75.6000 mm): Segment of P10 on F.Silkscreen
@(5.0000 mm, 75.0000 mm): NPTH pad of MH3
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(5.2500 mm, 76.8500 mm): Segment of P10 on F.Silkscreen
@(5.0000 mm, 75.0000 mm): NPTH pad of MH3
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(7.8000 mm, 75.8000 mm): Segment of P10 on F.Silkscreen
@(5.0000 mm, 75.0000 mm): NPTH pad of MH3
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(7.8000 mm, 76.5500 mm): Segment of P10 on F.Silkscreen
@(5.0000 mm, 75.0000 mm): NPTH pad of MH3
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(5.5400 mm, 76.5600 mm): Rectangle of P10 on F.Silkscreen
@(5.0000 mm, 75.0000 mm): NPTH pad of MH3
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(5.5500 mm, 76.5500 mm): Rectangle of P10 on F.Silkscreen
@(5.0000 mm, 75.0000 mm): NPTH pad of MH3
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(5.0000 mm, 75.0000 mm): Reference field of MH3
@(5.0000 mm, 75.0000 mm): NPTH pad of MH3
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(4.4500 mm, 72.7500 mm): Reference field of P10
@(5.0000 mm, 75.0000 mm): NPTH pad of MH3
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(5.5500 mm, 73.2500 mm): Rectangle of P10 on F.Silkscreen
@(5.0000 mm, 75.0000 mm): NPTH pad of MH3
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(5.5400 mm, 58.5600 mm): Rectangle of P6 on F.Silkscreen
@(12.0000 mm, 52.0000 mm): Pad 1 [5V_FAN] of D2 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(10.7500 mm, 46.7000 mm): Segment of P6 on F.Silkscreen
@(12.0000 mm, 52.0000 mm): Pad 1 [5V_FAN] of D2 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(10.7500 mm, 57.8000 mm): Segment of P6 on F.Silkscreen
@(12.0000 mm, 52.0000 mm): Pad 1 [5V_FAN] of D2 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(17.2400 mm, 52.4400 mm): Segment of Q2 on F.Silkscreen
@(16.0000 mm, 52.0000 mm): Pad 2 [FAN_RET] of D2 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(17.2400 mm, 52.4900 mm): Segment of Q2 on F.Silkscreen
@(16.0000 mm, 52.0000 mm): Pad 2 [FAN_RET] of D2 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(34.3150 mm, 76.9600 mm): Segment of DB4 on F.Silkscreen
@(36.5000 mm, 77.0000 mm): PTH pad 4 [I2C_SCL] of P5
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(18.0000 mm, 51.6000 mm): Reference field of Q2
@(16.0000 mm, 52.0000 mm): Pad 2 [FAN_RET] of D2 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(66.0000 mm, 70.5700 mm): Reference field of Rdfu
@(64.8250 mm, 70.0000 mm): Pad 2 [GND] of R41 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(91.4500 mm, 50.7500 mm): Reference field of P12
@(90.7750 mm, 52.0000 mm): Pad 2 [GND] of C24 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(30.9500 mm, 7.8500 mm): Segment of L2 on F.Silkscreen
@(31.6500 mm, 8.0000 mm): Pad 2 [VEH5V] of JP1 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(30.9500 mm, 7.8500 mm): Segment of L2 on F.Silkscreen
@(30.8500 mm, 7.2500 mm): Rectangle of JP1 on F.Mask
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(95.0000 mm, 75.0000 mm): Reference field of MH4
@(95.0000 mm, 75.0000 mm): NPTH pad of MH4
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(77.6510 mm, 71.8740 mm): Segment of K1 on F.Silkscreen
@(78.5000 mm, 76.0000 mm): PTH pad 4 [GNSS_RX] of P3
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(88.5600 mm, 78.4600 mm): Rectangle of P3 on F.Silkscreen
@(76.0000 mm, 76.7000 mm): PTH pad 6 [<no net>] of K1
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(75.9500 mm, 76.2000 mm): Segment of P3 on F.Silkscreen
@(76.0000 mm, 76.7000 mm): PTH pad 6 [<no net>] of K1
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(81.6400 mm, 69.0000 mm): Segment of D6 on F.Silkscreen
@(83.6200 mm, 69.0800 mm): PTH pad 10 [<no net>] of K1
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(64.0000 mm, 64.5700 mm): Reference field of R40
@(62.8600 mm, 64.2600 mm): PTH pad 20 [3V3] of J2
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(61.5300 mm, 65.5900 mm): Segment of J2 on F.Silkscreen
@(63.1750 mm, 66.0000 mm): Pad 1 [BYP_CTRL] of R40 on F.Cu
[silk_over_copper]: Silkscreen clipped by solder mask
Local override; warning
@(34.7000 mm, 77.2000 mm): Segment of P5 on F.Silkscreen
@(35.0625 mm, 76.0000 mm): Pad 1 [GND] of DB4 on F.Cu
** Found 213 unconnected pads **
[unconnected_items]: Missing connection between items
Local override; error
@(69.0625 mm, 18.9500 mm): Pad 2 [GATE_LS] of Q5 on F.Cu
@(77.1750 mm, 10.0000 mm): Pad 1 [GATE_LS] of R2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(-0.8250 mm, 0.0000 mm): Pad 1 [MAIN5V] of R53 on F.Cu
@(44.0000 mm, 8.0000 mm): PTH pad 1 [MAIN5V] of P2
[unconnected_items]: Missing connection between items
Local override; error
@(35.1750 mm, 56.0000 mm): Pad 1 [MAIN5V] of R7 on F.Cu
@(40.0000 mm, 64.2600 mm): PTH pad 20 [MAIN5V] of J1
