155 KiB
155 KiB
| 1 | tool | idx | type | severity | message | x_mm | y_mm | item/refs | net | actual_width_mm | rule | seg_length_mm | layer | classification | justification |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | ERC | 1 | no_connect_connected | warning | A pin with a "no connection" flag is connected | 31.75 | 163.83 | R31 | /I2C_SDA | needs-fix-cosmetic | NC flag on a connected pin (U16.37/38 USART6, U10.13/14 I2C); nets are connected in the netlist; remove the stray flags so ERC stays meaningful | ||||
| 3 | ERC | 2 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 47.3 | 401.65 | U26 C158 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 4 | ERC | 3 | pin_to_pin | warning | Pins of type Unspecified and Bidirectional are connected | 47.3 | 404.19 | U26 U3 | /I2C_SDA | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 5 | ERC | 4 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 47.3 | 406.73 | U26 C158 | /3V3 | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 6 | ERC | 5 | pin_to_pin | warning | Pins of type Unspecified and Bidirectional are connected | 47.3 | 411.81 | U26 U16 | /ACC_INT1 | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 7 | ERC | 6 | unconnected_wire_endpoint | warning | Unconnected wire endpoint | 50.8 | 25.4 | P1 | needs-fix-cosmetic | dangling wire stub at a pin that is connected by another wire (P1.4=GND, R52.2=GND in netlist); delete stub | |||||
| 8 | ERC | 7 | lib_symbol_mismatch | warning | Symbol 'Fuse_CER' doesn't match copy in library 'Drogheda-sym' | 55.0 | 345.0 | F2 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 9 | ERC | 8 | lib_symbol_issues | warning | Symbol 'Q_PMOS_GDS' not found in symbol library 'Device' | 72.0 | 345.0 | Q23 | needs-fix-cosmetic | symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable | |||||
| 10 | ERC | 9 | pin_to_pin | warning | Pins of type Unspecified and Input are connected | 72.7 | 401.65 | U26 U3 | /I2C_SCL | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 11 | ERC | 10 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 72.7 | 406.73 | U26 U26 | /3V3 | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 12 | ERC | 11 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 72.7 | 409.27 | U26 U26 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 13 | ERC | 12 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 72.7 | 411.81 | U26 C158 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 14 | ERC | 13 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 72.7 | 414.35 | U26 C158 | /3V3 | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 15 | ERC | 14 | lib_symbol_issues | warning | Symbol 'D_Zener_ANK' not found in symbol library 'Device' | 81.28 | 100.33 | DzG1 | needs-fix-cosmetic | symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable | |||||
| 16 | ERC | 15 | lib_symbol_issues | warning | Symbol 'Q_PMOS_GDS' not found in symbol library 'Device' | 83.82 | 115.57 | Q10 | needs-fix-cosmetic | symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable | |||||
| 17 | ERC | 16 | lib_symbol_issues | warning | Symbol 'D_Zener_ANK' not found in symbol library 'Device' | 92.0 | 352.0 | D33 | needs-fix-cosmetic | symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable | |||||
| 18 | ERC | 17 | lib_symbol_mismatch | warning | Symbol 'TPS54360B' doesn't match copy in library 'Drogheda-sym' | 145.0 | 348.0 | U25 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 19 | ERC | 18 | lib_symbol_mismatch | warning | Symbol 'L' doesn't match copy in library 'Device' | 152.4 | 228.6 | L2 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 20 | ERC | 19 | lib_symbol_mismatch | warning | Symbol 'L' doesn't match copy in library 'Device' | 174.0 | 348.0 | L22 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 21 | ERC | 20 | unconnected_wire_endpoint | warning | Unconnected wire endpoint | 201.676 | 216.408 | R52 | needs-fix-cosmetic | dangling wire stub at a pin that is connected by another wire (P1.4=GND, R52.2=GND in netlist); delete stub | |||||
| 22 | ERC | 21 | lib_symbol_issues | warning | Symbol 'Q_NMOS_GSD' not found in symbol library 'Device' | 205.74 | 121.92 | Q2 | needs-fix-cosmetic | symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable | |||||
| 23 | ERC | 22 | lib_symbol_issues | warning | Symbol 'Q_PMOS_GSD' not found in symbol library 'Device' | 214.63 | 80.01 | Q1 | needs-fix-cosmetic | symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable | |||||
| 24 | ERC | 23 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 234.92 | 293.0 | D21 D20 | /VIN_MODEM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 25 | ERC | 24 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 241.03 | 381.19 | U23 C137 | /1V8_MODEM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 26 | ERC | 25 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 241.03 | 383.73 | U23 U19 | /DIN_4G_M | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 27 | ERC | 26 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 241.03 | 388.81 | U23 C137 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 28 | ERC | 27 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 241.03 | 404.19 | U24 C139 | /1V8_MODEM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 29 | ERC | 28 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 241.03 | 406.73 | U24 U19 | /DOUT_4G_M | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 30 | ERC | 29 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 241.03 | 409.27 | U24 U19 | /MODEM_STATUS_M | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 31 | ERC | 30 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 241.03 | 411.81 | U24 C139 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 32 | ERC | 31 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 245.08 | 293.0 | D21 JP4 | /MAIN5V | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 33 | ERC | 32 | lib_symbol_issues | warning | Symbol 'Q_NMOS_GSD' not found in symbol library 'Device' | 246.0 | 330.0 | Q20 | needs-fix-cosmetic | symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable | |||||
| 34 | ERC | 33 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 249.3 | 297.46 | U20 C129 | /BST_MODEM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 35 | ERC | 34 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 249.3 | 300.0 | U20 D21 | /VIN_MODEM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 36 | ERC | 35 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 249.3 | 302.54 | U20 R113 | /MODEM_PWR_EN | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 37 | ERC | 36 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 249.3 | 305.08 | U20 R117 | /RT_MODEM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 38 | ERC | 37 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 262.0 | 292.38 | U20 C128 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 39 | ERC | 38 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 268.97 | 381.19 | U23 C138 | /3V3 | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 40 | ERC | 39 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 268.97 | 383.73 | U23 R108 | /DIN_4G | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 41 | ERC | 40 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 268.97 | 386.27 | U23 U23 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 42 | ERC | 41 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 268.97 | 388.81 | U23 C138 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 43 | ERC | 42 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 268.97 | 404.19 | U24 C140 | /3V3 | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 44 | ERC | 43 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 268.97 | 406.73 | U24 R107 | /DOUT_4G | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 45 | ERC | 44 | pin_to_pin | warning | Pins of type Unspecified and Bidirectional are connected | 268.97 | 409.27 | U24 U16 | /MODEM_STATUS | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 46 | ERC | 45 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 268.97 | 411.81 | U24 C139 | /1V8_MODEM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 47 | ERC | 46 | lib_symbol_issues | warning | Symbol 'Q_NMOS_GSD' not found in symbol library 'Device' | 270.0 | 330.0 | Q21 | needs-fix-cosmetic | symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable | |||||
| 48 | ERC | 47 | lib_symbol_issues | warning | Symbol 'Q_NMOS_GSD' not found in symbol library 'Device' | 271.78 | 104.14 | Q4 | needs-fix-cosmetic | symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable | |||||
| 49 | ERC | 48 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 274.7 | 297.46 | U20 C129 | /SW_MODEM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 50 | ERC | 49 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 274.7 | 300.0 | U20 R113 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 51 | ERC | 50 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 274.7 | 302.54 | U20 C142 | /COMP_MODEM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 52 | ERC | 51 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 274.7 | 305.08 | U20 R110 | /FB_MODEM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 53 | ERC | 52 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 294.92 | 370.0 | D22 C130 | /VBAT_MODEM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 54 | ERC | 53 | lib_symbol_mismatch | warning | Symbol 'SW_Push' doesn't match copy in library 'Switch' | 300.0 | 110.0 | SW1 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 55 | ERC | 54 | lib_symbol_mismatch | warning | Symbol 'L' doesn't match copy in library 'Device' | 300.0 | 300.0 | L20 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 56 | ERC | 55 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.08 | 370.0 | D22 C130 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 57 | ERC | 56 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.87 | 252.53 | U19 Q20 | /MODEM_PWRKEY_M | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 58 | ERC | 57 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.87 | 255.07 | U19 C147 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 59 | ERC | 58 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.87 | 265.23 | U19 TP8 | /MODEM_BOOT | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 60 | ERC | 59 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.87 | 272.85 | U19 R107 | /DOUT_4G_M | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 61 | ERC | 60 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.87 | 275.39 | U19 R108 | /DIN_4G_M | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 62 | ERC | 61 | pin_to_pin | warning | Pins of type Unspecified and Power output are connected | 305.87 | 288.09 | U19 PF17 | /1V8_MODEM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 63 | ERC | 62 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.87 | 290.63 | U19 