[unconnected_items]: Missing connection between items
Local override; error
@(40.0000 mm, 64.2600 mm): PTH pad 20 [MAIN5V] of J1
@(62.8600 mm, 59.1800 mm): PTH pad 18 [MAIN5V] of J2
[unconnected_items]: Missing connection between items
Local override; error
@(52.0000 mm, 8.0000 mm): PTH pad 1 [MAIN5V] of P11
@(44.0000 mm, 8.0000 mm): PTH pad 1 [MAIN5V] of P2
[unconnected_items]: Missing connection between items
Local override; error
@(67.8625 mm, 10.0000 mm): Pad 1 [MAIN5V] of F1 on F.Cu
@(52.0000 mm, 8.0000 mm): PTH pad 1 [MAIN5V] of P11
[unconnected_items]: Missing connection between items
Local override; error
@(78.8250 mm, 10.0000 mm): Pad 2 [MAIN5V] of R2 on F.Cu
@(67.8625 mm, 10.0000 mm): Pad 1 [MAIN5V] of F1 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(80.7000 mm, 44.0000 mm): Pad 1 [MAIN5V] of JP2 on F.Cu
@(87.3000 mm, 44.0000 mm): Pad 3 [MAIN5V] of JP3 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(80.7000 mm, 44.0000 mm): Pad 1 [MAIN5V] of JP2 on F.Cu
@(62.8600 mm, 59.1800 mm): PTH pad 18 [MAIN5V] of J2
[unconnected_items]: Missing connection between items
Local override; error
@(85.0500 mm, 32.0000 mm): Pad 1 [MAIN5V] of C34 on F.Cu
@(88.5250 mm, 32.0000 mm): Pad 1 [MAIN5V] of C32 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(85.5250 mm, 11.0950 mm): Pad 1 [MAIN5V] of Q7 on F.Cu
@(85.5250 mm, 12.3650 mm): Pad 2 [MAIN5V] of Q7 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(85.5250 mm, 11.0950 mm): Pad 1 [MAIN5V] of Q7 on F.Cu
@(78.8250 mm, 10.0000 mm): Pad 2 [MAIN5V] of R2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(85.5250 mm, 13.6350 mm): Pad 3 [MAIN5V] of Q7 on F.Cu
@(85.5250 mm, 12.3650 mm): Pad 2 [MAIN5V] of Q7 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(85.5250 mm, 13.6350 mm): Pad 3 [MAIN5V] of Q7 on F.Cu
@(87.0000 mm, 21.5500 mm): Pad 24 [MAIN5V] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(86.0500 mm, 22.5000 mm): Pad 1 [MAIN5V] of U6 on F.Cu
@(87.0000 mm, 21.5500 mm): Pad 24 [MAIN5V] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(86.0500 mm, 22.5000 mm): Pad 1 [MAIN5V] of U6 on F.Cu
@(85.0500 mm, 32.0000 mm): Pad 1 [MAIN5V] of C34 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(88.5250 mm, 32.0000 mm): Pad 1 [MAIN5V] of C32 on F.Cu
@(88.5250 mm, 36.0000 mm): Pad 1 [MAIN5V] of C33 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(88.5250 mm, 36.0000 mm): Pad 1 [MAIN5V] of C33 on F.Cu
@(88.7000 mm, 44.0000 mm): Pad 1 [MAIN5V] of JP4 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(88.7000 mm, 44.0000 mm): Pad 1 [MAIN5V] of JP4 on F.Cu
@(87.3000 mm, 44.0000 mm): Pad 3 [MAIN5V] of JP3 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(62.8600 mm, 31.2400 mm): PTH pad 7 [USART1_RX] of J2
@(83.6200 mm, 64.0000 mm): PTH pad 12 [USART1_RX] of K1
[unconnected_items]: Missing connection between items
Local override; error
@(65.1750 mm, 72.0000 mm): Pad 1 [USART1_RX] of Rdfu on F.Cu
@(70.0000 mm, 78.5400 mm): PTH pad 2 [USART1_RX] of H3
[unconnected_items]: Missing connection between items
Local override; error
@(83.6200 mm, 64.0000 mm): PTH pad 12 [USART1_RX] of K1
@(95.0000 mm, 62.0000 mm): PTH pad 1 [USART1_RX] of P13
[unconnected_items]: Missing connection between items
Local override; error
@(83.6200 mm, 64.0000 mm): PTH pad 12 [USART1_RX] of K1
@(70.0000 mm, 78.5400 mm): PTH pad 2 [USART1_RX] of H3
[unconnected_items]: Missing connection between items
Local override; error
@(8.0000 mm, 33.0000 mm): PTH pad 2 [GND] of P1
@(16.1500 mm, 36.0000 mm): Pad 2 [GND] of D10 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(8.0000 mm, 71.5000 mm): PTH pad 2 [GND] of P10
@(16.8250 mm, 68.0000 mm): Pad 2 [GND] of Rled on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(14.0000 mm, 80.5000 mm): PTH pad 2 [GND] of SW1
@(20.5000 mm, 80.5000 mm): PTH pad 2 [GND] of SW1
[unconnected_items]: Missing connection between items
Local override; error
@(16.1500 mm, 36.0000 mm): Pad 2 [GND] of D10 on F.Cu
@(18.8250 mm, 34.0000 mm): Pad 2 [GND] of Rrp on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(16.8250 mm, 68.0000 mm): Pad 2 [GND] of Rled on F.Cu
@(22.8250 mm, 58.0000 mm): Pad 2 [GND] of Rgs on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(18.8250 mm, 34.0000 mm): Pad 2 [GND] of Rrp on F.Cu
@(24.7750 mm, 24.0000 mm): Pad 2 [GND] of Ccomp on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(20.9500 mm, 18.0000 mm): Pad 2 [GND] of C23 on F.Cu
@(16.8250 mm, 20.0000 mm): Pad 2 [GND] of R21 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(20.9500 mm, 18.0000 mm): Pad 2 [GND] of C23 on F.Cu
@(21.4750 mm, 12.0000 mm): Pad 2 [GND] of C22 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(21.4750 mm, 12.0000 mm): Pad 2 [GND] of C22 on F.Cu
@(23.5250 mm, 11.3650 mm): Pad 2 [GND] of U2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(21.4750 mm, 12.0000 mm): Pad 2 [GND] of C22 on F.Cu
@(0.8250 mm, 0.0000 mm): Pad 2 [GND] of R54 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(22.7750 mm, 46.0000 mm): Pad 2 [GND] of C9 on F.Cu
@(8.0000 mm, 51.0000 mm): PTH pad 3 [GND] of P6
[unconnected_items]: Missing connection between items
Local override; error
@(22.8250 mm, 58.0000 mm): Pad 2 [GND] of Rgs on F.Cu
@(22.7750 mm, 46.0000 mm): Pad 2 [GND] of C9 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(23.0625 mm, 76.0000 mm): Pad 1 [GND] of DB1 on F.Cu
@(20.5000 mm, 80.5000 mm): PTH pad 2 [GND] of SW1
[unconnected_items]: Missing connection between items
Local override; error
@(23.0625 mm, 76.0000 mm): Pad 1 [GND] of DB1 on F.Cu
@(16.8250 mm, 68.0000 mm): Pad 2 [GND] of Rled on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(23.5250 mm, 11.3650 mm): Pad 2 [GND] of U2 on F.Cu
@(28.4750 mm, 13.9050 mm): Pad 5 [GND] of U2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(24.7750 mm, 24.0000 mm): Pad 2 [GND] of Ccomp on F.Cu
@(28.8250 mm, 24.0000 mm): Pad 2 [GND] of Rfreq on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(27.0625 mm, 76.0000 mm): Pad 1 [GND] of DB2 on F.Cu
@(31.0625 mm, 76.0000 mm): Pad 1 [GND] of DB3 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(27.0625 mm, 76.0000 mm): Pad 1 [GND] of DB2 on F.Cu
@(23.0625 mm, 76.0000 mm): Pad 1 [GND] of DB1 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(28.0000 mm, 18.0000 mm): Pad 2 [GND] of Dbk on F.Cu
@(28.4750 mm, 13.9050 mm): Pad 5 [GND] of U2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(28.8250 mm, 24.0000 mm): Pad 2 [GND] of Rfreq on F.Cu
@(28.0000 mm, 18.0000 mm): Pad 2 [GND] of Dbk on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(30.7000 mm, 37.0000 mm): Pad 2 [GND] of C10 on F.Cu
@(33.7750 mm, 34.0000 mm): Pad 2 [GND] of C11 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(30.7000 mm, 37.0000 mm): Pad 2 [GND] of C10 on F.Cu
@(22.7750 mm, 46.0000 mm): Pad 2 [GND] of C9 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(31.0625 mm, 76.0000 mm): Pad 1 [GND] of DB3 on F.Cu
@(35.0625 mm, 76.0000 mm): Pad 1 [GND] of DB4 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(32.8250 mm, 60.0000 mm): Pad 2 [GND] of R6 on F.Cu
@(36.8250 mm, 60.0000 mm): Pad 2 [GND] of R8 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(32.8250 mm, 60.0000 mm): Pad 2 [GND] of R6 on F.Cu
@(22.8250 mm, 58.0000 mm): Pad 2 [GND] of Rgs on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(33.7750 mm, 34.0000 mm): Pad 2 [GND] of C11 on F.Cu
@(36.8250 mm, 24.0000 mm): Pad 2 [GND] of Ren2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(36.7750 mm, 64.0000 mm): Pad 2 [GND] of C7 on F.Cu
@(40.0000 mm, 61.7200 mm): PTH pad 19 [GND] of J1
[unconnected_items]: Missing connection between items
Local override; error
@(36.7750 mm, 64.0000 mm): Pad 2 [GND] of C7 on F.Cu
@(32.7750 mm, 64.0000 mm): Pad 2 [GND] of C5 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(36.8250 mm, 24.0000 mm): Pad 2 [GND] of Ren2 on F.Cu
@(28.8250 mm, 24.0000 mm): Pad 2 [GND] of Rfreq on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(36.8250 mm, 24.0000 mm): Pad 2 [GND] of Ren2 on F.Cu
@(46.5000 mm, 8.0000 mm): PTH pad 2 [GND] of P2
[unconnected_items]: Missing connection between items
Local override; error
@(36.8250 mm, 60.0000 mm): Pad 2 [GND] of R8 on F.Cu
@(40.0000 mm, 61.7200 mm): PTH pad 19 [GND] of J1
[unconnected_items]: Missing connection between items
Local override; error
@(41.5000 mm, 77.0000 mm): PTH pad 2 [GND] of P5
@(35.0625 mm, 76.0000 mm): Pad 1 [GND] of DB4 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(48.7000 mm, 73.6000 mm): Pad 4 [GND] of U3 on F.Cu
@(41.5000 mm, 77.0000 mm): PTH pad 2 [GND] of P5
[unconnected_items]: Missing connection between items
Local override; error
@(53.2875 mm, 74.0000 mm): Pad 2 [GND] of U4 on F.Cu
@(54.7125 mm, 74.5000 mm): Pad 4 [GND] of U4 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(53.2875 mm, 74.0000 mm): Pad 2 [GND] of U4 on F.Cu
@(48.7000 mm, 73.6000 mm): Pad 4 [GND] of U3 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(58.7750 mm, 74.0000 mm): Pad 2 [GND] of Cu4 on F.Cu
@(58.7750 mm, 70.0000 mm): Pad 2 [GND] of Cu3 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(58.7750 mm, 74.0000 mm): Pad 2 [GND] of Cu4 on F.Cu
@(54.7125 mm, 74.5000 mm): Pad 4 [GND] of U4 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(62.8600 mm, 61.7200 mm): PTH pad 19 [GND] of J2
@(64.8250 mm, 70.0000 mm): Pad 2 [GND] of R41 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(64.8250 mm, 70.0000 mm): Pad 2 [GND] of R41 on F.Cu
@(58.7750 mm, 70.0000 mm): Pad 2 [GND] of Cu3 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(64.8250 mm, 70.0000 mm): Pad 2 [GND] of R41 on F.Cu
@(70.0000 mm, 81.0800 mm): PTH pad 3 [GND] of H3
[unconnected_items]: Missing connection between items