Q21 | /MODEM_RST_M | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 64 | ERC | 63 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.87 | 293.17 | U19 R111 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 65 | ERC | 64 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 305.87 | 295.71 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 66 | ERC | 65 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.87 | 310.95 | U19 J9 | /USB_VBUS | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 67 | ERC | 66 | pin_to_pin | warning | Pins of type Unspecified and Bidirectional are connected | 305.87 | 318.57 | U19 J9 | /USB_DP | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 68 | ERC | 67 | pin_to_pin | warning | Pins of type Unspecified and Bidirectional are connected | 305.87 | 321.11 | U19 J9 | /USB_DM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 69 | ERC | 68 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.87 | 323.65 | U19 R111 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 70 | ERC | 69 | pin_to_pin | warning | Pins of type Unspecified and Power output are connected | 305.87 | 326.19 | U19 PF18 | /SIM_VDD | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 71 | ERC | 70 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.87 | 328.73 | U19 D23 | /SIM_DATA | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 72 | ERC | 71 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.87 | 331.27 | U19 R129 | /SIM_CLK | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 73 | ERC | 72 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.87 | 333.81 | U19 R128 | /SIM_RST | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 74 | ERC | 73 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 305.87 | 349.05 | U19 D22 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 75 | ERC | 74 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 305.87 | 364.29 | U19 D22 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 76 | ERC | 75 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 305.87 | 366.83 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 77 | ERC | 76 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.87 | 382.07 | U19 R109 | /NETLIGHT_1V8 | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 78 | ERC | 77 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.87 | 387.15 | U19 C130 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 79 | ERC | 78 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 305.87 | 389.69 | U19 D22 | /VBAT_MODEM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 80 | ERC | 79 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 305.87 | 392.23 | U19 U19 | /VBAT_MODEM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 81 | ERC | 80 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 305.87 | 394.77 | U19 U19 | /VBAT_MODEM | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 82 | ERC | 81 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 305.87 | 397.31 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 83 | ERC | 82 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 305.87 | 399.85 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 84 | ERC | 83 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 305.87 | 402.39 | U19 R118 | /RF_LTE | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 85 | ERC | 84 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 305.87 | 404.93 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 86 | ERC | 85 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 305.87 | 407.47 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 87 | ERC | 86 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 317.3 | 259.46 | J13 C147 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 88 | ERC | 87 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 330.0 | 267.08 | J13 D28 | /RF_ANT_LTE | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 89 | ERC | 88 | lib_symbol_mismatch | warning | Symbol 'L' doesn't match copy in library 'Device' | 330.2 | 166.116 | L6 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 90 | ERC | 89 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 338.92 | 262.0 | D28 C147 | /RF_ANT_LTE | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 91 | ERC | 90 | lib_symbol_mismatch | warning | Symbol 'NANOSIM_JAE' doesn't match copy in library 'Drogheda-sym' | 340.0 | 485.0 | J14 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 92 | ERC | 91 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 342.7 | 259.46 | J13 D28 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 93 | ERC | 92 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 349.08 | 262.0 | D28 C24 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 94 | ERC | 93 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 328.73 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 95 | ERC | 94 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 333.81 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 96 | ERC | 95 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 336.35 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 97 | ERC | 96 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 341.43 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 98 | ERC | 97 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 343.97 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 99 | ERC | 98 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 346.51 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 100 | ERC | 99 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 349.05 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 101 | ERC | 100 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 351.59 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 102 | ERC | 101 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 354.13 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 103 | ERC | 102 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 356.67 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 104 | ERC | 103 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 359.21 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 105 | ERC | 104 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 361.75 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 106 | ERC | 105 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 364.29 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 107 | ERC | 106 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 366.83 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 108 | ERC | 107 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 369.37 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 109 | ERC | 108 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 351.59 | 371.91 | U19 C136 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 110 | ERC | 109 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 351.59 | 374.45 | U19 C136 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 111 | ERC | 110 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 376.99 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 112 | ERC | 111 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 379.53 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 113 | ERC | 112 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 382.07 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 114 | ERC | 113 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 384.61 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 115 | ERC | 114 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 387.15 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 116 | ERC | 115 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 389.69 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 117 | ERC | 116 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 392.23 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 118 | ERC | 117 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 402.39 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 119 | ERC | 118 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 351.59 | 404.93 | U19 U19 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 120 | ERC | 119 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 351.59 | 407.47 | U19 C136 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 121 | ERC | 120 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 387.3 | 152.46 | J12 C123 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 122 | ERC | 121 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 400.0 | 160.08 | J12 D27 | /RF_ANT_GNSS | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 123 | ERC | 122 | lib_symbol_mismatch | warning | Symbol 'MFF2_SIM' doesn't match copy in library 'Drogheda-sym' | 400.0 | 340.0 | U22 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 124 | ERC | 123 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 400.92 | 165.0 | D27 L21 | /RF_ANT_GNSS | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 125 | ERC | 124 | pin_to_pin | warning | Pins of type Unspecified and Passive are connected | 411.08 | 165.0 | D27 C144 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 126 | ERC | 125 | pin_to_pin | warning | Pins of type Unspecified and Unspecified are connected | 412.7 | 152.46 | J12 D27 | GND | pre-existing-benign | easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS) | ||||