Local override; error
@(68.9375 mm, 68.0000 mm): Pad 3 [GND] of Q6 on F.Cu
@(64.8250 mm, 70.0000 mm): Pad 2 [GND] of R41 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(70.0000 mm, 81.0800 mm): PTH pad 3 [GND] of H3
@(83.5000 mm, 76.0000 mm): PTH pad 2 [GND] of P3
[unconnected_items]: Missing connection between items
Local override; error
@(70.9375 mm, 18.0000 mm): Pad 3 [GND] of Q5 on F.Cu
@(80.7000 mm, 16.0000 mm): Pad 2 [GND] of C3 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(82.7750 mm, 20.0000 mm): Pad 2 [GND] of C31 on F.Cu
@(86.0500 mm, 24.5000 mm): Pad 5 [GND] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(82.8250 mm, 30.0000 mm): Pad 2 [GND] of R52 on F.Cu
@(86.0500 mm, 24.5000 mm): Pad 5 [GND] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(82.8250 mm, 34.0000 mm): Pad 2 [GND] of R50 on F.Cu
@(82.8250 mm, 30.0000 mm): Pad 2 [GND] of R52 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(82.8250 mm, 38.0000 mm): Pad 2 [GND] of R56 on F.Cu
@(82.8250 mm, 34.0000 mm): Pad 2 [GND] of R50 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(82.9500 mm, 16.0000 mm): Pad 2 [GND] of C30 on F.Cu
@(80.7000 mm, 16.0000 mm): Pad 2 [GND] of C3 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(82.9500 mm, 16.0000 mm): Pad 2 [GND] of C30 on F.Cu
@(82.7750 mm, 20.0000 mm): Pad 2 [GND] of C31 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(83.3000 mm, 44.0000 mm): Pad 3 [GND] of JP2 on F.Cu
@(82.8250 mm, 38.0000 mm): Pad 2 [GND] of R56 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(83.5000 mm, 76.0000 mm): PTH pad 2 [GND] of P3
@(95.0000 mm, 57.0000 mm): PTH pad 3 [GND] of P13
[unconnected_items]: Missing connection between items
Local override; error
@(84.7000 mm, 44.0000 mm): Pad 1 [GND] of JP3 on F.Cu
@(83.3000 mm, 44.0000 mm): Pad 3 [GND] of JP2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(86.0500 mm, 24.5000 mm): Pad 5 [GND] of U6 on F.Cu
@(88.0000 mm, 24.0000 mm): Pad 25 [GND] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(86.9500 mm, 32.0000 mm): Pad 2 [GND] of C34 on F.Cu
@(91.4750 mm, 32.0000 mm): Pad 2 [GND] of C32 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(86.9500 mm, 32.0000 mm): Pad 2 [GND] of C34 on F.Cu
@(82.8250 mm, 34.0000 mm): Pad 2 [GND] of R50 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(91.3000 mm, 44.0000 mm): Pad 3 [GND] of JP4 on F.Cu
@(84.7000 mm, 44.0000 mm): Pad 1 [GND] of JP3 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(91.3000 mm, 44.0000 mm): Pad 3 [GND] of JP4 on F.Cu
@(95.0000 mm, 49.5000 mm): PTH pad 2 [GND] of P12
[unconnected_items]: Missing connection between items
Local override; error
@(94.0000 mm, 33.5000 mm): PTH pad 2 [GND] of P4
@(91.4750 mm, 32.0000 mm): Pad 2 [GND] of C32 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(94.0000 mm, 33.5000 mm): PTH pad 2 [GND] of P4
@(91.4750 mm, 36.0000 mm): Pad 2 [GND] of C33 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(94.9500 mm, 29.0000 mm): Pad 2 [GND] of C35 on F.Cu
@(91.4750 mm, 32.0000 mm): Pad 2 [GND] of C32 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(95.0000 mm, 49.5000 mm): PTH pad 2 [GND] of P12
@(90.7750 mm, 52.0000 mm): Pad 2 [GND] of C24 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(95.0000 mm, 57.0000 mm): PTH pad 3 [GND] of P13
@(90.7750 mm, 52.0000 mm): Pad 2 [GND] of C24 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(24.0000 mm, 18.0000 mm): Pad 1 [SW_FAN] of Dbk on F.Cu
@(31.7750 mm, 18.0000 mm): Pad 2 [SW_FAN] of Cbst on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(31.7750 mm, 18.0000 mm): Pad 2 [SW_FAN] of Cbst on F.Cu
@(29.1000 mm, 12.0000 mm): Pad 1 [SW_FAN] of L2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(8.0000 mm, 56.0000 mm): PTH pad 1 [5V_FAN] of P6
@(12.0000 mm, 52.0000 mm): Pad 1 [5V_FAN] of D2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(19.0500 mm, 18.0000 mm): Pad 1 [5V_FAN] of C23 on F.Cu
@(15.1750 mm, 16.0000 mm): Pad 1 [5V_FAN] of R20 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(19.0500 mm, 18.0000 mm): Pad 1 [5V_FAN] of C23 on F.Cu
@(23.5250 mm, 12.6350 mm): Pad 3 [5V_FAN] of U2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(19.0500 mm, 18.0000 mm): Pad 1 [5V_FAN] of C23 on F.Cu
@(12.0000 mm, 52.0000 mm): Pad 1 [5V_FAN] of D2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(30.3500 mm, 8.0000 mm): Pad 1 [5V_FAN] of JP1 on F.Cu
@(23.5250 mm, 12.6350 mm): Pad 3 [5V_FAN] of U2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(36.9000 mm, 12.0000 mm): Pad 2 [5V_FAN] of L2 on F.Cu
@(30.3500 mm, 8.0000 mm): Pad 1 [5V_FAN] of JP1 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(8.0000 mm, 53.5000 mm): PTH pad 2 [FAN_RET] of P6
@(16.0000 mm, 52.0000 mm): Pad 2 [FAN_RET] of D2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(8.0000 mm, 48.5000 mm): PTH pad 4 [FAN_TACH_RAW] of P6
@(25.1750 mm, 54.0000 mm): Pad 1 [FAN_TACH_RAW] of Rts on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(32.8250 mm, 24.0000 mm): Pad 2 [EN_FAN] of Ren1 on F.Cu
@(35.1750 mm, 24.0000 mm): Pad 1 [EN_FAN] of Ren2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(28.8250 mm, 72.0000 mm): Pad 2 [BLED2] of RB2 on F.Cu
@(28.9375 mm, 76.0000 mm): Pad 2 [BLED2] of DB2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(31.1750 mm, 56.0000 mm): Pad 1 [BAT_PLUS] of R5 on F.Cu
@(94.0000 mm, 36.0000 mm): PTH pad 1 [BAT_PLUS] of P4
[unconnected_items]: Missing connection between items
Local override; error
@(87.5000 mm, 21.5500 mm): Pad 23 [BAT_PLUS] of U6 on F.Cu
@(93.0500 mm, 29.0000 mm): Pad 1 [BAT_PLUS] of C35 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(93.0500 mm, 29.0000 mm): Pad 1 [BAT_PLUS] of C35 on F.Cu
@(97.9000 mm, 22.0000 mm): Pad 2 [BAT_PLUS] of L6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(94.0000 mm, 36.0000 mm): PTH pad 1 [BAT_PLUS] of P4
@(93.0500 mm, 29.0000 mm): Pad 1 [BAT_PLUS] of C35 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(86.8250 mm, 38.0000 mm): Pad 2 [NTC] of R55 on F.Cu
@(94.0000 mm, 31.0000 mm): PTH pad 3 [NTC] of P4
[unconnected_items]: Missing connection between items
Local override; error
@(94.0000 mm, 31.0000 mm): PTH pad 3 [NTC] of P4
@(89.9500 mm, 23.5000 mm): Pad 17 [NTC] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(8.0000 mm, 74.0000 mm): PTH pad 1 [NRST] of P10
@(14.0000 mm, 76.0000 mm): PTH pad 1 [NRST] of SW1
[unconnected_items]: Missing connection between items
Local override; error
@(14.0000 mm, 76.0000 mm): PTH pad 1 [NRST] of SW1
@(20.5000 mm, 76.0000 mm): PTH pad 1 [NRST] of SW1
[unconnected_items]: Missing connection between items
Local override; error
@(20.5000 mm, 76.0000 mm): PTH pad 1 [NRST] of SW1
@(40.0000 mm, 26.1600 mm): PTH pad 5 [NRST] of J1
[unconnected_items]: Missing connection between items
Local override; error
@(20.8250 mm, 24.0000 mm): Pad 2 [CC_FAN] of Rcomp on F.Cu
@(23.2250 mm, 24.0000 mm): Pad 1 [CC_FAN] of Ccomp on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(24.8250 mm, 72.0000 mm): Pad 2 [BLED1] of RB1 on F.Cu
@(24.9375 mm, 76.0000 mm): Pad 2 [BLED1] of DB1 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(31.1750 mm, 60.0000 mm): Pad 1 [BAT_SENSE] of R6 on F.Cu
@(31.2250 mm, 64.0000 mm): Pad 1 [BAT_SENSE] of C5 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(32.8250 mm, 56.0000 mm): Pad 2 [BAT_SENSE] of R5 on F.Cu
@(31.1750 mm, 60.0000 mm): Pad 1 [BAT_SENSE] of R6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(32.8250 mm, 56.0000 mm): Pad 2 [BAT_SENSE] of R5 on F.Cu
@(40.0000 mm, 28.7000 mm): PTH pad 6 [BAT_SENSE] of J1
[unconnected_items]: Missing connection between items
Local override; error
@(40.0000 mm, 31.2400 mm): PTH pad 7 [PWR_CTRL] of J1
@(73.1750 mm, 18.0000 mm): Pad 1 [PWR_CTRL] of R1 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(40.0000 mm, 33.7800 mm): PTH pad 8 [GNSS_TX] of J1
@(81.0000 mm, 76.0000 mm): PTH pad 3 [GNSS_TX] of P3
[unconnected_items]: Missing connection between items
Local override; error
@(40.0000 mm, 36.3200 mm): PTH pad 9 [GNSS_RX] of J1
@(78.5000 mm, 76.0000 mm): PTH pad 4 [GNSS_RX] of P3
[unconnected_items]: Missing connection between items
Local override; error
@(35.1750 mm, 60.0000 mm): Pad 1 [5V_SENSE] of R8 on F.Cu
@(35.2250 mm, 64.0000 mm): Pad 1 [5V_SENSE] of C7 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(36.8250 mm, 56.0000 mm): Pad 2 [5V_SENSE] of R7 on F.Cu
@(35.1750 mm, 60.0000 mm): Pad 1 [5V_SENSE] of R8 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(36.8250 mm, 56.0000 mm): Pad 2 [5V_SENSE] of R7 on F.Cu
@(40.0000 mm, 38.8600 mm): PTH pad 10 [5V_SENSE] of J1
[unconnected_items]: Missing connection between items
Local override; error
@(14.8250 mm, 46.0000 mm): Pad 2 [IGN_SENSE] of Rig on F.Cu
@(19.6500 mm, 46.0000 mm): Pad 2 [IGN_SENSE] of D5 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(19.6500 mm, 46.0000 mm): Pad 2 [IGN_SENSE] of D5 on F.Cu
@(21.2250 mm, 46.0000 mm): Pad 1 [IGN_SENSE] of C9 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(21.2250 mm, 46.0000 mm): Pad 1 [IGN_SENSE] of C9 on F.Cu
@(40.0000 mm, 41.4000 mm): PTH pad 11 [IGN_SENSE] of J1
[unconnected_items]: Missing connection between items
Local override; error
@(21.1750 mm, 52.0000 mm): Pad 1 [FAN_PWM] of Rg on F.Cu
@(40.0000 mm, 43.9400 mm): PTH pad 12 [FAN_PWM] of J1
[unconnected_items]: Missing connection between items
Local override; error
@(15.1750 mm, 68.0000 mm): Pad 1 [EXT_LED] of Rled on F.Cu
@(40.0000 mm, 49.0200 mm): PTH pad 14 [EXT_LED] of J1
[unconnected_items]: Missing connection between items
Local override; error
@(40.0000 mm, 51.5600 mm): PTH pad 15 [NTC_TEMP] of J1
@(86.8250 mm, 52.0000 mm): Pad 2 [NTC_TEMP] of R42 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(86.8250 mm, 52.0000 mm): Pad 2 [NTC_TEMP] of R42 on F.Cu