| 127 | ERC | 126 | lib_symbol_mismatch | warning | Symbol 'L' doesn't match copy in library 'Device' | 424.0 | 160.0 | L21 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 128 | ERC | 127 | lib_symbol_mismatch | warning | Symbol 'SW_Push' doesn't match copy in library 'Switch' | 436.88 | 502.92 | SW2 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 129 | ERC | 128 | lib_symbol_mismatch | warning | Symbol 'Crystal' doesn't match copy in library 'Device' | 436.88 | 530.86 | Y3 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 130 | ERC | 129 | lib_symbol_mismatch | warning | Symbol 'AO4406A' doesn't match copy in library 'Drogheda-sym' | 447.04 | 230.886 | Q7 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 131 | ERC | 130 | no_connect_dangling | warning | Unconnected "no connection" flag | 453.898 | 99.568 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 132 | ERC | 131 | no_connect_dangling | warning | Unconnected "no connection" flag | 453.898 | 102.108 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 133 | ERC | 132 | no_connect_dangling | warning | Unconnected "no connection" flag | 453.898 | 104.648 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 134 | ERC | 133 | no_connect_dangling | warning | Unconnected "no connection" flag | 453.898 | 107.188 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 135 | ERC | 134 | no_connect_dangling | warning | Unconnected "no connection" flag | 453.898 | 109.728 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 136 | ERC | 135 | no_connect_dangling | warning | Unconnected "no connection" flag | 453.898 | 112.268 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 137 | ERC | 136 | no_connect_dangling | warning | Unconnected "no connection" flag | 453.898 | 114.808 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 138 | ERC | 137 | no_connect_dangling | warning | Unconnected "no connection" flag | 453.898 | 117.348 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 139 | ERC | 138 | no_connect_dangling | warning | Unconnected "no connection" flag | 453.898 | 119.888 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 140 | ERC | 139 | no_connect_dangling | warning | Unconnected "no connection" flag | 453.898 | 122.428 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 141 | ERC | 140 | no_connect_dangling | warning | Unconnected "no connection" flag | 453.898 | 124.968 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 142 | ERC | 141 | no_connect_dangling | warning | Unconnected "no connection" flag | 453.898 | 127.508 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 143 | ERC | 142 | no_connect_dangling | warning | Unconnected "no connection" flag | 453.898 | 130.048 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 144 | ERC | 143 | lib_symbol_mismatch | warning | Symbol 'Crystal' doesn't match copy in library 'Device' | 474.98 | 530.86 | Y4 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 145 | ERC | 144 | no_connect_dangling | warning | Unconnected "no connection" flag | 484.378 | 89.408 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 146 | ERC | 145 | no_connect_dangling | warning | Unconnected "no connection" flag | 484.378 | 91.948 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 147 | ERC | 146 | no_connect_dangling | warning | Unconnected "no connection" flag | 484.378 | 97.028 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 148 | ERC | 147 | no_connect_dangling | warning | Unconnected "no connection" flag | 484.378 | 107.188 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 149 | ERC | 148 | no_connect_dangling | warning | Unconnected "no connection" flag | 484.378 | 109.728 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 150 | ERC | 149 | no_connect_dangling | warning | Unconnected "no connection" flag | 484.378 | 112.268 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 151 | ERC | 150 | no_connect_dangling | warning | Unconnected "no connection" flag | 484.378 | 114.808 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 152 | ERC | 151 | no_connect_dangling | warning | Unconnected "no connection" flag | 484.378 | 117.348 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 153 | ERC | 152 | no_connect_dangling | warning | Unconnected "no connection" flag | 484.378 | 119.888 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 154 | ERC | 153 | no_connect_dangling | warning | Unconnected "no connection" flag | 484.378 | 124.968 | needs-fix-cosmetic | orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete | ||||||
| 155 | ERC | 154 | lib_symbol_mismatch | warning | Symbol 'STM32F411RETx' doesn't match copy in library 'MCU_ST_STM32F4' | 500.38 | 434.34 | U16 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 156 | ERC | 155 | no_connect_connected | warning | A pin with a "no connection" flag is connected | 513.588 | 182.372 | K1 | /USART6_TX | needs-fix-cosmetic | NC flag on a connected pin (U16.37/38 USART6, U10.13/14 I2C); nets are connected in the netlist; remove the stray flags so ERC stays meaningful | ||||
| 157 | ERC | 156 | lib_symbol_mismatch | warning | Symbol 'D' doesn't match copy in library 'Device' | 519.968 | 202.992 | D6 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 158 | ERC | 157 | lib_symbol_mismatch | warning | Symbol 'Crystal' doesn't match copy in library 'Device' | 539.75 | 167.64 | Y2 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 159 | ERC | 158 | lib_symbol_issues | warning | Symbol 'PCF8574' not found in symbol library 'Interface_Expansion' | 565.15 | 59.69 | U13 | needs-fix-cosmetic | symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable | |||||
| 160 | ERC | 159 | lib_symbol_mismatch | warning | Symbol 'SP3485EN' doesn't match copy in library 'Interface_UART' | 609.6 | 139.7 | U14 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 161 | ERC | 160 | footprint_link_issues | warning | Footprint 'PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Vertical' not found in library 'Connector_Phoenix_MC' | 650.24 | 139.7 | P11 | real | P11/P12 schematic fp = Vertical (not in lib) while PCB + LCSC C5160226 are right-angle/Horizontal; J10 lib nickname Connector_RJ45 not configured. An Update-PCB would swap/flip these (DNP too) | |||||
| 162 | ERC | 161 | footprint_link_issues | warning | Footprint 'PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Vertical' not found in library 'Connector_Phoenix_MC' | 650.24 | 204.47 | P12 | real | P11/P12 schematic fp = Vertical (not in lib) while PCB + LCSC C5160226 are right-angle/Horizontal; J10 lib nickname Connector_RJ45 not configured. An Update-PCB would swap/flip these (DNP too) | |||||
| 163 | ERC | 162 | lib_symbol_mismatch | warning | Symbol 'AMS1117-3.3' doesn't match copy in library 'Regulator_Linear' | 665.48 | 502.92 | U17 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 164 | ERC | 163 | lib_symbol_mismatch | warning | Symbol 'Crystal' doesn't match copy in library 'Device' | 694.69 | 175.26 | Y1 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 165 | ERC | 164 | lib_symbol_mismatch | warning | Symbol 'L' doesn't match copy in library 'Device' | 722.63 | 222.25 | L8 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 166 | ERC | 165 | lib_symbol_mismatch | warning | Symbol 'RJ45_Hanrun_HR911105A_Horizontal' doesn't match copy in library 'Connector' | 800.1 | 90.17 | J10 | pre-existing-benign | embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update | |||||
| 167 | ERC | 166 | footprint_link_issues | warning | The current configuration does not include the footprint library 'Connector_RJ45' | 800.1 | 90.17 | J10 | real | P11/P12 schematic fp = Vertical (not in lib) while PCB + LCSC C5160226 are right-angle/Horizontal; J10 lib nickname Connector_RJ45 not configured. An Update-PCB would swap/flip these (DNP too) | |||||
| 168 | DRC | 1 | silk_edge_clearance | warning | Silkscreen clipped by board edge | 200.1917 | 140.3231 | Segment on Edge.Cuts | board setup constraints silk | needs-fix-cosmetic | silkscreen legibility; JLC clips silk on pads/edge automatically | ||||
| 169 | DRC | 2 | lib_footprint_issues | warning | Footprint 'MountingHole_3.2mm' not found in library 'MountingHole' | 195.2 | 135.3 | Footprint MH8 | Local override | needs-fix-cosmetic | MountingHole library nickname not in fp-lib-table; board-only MH5-8 are fine for fab | ||||
| 170 | DRC | 3 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 116.7 | 97.0 | Footprint C81 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 171 | DRC | 4 | lib_footprint_mismatch | warning | Footprint 'C_0805_2012Metric' does not match copy in library 'Capacitor_SMD' | 83.75 | 53.45 | Footprint C102 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 172 | DRC | 5 | lib_footprint_mismatch | warning | Footprint 'JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical' does not match copy in library 'Connector_JST' | 196.0 | 110.5 | Footprint P3 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 173 | DRC | 6 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 94.5 | 61.275 | Footprint C92 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 174 | DRC | 7 | lib_footprint_mismatch | warning | Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST' | 100.25 | 44.0 | Footprint P6 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 175 | DRC | 8 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 101.5 | 57.5 | Footprint C93 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 176 | DRC | 9 | lib_footprint_mismatch | warning | Footprint 'LQFP-64_10x10mm_P0.5mm' does not match copy in library 'Package_QFP' | 120.7 | 67.425 | Footprint U16 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 177 | DRC | 10 | lib_footprint_mismatch | warning | Footprint 'LQFP-48_7x7mm_P0.5mm' does not match copy in library 'Package_QFP' | 95.1625 | 53.83 | Footprint U11 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 178 | DRC | 11 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 86.675 | 50.5 | Footprint R93 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 179 | DRC | 12 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 92.5 | 61.275 | Footprint C98 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 180 | DRC | 13 | lib_footprint_mismatch | warning | Footprint 'SOT-223-3_TabPin2' does not match copy in library 'Package_TO_SOT_SMD' | 92.5 | 80.0 | Footprint U17 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 181 | DRC | 14 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 86.0 | 82.265 | Footprint R85 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 182 | DRC | 15 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 116.3 | 58.25 | Footprint C111 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 183 | DRC | 16 | lib_footprint_mismatch | warning | Footprint 'Crystal_SMD_3215-2Pin_3.2x1.5mm' does not match copy in library 'Crystal' | 132.05 | 73.5 | Footprint Y4 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 184 | DRC | 17 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 139.975 | 68.175 | Footprint C113 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 185 | DRC | 18 | lib_footprint_mismatch | warning | Footprint 'D_SOD-323' does not match copy in library 'Diode_SMD' | 73.15 | 69.0 | Footprint D15 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 186 | DRC | 19 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 128.3 | 73.25 | Footprint C110 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 187 | DRC | 20 | lib_footprint_mismatch | warning | Footprint 'C_0805_2012Metric' does not match copy in library 'Capacitor_SMD' | 102.375 | 62.945 | Footprint C91 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 188 | DRC | 21 | lib_footprint_mismatch | warning | Footprint 'SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm' does not match copy in library 'Jumper' | 138.4 | 127.5 | Footprint JP5 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 189 | DRC | 22 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 106.17 | 68.25 | Footprint R87 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 190 | DRC | 23 | lib_footprint_mismatch | warning | Footprint 'PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Horizontal' does not match copy in library 'Connector_Phoenix_MC' | 135.48 | 131.5675 | Footprint P11 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 191 | DRC | 24 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 133.55 | 70.75 | Footprint C116 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 192 | DRC | 25 | lib_footprint_mismatch | warning | Footprint 'Crystal_SMD_HC49-SD' does not match copy in library 'Crystal' | 136.475 | 62.925 | Footprint Y3 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 193 | DRC | 26 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 117.7 | 124.5 | Footprint C80 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 194 | DRC | 27 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 113.675 | 106.25 | Footprint C86 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 195 | DRC | 28 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 130.275 | 61.7796 | Footprint C112 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 196 | DRC | 29 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 86.675 | 48.5 | Footprint R84 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 197 | DRC | 30 | lib_footprint_mismatch | warning | Footprint 'D_SOD-323' does not match copy in library 'Diode_SMD' | 72.5 | 77.0 | Footprint D16 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 198 | DRC | 31 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 86.675 | 54.5 | Footprint R95 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 199 | DRC | 32 | lib_footprint_mismatch | warning | Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity' | 122.375 | 77.3 | Footprint U3 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 200 | DRC | 33 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 78.25 | 76.75 | Footprint R86 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 201 | DRC | 34 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 83.5 | 57.5 | Footprint R97 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 202 | DRC | 35 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 86.0 | 80.0 | Footprint R88 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 203 | DRC | 36 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 116.7 | 90.475 | Footprint C82 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 204 | DRC | 37 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 139.975 | 57.675 | Footprint C114 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 205 | DRC | 38 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 114.2 | 115.25 | Footprint R90 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 206 | DRC | 39 | lib_footprint_mismatch | warning | Footprint 'C_0805_2012Metric' does not match copy in library 'Capacitor_SMD' | 83.75 | 48.95 | Footprint C94 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 207 | DRC | 40 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 136.15 | 127.67 | Footprint R82 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 208 | DRC | 41 | lib_footprint_mismatch | warning | Footprint 'PinHeader_1x04_P2.54mm_Vertical' does not match copy in library 'Connector_PinHeader_2.54mm' | 72.45 | 135.75 | Footprint H4 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 209 | DRC | 42 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 86.675 | 58.5 | Footprint C97 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 210 | DRC | 43 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 126.375 | 76.85 | Footprint R81 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 211 | DRC | 44 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 128.95 | 101.775 | Footprint C89 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 212 | DRC | 45 | lib_footprint_mismatch | warning | Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST' | 119.25 | 43.965 | Footprint P9 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 213 | DRC | 46 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 130.05 | 70.75 | Footprint C115 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 214 | DRC | 47 | lib_footprint_issues | warning | Footprint 'MountingHole_3.2mm' not found in library 'MountingHole' | 65.2 | 45.3 | Footprint MH5 | Local override | needs-fix-cosmetic | MountingHole library nickname not in fp-lib-table; board-only MH5-8 are fine for fab | ||||
| 215 | DRC | 48 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 113.775 | 59.0 | Footprint C105 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 216 | DRC | 49 | lib_footprint_mismatch | warning | Footprint 'C_0805_2012Metric' does not match copy in library 'Capacitor_SMD' | 78.5 | 73.05 | Footprint C101 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 217 | DRC | 50 | lib_footprint_mismatch | warning | Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoen | 167.5 | 135.0 | Footprint P1 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 218 | DRC | 51 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 116.7 | 93.725 | Footprint C83 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 219 | DRC | 52 | lib_footprint_mismatch | warning | Footprint 'SOIC-8_3.9x4.9mm_P1.27mm' does not match copy in library 'Package_SO' | 122.025 | 84.9663 | Footprint U14 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 220 | DRC | 53 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 126.75 | 83.8512 | Footprint C84 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 221 | DRC | 54 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 113.675 | 108.25 | Footprint C88 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 222 | DRC | 55 | lib_footprint_issues | warning | Footprint 'MountingHole_3.2mm' not found in library 'MountingHole' | 195.2 | 45.3 | Footprint MH7 | Local override | needs-fix-cosmetic | MountingHole library nickname not in fp-lib-table; board-only MH5-8 are fine for fab | ||||
| 223 | DRC | 56 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 126.025 | 59.0 | Footprint C106 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 224 | DRC | 57 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 116.7 | 87.0 | Footprint R80 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 225 | DRC | 58 | lib_footprint_mismatch | warning | Footprint 'LED_0603_1608Metric' does not match copy in library 'LED_SMD' | 132.6375 | 80.8171 | Footprint D18 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 226 | DRC | 59 | lib_footprint_mismatch | warning | Footprint 'LED_0603_1608Metric' does not match copy in library 'LED_SMD' | 132.5875 | 75.8171 | Footprint D17 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 227 | DRC | 60 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 114.2 | 113.5 | Footprint R89 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 228 | DRC | 61 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 112.45 | 102.975 | Footprint C85 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 229 | DRC | 62 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 83.5 | 65.275 | Footprint C95 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 230 | DRC | 63 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 114.2 | 117.0 | Footprint R91 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 231 | DRC | 64 | lib_footprint_mismatch | warning | Footprint 'SOIC-16W_7.5x10.3mm_P1.27mm' does not match copy in library 'Package_SO' | 122.2 | 118.0 | Footprint U13 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 232 | DRC | 65 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 114.45 | 102.975 | Footprint C87 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 233 | DRC | 66 | lib_footprint_mismatch | warning | Footprint 'C_0805_2012Metric' does not match copy in library 'Capacitor_SMD' | 85.5 | 85.5 | Footprint C117 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 234 | DRC | 67 | lib_footprint_mismatch | warning | Footprint 'Crystal_SMD_HC49-SD' does not match copy in library 'Crystal' | 113.15 | 91.9013 | Footprint Y2 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 235 | DRC | 68 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 113.0 | 72.5 | Footprint C107 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 236 | DRC | 69 | lib_footprint_mismatch | warning | Footprint 'Crystal_SMD_HC49-SD' does not match copy in library 'Crystal' | 91.5 | 65.5 | Footprint Y1 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 237 | DRC | 70 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 104.5 | 62.725 | Footprint C96 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 238 | DRC | 71 | lib_footprint_issues | warning | Footprint 'MountingHole_3.2mm' not found in library 'MountingHole' | 65.2 | 135.3 | Footprint MH6 | Local override | needs-fix-cosmetic | MountingHole library nickname not in fp-lib-table; board-only MH5-8 are fine for fab | ||||
| 239 | DRC | 72 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 83.5 | 61.325 | Footprint R96 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 240 | DRC | 73 | lib_footprint_mismatch | warning | Footprint 'C_0805_2012Metric' does not match copy in library 'Capacitor_SMD' | 88.0 | 85.5 | Footprint C118 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 241 | DRC | 74 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 86.675 | 56.5 | Footprint R94 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 242 | DRC | 75 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 130.275 | 67.25 | Footprint C104 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 243 | DRC | 76 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 86.675 | 52.5 | Footprint R92 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 244 | DRC | 77 | lib_footprint_mismatch | warning | Footprint 'C_0805_2012Metric' does not match copy in library 'Capacitor_SMD' | 100.0 | 62.945 | Footprint C90 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 245 | DRC | 78 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 130.275 | 65.25 | Footprint C109 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 246 | DRC | 79 | lib_footprint_mismatch | warning | Footprint 'D_SOD-323' does not match copy in library 'Diode_SMD' | 72.5 | 72.5 | Footprint D14 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 247 | DRC | 80 | lib_footprint_mismatch | warning | Footprint 'TSSOP-28_4.4x9.7mm_P0.65mm' does not match copy in library 'Package_SO' | 122.3875 | 93.9762 | Footprint U10 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 248 | DRC | 81 | lib_footprint_mismatch | warning | Footprint 'SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm' does not match copy in library 'Package_SO' | 84.0 | 76.35 | Footprint U12 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 249 | DRC | 82 | lib_footprint_mismatch | warning | Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST' | 115.7 | 136.5 | Footprint P10 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 250 | DRC | 83 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 75.825 | 77.5 | Footprint C99 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 251 | DRC | 84 | lib_footprint_mismatch | warning | Footprint 'PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Horizontal' does not match copy in library 'Connector_Phoenix_MC' | 122.155 | 131.5675 | Footprint P12 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 252 | DRC | 85 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 84.3 | 72.75 | Footprint C100 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 253 | DRC | 86 | lib_footprint_mismatch | warning | Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD' | 128.3 | 76.45 | Footprint C108 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 254 | DRC | 87 | lib_footprint_mismatch | warning | Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD' | 86.675 | 60.5 | Footprint R83 | Local override | pre-existing-benign | board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT "update footprints from library" (would swap P11/P12, reset pads) | ||||