@(89.2250 mm, 52.0000 mm): Pad 1 [NTC_TEMP] of C24 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(89.2250 mm, 52.0000 mm): Pad 1 [NTC_TEMP] of C24 on F.Cu
@(95.0000 mm, 52.0000 mm): PTH pad 1 [NTC_TEMP] of P12
[unconnected_items]: Missing connection between items
Local override; error
@(26.8250 mm, 54.0000 mm): Pad 2 [FAN_TACH] of Rts on F.Cu
@(26.8250 mm, 58.0000 mm): Pad 2 [FAN_TACH] of Rtp on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(26.8250 mm, 58.0000 mm): Pad 2 [FAN_TACH] of Rtp on F.Cu
@(40.0000 mm, 56.6400 mm): PTH pad 17 [FAN_TACH] of J1
[unconnected_items]: Missing connection between items
Local override; error
@(25.1750 mm, 58.0000 mm): Pad 1 [3V3] of Rtp on F.Cu
@(19.1750 mm, 64.0000 mm): Pad 1 [3V3] of R3 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(25.1750 mm, 58.0000 mm): Pad 1 [3V3] of Rtp on F.Cu
@(16.3500 mm, 46.0000 mm): Pad 1 [3V3] of D5 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(40.0000 mm, 59.1800 mm): PTH pad 18 [3V3] of J1
@(47.1750 mm, 70.0000 mm): Pad 1 [3V3] of R30 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(40.0000 mm, 59.1800 mm): PTH pad 18 [3V3] of J1
@(25.1750 mm, 58.0000 mm): Pad 1 [3V3] of Rtp on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(47.1750 mm, 70.0000 mm): Pad 1 [3V3] of R30 on F.Cu
@(48.7000 mm, 74.4000 mm): Pad 3 [3V3] of U3 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(48.7000 mm, 74.4000 mm): Pad 3 [3V3] of U3 on F.Cu
@(44.0000 mm, 77.0000 mm): PTH pad 1 [3V3] of P5
[unconnected_items]: Missing connection between items
Local override; error
@(51.1750 mm, 70.0000 mm): Pad 1 [3V3] of R31 on F.Cu
@(47.1750 mm, 70.0000 mm): Pad 1 [3V3] of R30 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(51.1750 mm, 70.0000 mm): Pad 1 [3V3] of R31 on F.Cu
@(54.7125 mm, 74.0000 mm): Pad 5 [3V3] of U4 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(57.2250 mm, 70.0000 mm): Pad 1 [3V3] of Cu3 on F.Cu
@(57.2250 mm, 74.0000 mm): Pad 1 [3V3] of Cu4 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(57.2250 mm, 74.0000 mm): Pad 1 [3V3] of Cu4 on F.Cu
@(54.7125 mm, 74.0000 mm): Pad 5 [3V3] of U4 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(62.8600 mm, 64.2600 mm): PTH pad 20 [3V3] of J2
@(57.2250 mm, 70.0000 mm): Pad 1 [3V3] of Cu3 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(62.8600 mm, 64.2600 mm): PTH pad 20 [3V3] of J2
@(66.8250 mm, 72.0000 mm): Pad 2 [3V3] of Rdfu on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(62.8600 mm, 64.2600 mm): PTH pad 20 [3V3] of J2
@(73.1750 mm, 44.0000 mm): Pad 1 [3V3] of R57 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(77.1750 mm, 44.0000 mm): Pad 1 [3V3] of R58 on F.Cu
@(73.1750 mm, 44.0000 mm): Pad 1 [3V3] of R57 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(85.1750 mm, 52.0000 mm): Pad 1 [3V3] of R42 on F.Cu
@(77.1750 mm, 44.0000 mm): Pad 1 [3V3] of R58 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(54.5000 mm, 8.0000 mm): PTH pad 2 [SYS5V] of P11
@(82.3500 mm, 68.0000 mm): Pad 1 [SYS5V] of D6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(21.1750 mm, 58.0000 mm): Pad 1 [FAN_GATE] of Rgs on F.Cu
@(22.8250 mm, 52.0000 mm): Pad 2 [FAN_GATE] of Rg on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(85.5250 mm, 14.9050 mm): Pad 4 [IGATE] of Q7 on F.Cu
@(89.9500 mm, 24.5000 mm): Pad 15 [IGATE] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(86.0500 mm, 25.5000 mm): Pad 7 [VIN_SW] of U6 on F.Cu
@(90.4750 mm, 14.9050 mm): Pad 5 [VIN_SW] of Q7 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(90.4750 mm, 11.0950 mm): Pad 8 [VIN_SW] of Q7 on F.Cu
@(85.4625 mm, 8.0000 mm): Pad 2 [VIN_SW] of RS1 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(90.4750 mm, 12.3650 mm): Pad 7 [VIN_SW] of Q7 on F.Cu
@(90.4750 mm, 11.0950 mm): Pad 8 [VIN_SW] of Q7 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(90.4750 mm, 13.6350 mm): Pad 6 [VIN_SW] of Q7 on F.Cu
@(90.4750 mm, 12.3650 mm): Pad 7 [VIN_SW] of Q7 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(90.4750 mm, 14.9050 mm): Pad 5 [VIN_SW] of Q7 on F.Cu
@(90.4750 mm, 13.6350 mm): Pad 6 [VIN_SW] of Q7 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(47.3000 mm, 73.6000 mm): Pad 1 [I2C_SDA] of U3 on F.Cu
@(52.8250 mm, 70.0000 mm): Pad 2 [I2C_SDA] of R31 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(47.3000 mm, 73.6000 mm): Pad 1 [I2C_SDA] of U3 on F.Cu
@(39.0000 mm, 77.0000 mm): PTH pad 3 [I2C_SDA] of P5
[unconnected_items]: Missing connection between items
Local override; error
@(52.8250 mm, 70.0000 mm): Pad 2 [I2C_SDA] of R31 on F.Cu
@(54.7125 mm, 73.5000 mm): Pad 6 [I2C_SDA] of U4 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(62.8600 mm, 51.5600 mm): PTH pad 15 [I2C_SDA] of J2
@(52.8250 mm, 70.0000 mm): Pad 2 [I2C_SDA] of R31 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(36.5000 mm, 77.0000 mm): PTH pad 4 [I2C_SCL] of P5
@(47.3000 mm, 74.4000 mm): Pad 2 [I2C_SCL] of U3 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(47.3000 mm, 74.4000 mm): Pad 2 [I2C_SCL] of U3 on F.Cu
@(48.8250 mm, 70.0000 mm): Pad 2 [I2C_SCL] of R30 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(48.8250 mm, 70.0000 mm): Pad 2 [I2C_SCL] of R30 on F.Cu
@(62.8600 mm, 49.0200 mm): PTH pad 14 [I2C_SCL] of J2
[unconnected_items]: Missing connection between items
Local override; error
@(53.2875 mm, 73.5000 mm): Pad 1 [I2C_SCL] of U4 on F.Cu
@(48.8250 mm, 70.0000 mm): Pad 2 [I2C_SCL] of R30 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(81.0500 mm, 16.0000 mm): Pad 1 [VEH5V] of C30 on F.Cu
@(31.6500 mm, 8.0000 mm): Pad 2 [VEH5V] of JP1 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(81.1750 mm, 26.0000 mm): Pad 1 [VEH5V] of R51 on F.Cu
@(86.0500 mm, 25.0000 mm): Pad 6 [VEH5V] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(81.2250 mm, 20.0000 mm): Pad 1 [VEH5V] of C31 on F.Cu
@(81.0500 mm, 16.0000 mm): Pad 1 [VEH5V] of C30 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(81.2250 mm, 20.0000 mm): Pad 1 [VEH5V] of C31 on F.Cu
@(81.1750 mm, 26.0000 mm): Pad 1 [VEH5V] of R51 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(82.5375 mm, 8.0000 mm): Pad 1 [VEH5V] of RS1 on F.Cu
@(81.0500 mm, 16.0000 mm): Pad 1 [VEH5V] of C30 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(85.1750 mm, 38.0000 mm): Pad 1 [VEH5V] of R55 on F.Cu
@(81.1750 mm, 26.0000 mm): Pad 1 [VEH5V] of R51 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(86.0500 mm, 25.0000 mm): Pad 6 [VEH5V] of U6 on F.Cu
@(89.9500 mm, 24.0000 mm): Pad 16 [VEH5V] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(8.0000 mm, 38.0000 mm): PTH pad 1 [24V_IN] of P1
@(11.8500 mm, 36.0000 mm): Pad 1 [24V_IN] of D10 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(69.0625 mm, 17.0500 mm): Pad 1 [BASE_LS] of Q5 on F.Cu
@(74.8250 mm, 18.0000 mm): Pad 2 [BASE_LS] of R1 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(16.8250 mm, 16.0000 mm): Pad 2 [FB_FAN] of R20 on F.Cu
@(15.1750 mm, 20.0000 mm): Pad 1 [FB_FAN] of R21 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(23.5250 mm, 13.9050 mm): Pad 4 [FB_FAN] of U2 on F.Cu
@(16.8250 mm, 16.0000 mm): Pad 2 [FB_FAN] of R20 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(28.4750 mm, 10.0950 mm): Pad 8 [BST_FAN] of U2 on F.Cu
@(30.2250 mm, 18.0000 mm): Pad 1 [BST_FAN] of Cbst on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(62.8600 mm, 28.7000 mm): PTH pad 6 [USART1_TX] of J2
@(70.0000 mm, 76.0000 mm): PTH pad 1 [USART1_TX] of H3
[unconnected_items]: Missing connection between items
Local override; error
@(88.5000 mm, 21.5500 mm): Pad 21 [SW_BAT] of U6 on F.Cu
@(88.0000 mm, 21.5500 mm): Pad 22 [SW_BAT] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(90.1000 mm, 22.0000 mm): Pad 1 [SW_BAT] of L6 on F.Cu
@(88.5000 mm, 21.5500 mm): Pad 21 [SW_BAT] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(31.1750 mm, 72.0000 mm): Pad 1 [BATLED3] of RB3 on F.Cu
@(62.8600 mm, 21.0800 mm): PTH pad 3 [BATLED3] of J2
[unconnected_items]: Missing connection between items
Local override; error
@(32.8250 mm, 72.0000 mm): Pad 2 [BLED3] of RB3 on F.Cu
@(32.9375 mm, 76.0000 mm): Pad 2 [BLED3] of DB3 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(86.0500 mm, 23.5000 mm): Pad 3 [CLPROG_TP] of U6 on F.Cu
@(94.0000 mm, 44.0000 mm): Pad 1 [CLPROG_TP] of TP1 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(23.0625 mm, 27.0500 mm): Pad 1 [24V] of DzG on F.Cu
@(23.3000 mm, 37.0000 mm): Pad 1 [24V] of C10 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(23.3000 mm, 37.0000 mm): Pad 1 [24V] of C10 on F.Cu
@(32.2250 mm, 34.0000 mm): Pad 1 [24V] of C11 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(23.5250 mm, 10.0950 mm): Pad 1 [24V] of U2 on F.Cu
@(18.5250 mm, 12.0000 mm): Pad 1 [24V] of C22 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(28.4750 mm, 11.3650 mm): Pad 7 [24V] of U2 on F.Cu
@(23.5250 mm, 10.0950 mm): Pad 1 [24V] of U2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(31.1750 mm, 24.0000 mm): Pad 1 [24V] of Ren1 on F.Cu
@(23.0625 mm, 27.0500 mm): Pad 1 [24V] of DzG on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(31.1750 mm, 24.0000 mm): Pad 1 [24V] of Ren1 on F.Cu
@(28.4750 mm, 11.3650 mm): Pad 7 [24V] of U2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(27.1750 mm, 24.0000 mm): Pad 1 [FREQ_FAN] of Rfreq on F.Cu
@(28.4750 mm, 12.6350 mm): Pad 6 [FREQ_FAN] of U2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(35.1750 mm, 72.0000 mm): Pad 1 [BATLED4] of RB4 on F.Cu
@(62.8600 mm, 23.6200 mm): PTH pad 4 [BATLED4] of J2
[unconnected_items]: Missing connection between items
Local override; error
@(36.8250 mm, 72.0000 mm): Pad 2 [BLED4] of RB4 on F.Cu