| 255 | DRC | 88 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm) | 176.6 | 45.3 | Track [/SYS5V] on F.Cu, length 2.8850 mm | /SYS5V | 0.8 | T15 power width: PWR_HI >= 1.0 mm | 2.89 | F.Cu | pre-existing-benign | 0.8 mm F.Cu capacity 2.03 A >= est. 0.6 A (U12+U17+K1+F9P rail: ~0.1+0.2+0.03+0.15 A); T15 rule over-strict for this net |
| 256 | DRC | 89 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 88.215 | 75.715 | Track [/SYS5V] on F.Cu, length 0.0495 mm | /SYS5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.05 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.6 A (U12+U17+K1+F9P rail: ~0.1+0.2+0.03+0.15 A); T15 rule over-strict for this net |
| 257 | DRC | 90 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 176.4 | 45.5 | Track [/SYS5V] on F.Cu, length 0.2828 mm | /SYS5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.28 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.6 A (U12+U17+K1+F9P rail: ~0.1+0.2+0.03+0.15 A); T15 rule over-strict for this net |
| 258 | DRC | 91 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm) | 175.5 | 46.4 | Track [/SYS5V] on F.Cu, length 1.2728 mm | /SYS5V | 0.8 | T15 power width: PWR_HI >= 1.0 mm | 1.27 | F.Cu | pre-existing-benign | 0.8 mm F.Cu capacity 2.03 A >= est. 0.6 A (U12+U17+K1+F9P rail: ~0.1+0.2+0.03+0.15 A); T15 rule over-strict for this net |
| 259 | DRC | 92 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 181.0825 | 46.8975 | Track [/SYS5V] on F.Cu, length 0.2600 mm | /SYS5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.26 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.6 A (U12+U17+K1+F9P rail: ~0.1+0.2+0.03+0.15 A); T15 rule over-strict for this net |
| 260 | DRC | 93 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm) | 179.485 | 45.3 | Track [/SYS5V] on F.Cu, length 2.2592 mm | /SYS5V | 0.8 | T15 power width: PWR_HI >= 1.0 mm | 2.89 | F.Cu | pre-existing-benign | 0.8 mm F.Cu capacity 2.03 A >= est. 0.6 A (U12+U17+K1+F9P rail: ~0.1+0.2+0.03+0.15 A); T15 rule over-strict for this net |
| 261 | DRC | 94 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 136.25 | 98.765 | Track [/SW_FAN] on F.Cu, length 1.0150 mm | /SW_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 1.02 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net |
| 262 | DRC | 95 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 144.75 | 93.25 | Track [/SW_FAN] on F.Cu, length 3.1820 mm | /SW_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 3.18 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net |
| 263 | DRC | 96 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 138.12 | 99.92 | Track [/SW_FAN] on F.Cu, length 2.3052 mm | /SW_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 2.31 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net |
| 264 | DRC | 97 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 137.405 | 99.92 | Track [/SW_FAN] on F.Cu, length 1.6334 mm | /SW_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 1.63 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net |
| 265 | DRC | 98 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 136.25 | 97.75 | Track [/SW_FAN] on F.Cu, length 6.3640 mm | /SW_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 1.02 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net |
| 266 | DRC | 99 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 137.405 | 99.92 | Track [/SW_FAN] on F.Cu, length 0.7150 mm | /SW_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 1.63 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net |
| 267 | DRC | 100 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 147.0 | 95.5 | Track [/SW_FAN] on F.Cu, length 1.7450 mm | /SW_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 3.18 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net |
| 268 | DRC | 101 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 140.75 | 93.25 | Track [/SW_FAN] on F.Cu, length 4.0000 mm | /SW_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 6.36 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net |
| 269 | DRC | 102 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 93.2375 | 54.58 | Track [/3V3_ETH] on F.Cu, length 0.0177 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 2.14 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 270 | DRC | 103 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 79.25 | 56.335 | Track [/3V3_ETH] on F.Cu, length 1.8243 mm | /3V3_ETH | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 1.82 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 271 | DRC | 104 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 83.5 | 56.675 | Track [/3V3_ETH] on F.Cu, length 1.4142 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 1.41 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 272 | DRC | 105 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 94.4125 | 60.4125 | Track [/3V3_ETH] on F.Cu, length 2.4200 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 2.42 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 273 | DRC | 106 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 92.5 | 60.5 | Track [/3V3_ETH] on F.Cu, length 2.0000 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 2.0 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 274 | DRC | 107 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 84.5 | 59.5 | Track [/3V3_ETH] on F.Cu, length 1.4142 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 1.41 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 275 | DRC | 108 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 99.325 | 55.08 | Track [/3V3_ETH] on F.Cu, length 2.7699 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 2.77 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 276 | DRC | 109 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 84.5 | 57.675 | Track [/3V3_ETH] on F.Cu, length 1.8250 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 1.41 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 277 | DRC | 110 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 85.15 | 54.8086 | Track [/3V3_ETH] on F.Cu, length 1.6086 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 1.61 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 278 | DRC | 111 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 96.4125 | 57.2226 | Track [/3V3_ETH] on F.Cu, length 0.7699 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 0.77 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 279 | DRC | 112 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 94.4125 | 57.2226 | Track [/3V3_ETH] on F.Cu, length 0.3784 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 0.77 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 280 | DRC | 113 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 94.5 | 60.5 | Track [/3V3_ETH] on F.Cu, length 1.2500 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 2.0 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 281 | DRC | 114 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 83.75 | 48.0 | Track [/3V3_ETH] on F.Cu, length 1.6000 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 1.6 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 282 | DRC | 115 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 93.4125 | 57.9925 | Track [/3V3_ETH] on F.Cu, length 0.7699 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 0.77 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 283 | DRC | 116 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 83.75 | 52.5 | Track [/3V3_ETH] on F.Cu, length 2.1000 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 2.1 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 284 | DRC | 117 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 91.0 | 52.58 | Track [/3V3_ETH] on F.Cu, length 1.5346 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 1.53 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 285 | DRC | 118 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 84.9378 | 55.0208 | Track [/3V3_ETH] on F.Cu, length 0.3001 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 0.22 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 286 | DRC | 119 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 85.15 | 53.2 | Track [/3V3_ETH] on F.Cu, length 0.9899 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 1.61 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 287 | DRC | 120 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 96.1449 | 56.955 | Track [/3V3_ETH] on F.Cu, length 0.3784 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 1.46 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 288 | DRC | 121 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 100.305 | 55.08 | Track [/3V3_ETH] on F.Cu, length 0.9800 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 0.98 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 289 | DRC | 122 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 101.5 | 56.725 | Track [/3V3_ETH] on F.Cu, length 0.4500 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 0.45 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 290 | DRC | 123 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 101.5 | 56.275 | Track [/3V3_ETH] on F.Cu, length 1.6900 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 0.45 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 291 | DRC | 124 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 85.85 | 48.5 | Track [/3V3_ETH] on F.Cu, length 4.0000 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 4.0 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 292 | DRC | 125 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 96.5551 | 55.08 | Track [/3V3_ETH] on F.Cu, length 2.6517 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 2.77 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 293 | DRC | 126 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 88.5723 | 52.58 | Track [/3V3_ETH] on F.Cu, length 0.9475 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 2.43 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 294 | DRC | 127 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 94.5 | 60.5 | Track [/3V3_ETH] on F.Cu, length 0.1237 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 2.0 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 295 | DRC | 128 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 83.5 | 56.675 | Track [/3V3_ETH] on F.Cu, length 2.0334 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 1.41 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 296 | DRC | 129 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 82.55 | 57.625 | Track [/3V3_ETH] on F.Cu, length 1.3435 mm | /3V3_ETH | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 1.34 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 297 | DRC | 130 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 79.4 | 44.0 | Track [/3V3_ETH] on F.Cu, length 0.2121 mm | /3V3_ETH | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 0.21 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 298 | DRC | 131 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 94.4125 | 57.9925 | Track [/3V3_ETH] on F.Cu, length 0.7699 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 0.77 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 299 | DRC | 132 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 85.35 | 48.0 | Track [/3V3_ETH] on F.Cu, length 0.7071 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 1.6 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 300 | DRC | 133 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 86.6 | 53.25 | Track [/3V3_ETH] on F.Cu, length 1.0607 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 1.06 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 301 | DRC | 134 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 93.6801 | 56.955 | Track [/3V3_ETH] on F.Cu, length 1.0000 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 1.0 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 302 | DRC | 135 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 93.4125 | 57.2226 | Track [/3V3_ETH] on F.Cu, length 0.3784 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 0.77 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 303 | DRC | 136 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 91.0 | 54.58 | Track [/3V3_ETH] on F.Cu, length 2.2375 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 2.24 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 304 | DRC | 137 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 84.9378 | 55.2372 | Track [/3V3_ETH] on F.Cu, length 0.2164 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 2.03 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 305 | DRC | 138 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 79.25 | 44.15 | Track [/3V3_ETH] on F.Cu, length 12.1850 mm | /3V3_ETH | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 0.21 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 306 | DRC | 139 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 80.54 | 57.625 | Track [/3V3_ETH] on F.Cu, length 2.0100 mm | /3V3_ETH | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 1.82 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 307 | DRC | 140 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 93.25 | 54.5675 | Track [/3V3_ETH] on F.Cu, length 2.1390 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 0.02 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 308 | DRC | 141 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 93.25 | 53.2954 | Track [/3V3_ETH] on F.Cu, length 1.2721 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 1.01 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 309 | DRC | 142 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 92.5346 | 52.58 | Track [/3V3_ETH] on F.Cu, length 1.0117 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 1.01 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 310 | DRC | 143 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 91.0 | 52.58 | Track [/3V3_ETH] on F.Cu, length 2.4277 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 1.53 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 311 | DRC | 144 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 87.9023 | 53.25 | Track [/3V3_ETH] on F.Cu, length 1.3023 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 0.95 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 312 | DRC | 145 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 94.6801 | 56.955 | Track [/3V3_ETH] on F.Cu, length 1.4648 mm | /3V3_ETH | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 1.46 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 313 | DRC | 146 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm) | 91.7375 | 56.08 | Track [/3V3_ETH] on F.Cu, length 0.7375 mm | /3V3_ETH | 0.25 | T15 power width: PWR_MID >= 0.6 mm | 2.14 | F.Cu | pre-existing-benign | 0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 314 | DRC | 147 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 98.425 | 61.43 | Track [/3V3_ETH] on In1.Cu, length 12.1198 mm | /3V3_ETH | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 12.12 | In1.Cu | pre-existing-benign | 0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 315 | DRC | 148 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 95.75 | 60.5 | Track [/3V3_ETH] on In1.Cu, length 3.7830 mm | /3V3_ETH | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 3.78 | In1.Cu | pre-existing-benign | 0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 316 | DRC | 149 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 98.425 | 57.825 | Track [/3V3_ETH] on In1.Cu, length 3.6050 mm | /3V3_ETH | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 3.78 | In1.Cu | pre-existing-benign | 0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 317 | DRC | 150 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 85.017 | 55.1 | Track [/3V3_ETH] on In1.Cu, length 2.2766 mm | /3V3_ETH | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 0.11 | In1.Cu | pre-existing-benign | 0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 318 | DRC | 151 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 87.2936 | 55.1 | Track [/3V3_ETH] on In1.Cu, length 3.6770 mm | /3V3_ETH | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 2.28 | In1.Cu | pre-existing-benign | 0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 319 | DRC | 152 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 94.75 | 52.5 | Track [/3V3_ETH] on In1.Cu, length 5.1972 mm | /3V3_ETH | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 5.2 | In1.Cu | pre-existing-benign | 0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 320 | DRC | 153 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 98.425 | 56.175 | Track [/3V3_ETH] on In1.Cu, length 1.6500 mm | /3V3_ETH | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 5.2 | In1.Cu | pre-existing-benign | 0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 321 | DRC | 154 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 84.9378 | 55.0208 | Track [/3V3_ETH] on In1.Cu, length 0.1120 mm | /3V3_ETH | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 0.11 | In1.Cu | pre-existing-benign | 0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 322 | DRC | 155 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 89.8936 | 52.5 | Track [/3V3_ETH] on In1.Cu, length 4.8564 mm | /3V3_ETH | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 3.68 | In1.Cu | pre-existing-benign | 0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net |
| 323 | DRC | 156 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm) | 193.4 | 103.6937 | Track [/BAT_PLUS] on F.Cu, length 4.9020 mm | /BAT_PLUS | 0.25 | T15 power width: PWR_HI >= 1.0 mm | 4.9 | F.Cu | real | 0.25 mm F.Cu carries ~3.5 A vs IPC-2221 10C capacity 0.88 A (pack current: backup draw 5V*2.5A/(3.3V*0.9)=4.2 A peak; charge 2.42 A (R50 825R)) |
| 324 | DRC | 157 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 139.0 | 55.9 | Track [/BAT_PLUS] on F.Cu, length 0.2828 mm | /BAT_PLUS | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.28 | F.Cu | real | 0.5 mm F.Cu carries ~3.5 A vs IPC-2221 10C capacity 1.45 A (pack current: backup draw 5V*2.5A/(3.3V*0.9)=4.2 A peak; charge 2.42 A (R50 825R)) |
| 325 | DRC | 158 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm) | 189.9338 | 107.16 | Track [/BAT_PLUS] on F.Cu, length 0.4838 mm | /BAT_PLUS | 0.25 | T15 power width: PWR_HI >= 1.0 mm | 4.9 | F.Cu | real | 0.25 mm F.Cu carries ~3.5 A vs IPC-2221 10C capacity 0.88 A (pack current: backup draw 5V*2.5A/(3.3V*0.9)=4.2 A peak; charge 2.42 A (R50 825R)) |
| 326 | DRC | 159 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 193.4 | 93.2 | Track [/BAT_PLUS] on F.Cu, length 10.4938 mm | /BAT_PLUS | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 10.49 | F.Cu | real | 0.5 mm F.Cu carries ~3.5 A vs IPC-2221 10C capacity 1.45 A (pack current: backup draw 5V*2.5A/(3.3V*0.9)=4.2 A peak; charge 2.42 A (R50 825R)) |
| 327 | DRC | 160 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.2500 mm) | 154.25 | 59.15 | Track [/VBAT_MODEM] on F.Cu, length 0.3536 mm | /VBAT_MODEM | 0.25 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 0.35 | F.Cu | real | 0.25 mm F.Cu carries ~2.0 A vs IPC-2221 10C capacity 0.88 A (A7670SA VBAT burst up to 2 A (GSM TX), LTE ~1 A) |
| 328 | DRC | 161 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.2500 mm) | 154.25 | 59.75 | Track [/VBAT_MODEM] on F.Cu, length 0.6000 mm | /VBAT_MODEM | 0.25 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 0.6 | F.Cu | real | 0.25 mm F.Cu carries ~2.0 A vs IPC-2221 10C capacity 0.88 A (A7670SA VBAT burst up to 2 A (GSM TX), LTE ~1 A) |
| 329 | DRC | 162 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 179.75 | 57.0 | Track [/VBAT_MODEM] on F.Cu, length 0.7071 mm | /VBAT_MODEM | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 0.71 | F.Cu | real | 0.5 mm F.Cu carries ~2.0 A vs IPC-2221 10C capacity 1.45 A (A7670SA VBAT burst up to 2 A (GSM TX), LTE ~1 A) |
| 330 | DRC | 163 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 179.25 | 57.5 | Track [/VBAT_MODEM] on F.Cu, length 2.5000 mm | /VBAT_MODEM | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 0.71 | F.Cu | real | 0.5 mm F.Cu carries ~2.0 A vs IPC-2221 10C capacity 1.45 A (A7670SA VBAT burst up to 2 A (GSM TX), LTE ~1 A) |
| 331 | DRC | 164 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 179.25 | 60.0 | Track [/VBAT_MODEM] on F.Cu, length 2.0000 mm | /VBAT_MODEM | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 2.5 | F.Cu | real | 0.5 mm F.Cu carries ~2.0 A vs IPC-2221 10C capacity 1.45 A (A7670SA VBAT burst up to 2 A (GSM TX), LTE ~1 A) |
| 332 | DRC | 165 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 154.0 | 58.9 | Track [/VBAT_MODEM] on In1.Cu, length 0.6718 mm | /VBAT_MODEM | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 0.67 | In1.Cu | real | 0.5 mm In1.Cu carries ~2.0 A vs IPC-2221 10C capacity 0.72 A (A7670SA VBAT burst up to 2 A (GSM TX), LTE ~1 A) |
| 333 | DRC | 166 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 154.475 | 58.425 | Track [/VBAT_MODEM] on In1.Cu, length 5.6000 mm | /VBAT_MODEM | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 0.67 | In1.Cu | real | 0.5 mm In1.Cu carries ~2.0 A vs IPC-2221 10C capacity 0.72 A (A7670SA VBAT burst up to 2 A (GSM TX), LTE ~1 A) |