@(36.9375 mm, 76.0000 mm): Pad 2 [BLED4] of DB4 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(89.9500 mm, 25.0000 mm): Pad 14 [F0_SEL] of U6 on F.Cu
@(90.0000 mm, 44.0000 mm): Pad 2 [F0_SEL] of JP4 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(8.0000 mm, 63.5000 mm): PTH pad 2 [LED_K] of P8
@(8.0000 mm, 66.0000 mm): PTH pad 1 [LED_K] of P8
[unconnected_items]: Missing connection between items
Local override; error
@(8.0000 mm, 66.0000 mm): PTH pad 1 [LED_K] of P8
@(19.0625 mm, 68.0000 mm): Pad 1 [LED_K] of D1 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(19.0625 mm, 68.0000 mm): Pad 1 [LED_K] of D1 on F.Cu
@(20.9375 mm, 68.0000 mm): Pad 2 [LED_K] of D1 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(64.8250 mm, 66.0000 mm): Pad 2 [Q6_BASE] of R40 on F.Cu
@(63.1750 mm, 70.0000 mm): Pad 1 [Q6_BASE] of R41 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(67.0625 mm, 67.0500 mm): Pad 1 [Q6_BASE] of Q6 on F.Cu
@(64.8250 mm, 66.0000 mm): Pad 2 [Q6_BASE] of R40 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(27.1750 mm, 72.0000 mm): Pad 1 [BATLED2] of RB2 on F.Cu
@(62.8600 mm, 18.5400 mm): PTH pad 2 [BATLED2] of J2
[unconnected_items]: Missing connection between items
Local override; error
@(8.0000 mm, 28.0000 mm): PTH pad 3 [IGN_IN] of P1
@(13.1750 mm, 46.0000 mm): Pad 1 [IGN_IN] of Rig on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(82.8250 mm, 26.0000 mm): Pad 2 [PFI] of R51 on F.Cu
@(81.1750 mm, 30.0000 mm): Pad 1 [PFI] of R52 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(89.9500 mm, 22.5000 mm): Pad 19 [PFI] of U6 on F.Cu
@(82.8250 mm, 26.0000 mm): Pad 2 [PFI] of R51 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(23.1750 mm, 72.0000 mm): Pad 1 [BATLED1] of RB1 on F.Cu
@(62.8600 mm, 16.0000 mm): PTH pad 1 [BATLED1] of J2
[unconnected_items]: Missing connection between items
Local override; error
@(62.8600 mm, 26.1600 mm): PTH pad 5 [CHRG_EN] of J2
@(81.1750 mm, 38.0000 mm): Pad 1 [CHRG_EN] of R56 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(81.1750 mm, 38.0000 mm): Pad 1 [CHRG_EN] of R56 on F.Cu
@(86.0500 mm, 24.0000 mm): Pad 4 [CHRG_EN] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(62.8600 mm, 41.4000 mm): PTH pad 11 [CHRG_STAT] of J2
@(74.8250 mm, 44.0000 mm): Pad 2 [CHRG_STAT] of R57 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(74.8250 mm, 44.0000 mm): Pad 2 [CHRG_STAT] of R57 on F.Cu
@(87.0000 mm, 26.4500 mm): Pad 8 [CHRG_STAT] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(62.8600 mm, 43.9400 mm): PTH pad 12 [CHRG_FAULT] of J2
@(78.8250 mm, 44.0000 mm): Pad 2 [CHRG_FAULT] of R58 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(78.8250 mm, 44.0000 mm): Pad 2 [CHRG_FAULT] of R58 on F.Cu
@(87.5000 mm, 26.4500 mm): Pad 9 [CHRG_FAULT] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(62.8600 mm, 46.4800 mm): PTH pad 13 [BYP_CTRL] of J2
@(63.1750 mm, 66.0000 mm): Pad 1 [BYP_CTRL] of R40 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(17.1750 mm, 34.0000 mm): Pad 1 [Q10_GATE] of Rrp on F.Cu
@(23.0625 mm, 28.9500 mm): Pad 2 [Q10_GATE] of DzG on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(81.1750 mm, 34.0000 mm): Pad 1 [PROG] of R50 on F.Cu
@(86.0500 mm, 23.0000 mm): Pad 2 [PROG] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(0.8250 mm, 0.0000 mm): Pad 2 [VFB_BST] of R53 on F.Cu
@(-0.8250 mm, 0.0000 mm): Pad 1 [VFB_BST] of R54 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(0.8250 mm, 0.0000 mm): Pad 2 [VFB_BST] of R53 on F.Cu
@(88.0000 mm, 26.4500 mm): Pad 10 [VFB_BST] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(88.0000 mm, 26.4500 mm): Pad 10 [VFB_BST] of U6 on F.Cu
@(89.9500 mm, 23.0000 mm): Pad 18 [VFB_BST] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(82.0000 mm, 44.0000 mm): Pad 2 [F2_SEL] of JP2 on F.Cu
@(89.0000 mm, 26.4500 mm): Pad 12 [F2_SEL] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(86.0000 mm, 44.0000 mm): Pad 2 [F1_SEL] of JP3 on F.Cu
@(89.9500 mm, 25.5000 mm): Pad 13 [F1_SEL] of U6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(89.0000 mm, 21.5500 mm): Pad 20 [PFO_TP] of U6 on F.Cu
@(96.0000 mm, 41.0000 mm): Pad 1 [PFO_TP] of TP2 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(67.0625 mm, 68.9500 mm): Pad 2 [KCOIL] of Q6 on F.Cu
@(85.6500 mm, 68.0000 mm): Pad 2 [KCOIL] of D6 on F.Cu
[unconnected_items]: Missing connection between items
Local override; error
@(75.3000 mm, 16.0000 mm): Pad 1 [SW_5V] of C3 on F.Cu
@(86.0000 mm, 76.0000 mm): PTH pad 1 [SW_5V] of P3
** Found 0 Footprint errors **
** Ignored checks **
- Footprint has no courtyard defined
- Track endpoint not centered on via
- Tuning profile track geometries
- Footprint doesn't match symbol's footprint filters
- Footprint component type doesn't match footprint pads
** End of Report **
Reference in New Issue View Git Blame Copy Permalink