| 334 | DRC | 167 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 147.75 | 103.75 | Track [/5V_FAN] on F.Cu, length 0.9899 mm | /5V_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 0.99 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net |
| 335 | DRC | 168 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 160.25 | 104.5 | Track [/5V_FAN] on F.Cu, length 2.0500 mm | /5V_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 2.05 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net |
| 336 | DRC | 169 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 174.275 | 100.975 | Track [/5V_FAN] on F.Cu, length 3.0759 mm | /5V_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 3.08 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net |
| 337 | DRC | 170 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 144.3 | 104.45 | Track [/5V_FAN] on F.Cu, length 1.1314 mm | /5V_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 1.13 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net |
| 338 | DRC | 171 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 147.05 | 104.45 | Track [/5V_FAN] on F.Cu, length 2.7500 mm | /5V_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 0.99 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net |
| 339 | DRC | 172 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 176.45 | 98.8 | Track [/5V_FAN] on F.Cu, length 1.3000 mm | /5V_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 3.08 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net |
| 340 | DRC | 173 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 174.25 | 98.55 | Track [/5V_FAN] on B.Cu, length 38.0500 mm | /5V_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 38.05 | B.Cu | pre-existing-benign | 0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net |
| 341 | DRC | 174 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 174.25 | 60.5 | Track [/5V_FAN] on B.Cu, length 25.7387 mm | /5V_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 38.05 | B.Cu | pre-existing-benign | 0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net |
| 342 | DRC | 175 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 156.05 | 42.3 | Track [/5V_FAN] on B.Cu, length 2.6500 mm | /5V_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 25.74 | B.Cu | pre-existing-benign | 0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net |
| 343 | DRC | 176 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 174.275 | 100.975 | Track [/5V_FAN] on B.Cu, length 2.4000 mm | /5V_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 3.08 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net |
| 344 | DRC | 177 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 153.4 | 42.3 | Track [/5V_FAN] on B.Cu, length 2.3335 mm | /5V_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 2.65 | B.Cu | pre-existing-benign | 0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net |
| 345 | DRC | 178 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 174.275 | 98.575 | Track [/5V_FAN] on B.Cu, length 0.0354 mm | /5V_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 2.4 | B.Cu | pre-existing-benign | 0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net |
| 346 | DRC | 179 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 174.275 | 100.975 | Track [/5V_FAN] on In1.Cu, length 4.9851 mm | /5V_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 3.08 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net |
| 347 | DRC | 180 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 170.75 | 104.5 | Track [/5V_FAN] on In1.Cu, length 12.5500 mm | /5V_FAN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 4.99 | In1.Cu | pre-existing-benign | 0.5 mm In1.Cu capacity 0.72 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net |
| 348 | DRC | 181 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 161.6875 | 98.5 | Track [/FAN_RET] on F.Cu, length 0.8125 mm | /FAN_RET | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 0.81 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan low-side return); T15 rule over-strict for this net |
| 349 | DRC | 182 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 161.6875 | 99.3125 | Track [/FAN_RET] on F.Cu, length 1.6794 mm | /FAN_RET | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 0.81 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan low-side return); T15 rule over-strict for this net |
| 350 | DRC | 183 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 161.6875 | 98.5 | Track [/FAN_RET] on F.Cu, length 1.5000 mm | /FAN_RET | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 0.81 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan low-side return); T15 rule over-strict for this net |
| 351 | DRC | 184 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 164.0 | 53.7 | Track [/FAN_RET] on B.Cu, length 13.7886 mm | /FAN_RET | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 13.79 | B.Cu | pre-existing-benign | 0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (fan low-side return); T15 rule over-strict for this net |
| 352 | DRC | 185 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 164.0 | 93.1 | Track [/FAN_RET] on B.Cu, length 39.4000 mm | /FAN_RET | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 39.4 | B.Cu | pre-existing-benign | 0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (fan low-side return); T15 rule over-strict for this net |
| 353 | DRC | 186 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 161.6875 | 98.5 | Track [/FAN_RET] on B.Cu, length 3.0875 mm | /FAN_RET | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 0.81 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan low-side return); T15 rule over-strict for this net |
| 354 | DRC | 187 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 161.6875 | 95.4125 | Track [/FAN_RET] on B.Cu, length 3.2704 mm | /FAN_RET | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 3.09 | B.Cu | pre-existing-benign | 0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (fan low-side return); T15 rule over-strict for this net |
| 355 | DRC | 188 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm) | 187.0 | 111.0 | Track [/VEH5V] on F.Cu, length 1.3900 mm | /VEH5V | 0.25 | T15 power width: PWR_HI >= 1.0 mm | 1.39 | F.Cu | pre-existing-benign | 1.39 mm neck at U6 pin (pad-limited) |
| 356 | DRC | 189 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 176.8 | 116.5 | Track [/VEH5V] on F.Cu, length 0.2000 mm | /VEH5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.2 | F.Cu | real | 0.5 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 1.45 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path) |
| 357 | DRC | 190 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 169.27 | 123.65 | Track [/VEH5V] on F.Cu, length 0.1838 mm | /VEH5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.18 | F.Cu | real | 0.5 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 1.45 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path) |
| 358 | DRC | 191 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 186.0 | 105.0375 | Track [/VEH5V] on F.Cu, length 0.1688 mm | /VEH5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.17 | F.Cu | pre-existing-benign | 0.17 mm neck at U6 pin (pad-limited) |
| 359 | DRC | 192 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 183.5 | 113.45 | Track [/VEH5V] on F.Cu, length 1.0500 mm | /VEH5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 1.05 | F.Cu | real | 0.5 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 1.45 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path) |
| 360 | DRC | 193 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.3000 mm) | 186.0 | 105.8 | Track [/VEH5V] on F.Cu, length 0.7625 mm | /VEH5V | 0.3 | T15 power width: PWR_HI >= 1.0 mm | 0.76 | F.Cu | pre-existing-benign | 0.76 mm neck at U6 pin (pad-limited) |
| 361 | DRC | 194 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 179.65 | 113.45 | Track [/VEH5V] on F.Cu, length 0.3500 mm | /VEH5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.35 | F.Cu | real | 0.5 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 1.45 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path) |
| 362 | DRC | 195 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm) | 185.475 | 112.525 | Track [/VEH5V] on F.Cu, length 2.1567 mm | /VEH5V | 0.25 | T15 power width: PWR_HI >= 1.0 mm | 2.16 | F.Cu | real | 0.25 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 0.88 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path) |
| 363 | DRC | 196 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm) | 176.8 | 116.3 | Track [/VEH5V] on F.Cu, length 4.0305 mm | /VEH5V | 0.8 | T15 power width: PWR_HI >= 1.0 mm | 4.03 | F.Cu | real | 0.8 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 2.03 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path) |
| 364 | DRC | 197 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 186.0 | 104.8688 | Track [/VEH5V] on F.Cu, length 5.0647 mm | /VEH5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.17 | F.Cu | pre-existing-benign | 0.17 mm neck at U6 pin (pad-limited) |
| 365 | DRC | 198 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 182.4187 | 101.2875 | Track [/VEH5V] on F.Cu, length 0.1688 mm | /VEH5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.17 | F.Cu | real | 0.5 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 1.45 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path) |
| 366 | DRC | 199 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 184.55 | 113.45 | Track [/VEH5V] on F.Cu, length 1.3081 mm | /VEH5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 1.05 | F.Cu | real | 0.5 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 1.45 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path) |
| 367 | DRC | 200 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.3000 mm) | 184.575 | 114.525 | Track [/VEH5V] on F.Cu, length 1.5203 mm | /VEH5V | 0.3 | T15 power width: PWR_HI >= 1.0 mm | 1.52 | F.Cu | real | 0.3 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 1.00 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path) |
| 368 | DRC | 201 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 181.1438 | 111.0938 | Track [/VEH5V] on In1.Cu, length 8.7000 mm | /VEH5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 4.85 | In1.Cu | real | 0.5 mm In1.Cu carries ~3.0 A vs IPC-2221 10C capacity 0.72 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path) |
| 369 | DRC | 202 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 184.575 | 114.525 | Track [/VEH5V] on In1.Cu, length 4.8525 mm | /VEH5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 4.85 | In1.Cu | real | 0.5 mm In1.Cu carries ~3.0 A vs IPC-2221 10C capacity 0.72 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path) |
| 370 | DRC | 203 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 179.2 | 108.6 | Track [/MAIN5V] on F.Cu, length 0.0707 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.07 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 371 | DRC | 204 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 174.25 | 98.255 | Track [/MAIN5V] on F.Cu, length 0.7550 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.75 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 372 | DRC | 205 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.3000 mm) | 188.5 | 105.71 | Track [/MAIN5V] on F.Cu, length 0.3000 mm | /MAIN5V | 0.3 | T15 power width: PWR_HI >= 1.0 mm | 0.3 | F.Cu | pre-existing-benign | 0.30 mm neck at U6 pin (pad-limited) |
| 373 | DRC | 206 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.3000 mm) | 188.8 | 105.71 | Track [/MAIN5V] on F.Cu, length 0.9192 mm | /MAIN5V | 0.3 | T15 power width: PWR_HI >= 1.0 mm | 0.3 | F.Cu | pre-existing-benign | 0.30 mm neck at U6 pin (pad-limited) |
| 374 | DRC | 207 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 178.3 | 127.6 | Track [/MAIN5V] on F.Cu, length 0.1414 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.14 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 375 | DRC | 208 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 187.4 | 101.265 | Track [/MAIN5V] on F.Cu, length 0.2970 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.3 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 376 | DRC | 209 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 187.19 | 97.7138 | Track [/MAIN5V] on F.Cu, length 2.9965 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 3.0 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 377 | DRC | 210 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 169.0 | 103.25 | Track [/MAIN5V] on F.Cu, length 0.2550 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.25 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 378 | DRC | 211 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 169.255 | 103.25 | Track [/MAIN5V] on F.Cu, length 7.0640 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.25 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 379 | DRC | 212 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 179.15 | 108.55 | Track [/MAIN5V] on F.Cu, length 1.0500 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.07 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 380 | DRC | 213 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.3000 mm) | 189.45 | 106.36 | Track [/MAIN5V] on F.Cu, length 0.3000 mm | /MAIN5V | 0.3 | T15 power width: PWR_HI >= 1.0 mm | 0.92 | F.Cu | real | 0.3 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.00 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 381 | DRC | 214 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 190.75 | 102.25 | Track [/MAIN5V] on F.Cu, length 1.7678 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 1.77 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 382 | DRC | 215 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 190.75 | 105.36 | Track [/MAIN5V] on F.Cu, length 1.8031 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 1.8 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 383 | DRC | 216 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 169.0 | 99.63 | Track [/MAIN5V] on F.Cu, length 0.3182 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.32 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 384 | DRC | 217 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 169.0 | 103.25 | Track [/MAIN5V] on F.Cu, length 3.6200 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.25 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 385 | DRC | 218 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 187.19 | 101.055 | Track [/MAIN5V] on F.Cu, length 3.3412 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.3 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 386 | DRC | 219 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 179.2 | 109.7 | Track [/MAIN5V] on F.Cu, length 1.1000 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 1.1 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 387 | DRC | 220 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 189.475 | 106.635 | Track [/MAIN5V] on F.Cu, length 0.0250 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 1.8 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 388 | DRC | 221 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 190.75 | 105.36 | Track [/MAIN5V] on F.Cu, length 3.1100 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 1.8 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 389 | DRC | 222 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 176.435 | 127.6 | Track [/MAIN5V] on F.Cu, length 1.8650 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 1.87 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 390 | DRC | 223 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 178.4 | 127.5 | Track [/MAIN5V] on In1.Cu, length 0.2828 mm | /MAIN5V | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.14 | F.Cu | real | 0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A)) |
| 391 | DRC | 224 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 175.63 | 116.17 | Track [/VIN_PROT] on F.Cu, length 1.7300 mm | /VIN_PROT | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 1.73 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.8 A (U25 input at 24 V: 5 V*3 A/0.9/24 V = 0.7 A (1.1 A at 16 V)); T15 rule over-strict for this net |
| 392 | DRC | 225 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 175.63 | 117.9 | Track [/VIN_PROT] on F.Cu, length 0.2828 mm | /VIN_PROT | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 1.73 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.8 A (U25 input at 24 V: 5 V*3 A/0.9/24 V = 0.7 A (1.1 A at 16 V)); T15 rule over-strict for this net |
| 393 | DRC | 226 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 176.2 | 113.1 | Track [/VIN_PROT] on F.Cu, length 2.8284 mm | /VIN_PROT | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 2.83 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.8 A (U25 input at 24 V: 5 V*3 A/0.9/24 V = 0.7 A (1.1 A at 16 V)); T15 rule over-strict for this net |
| 394 | DRC | 227 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 174.2 | 115.1 | Track [/VIN_PROT] on F.Cu, length 5.2500 mm | /VIN_PROT | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 2.83 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.8 A (U25 input at 24 V: 5 V*3 A/0.9/24 V = 0.7 A (1.1 A at 16 V)); T15 rule over-strict for this net |
| 395 | DRC | 228 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 168.95 | 115.1 | Track [/VIN_PROT] on F.Cu, length 1.6263 mm | /VIN_PROT | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 5.25 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.8 A (U25 input at 24 V: 5 V*3 A/0.9/24 V = 0.7 A (1.1 A at 16 V)); T15 rule over-strict for this net |
| 396 | DRC | 229 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 192.8125 | 60.1125 | Track [/SW_IN] on F.Cu, length 1.2291 mm | /SW_IN | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 1.23 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.2 A (F1 output -> Q1 (F9P rail)); T15 rule over-strict for this net |
| 397 | DRC | 230 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 190.65 | 53.75 | Track [/SW_IN] on F.Cu, length 0.2121 mm | /SW_IN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 0.21 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F1 output -> Q1 (F9P rail)); T15 rule over-strict for this net |
| 398 | DRC | 231 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 195.4125 | 61.6875 | Track [/SW_IN] on F.Cu, length 1.3081 mm | /SW_IN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 1.31 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F1 output -> Q1 (F9P rail)); T15 rule over-strict for this net |
| 399 | DRC | 232 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 195.4 | 61.7 | Track [/SW_IN] on F.Cu, length 0.0177 mm | /SW_IN | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 0.02 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.2 A (F1 output -> Q1 (F9P rail)); T15 rule over-strict for this net |
| 400 | DRC | 233 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 192.8125 | 61.3416 | Track [/SW_IN] on F.Cu, length 0.5069 mm | /SW_IN | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 0.51 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.2 A (F1 output -> Q1 (F9P rail)); T15 rule over-strict for this net |
| 401 | DRC | 234 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 191.4 | 58.7 | Track [/SW_IN] on F.Cu, length 1.9976 mm | /SW_IN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 2.0 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F1 output -> Q1 (F9P rail)); T15 rule over-strict for this net |
| 402 | DRC | 235 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 193.1709 | 61.7 | Track [/SW_IN] on F.Cu, length 2.2291 mm | /SW_IN | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 2.23 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F1 output -> Q1 (F9P rail)); T15 rule over-strict for this net |
| 403 | DRC | 236 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 84.125 | 121.9313 | Track [/SW_5V] on F.Cu, length 1.3188 mm | /SW_5V | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 1.32 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net |
| 404 | DRC | 237 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 198.2125 | 59.8125 | Track [/SW_5V] on F.Cu, length 0.8309 mm | /SW_5V | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 0.83 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net |
| 405 | DRC | 238 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 84.125 | 123.25 | Track [/SW_5V] on F.Cu, length 1.3562 mm | /SW_5V | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 1.32 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net |
| 406 | DRC | 239 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 88.35 | 121.8812 | Track [/SW_5V] on F.Cu, length 2.0000 mm | /SW_5V | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 2.0 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net |
| 407 | DRC | 240 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 82.5406 | 126.2406 | Track [/SW_5V] on F.Cu, length 3.5187 mm | /SW_5V | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 3.52 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net |
| 408 | DRC | 241 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 88.35 | 123.95 | Track [/SW_5V] on F.Cu, length 2.0688 mm | /SW_5V | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 2.07 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net |
| 409 | DRC | 242 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 198.8 | 60.4 | Track [/SW_5V] on F.Cu, length 0.5000 mm | /SW_5V | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 0.83 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net |
| 410 | DRC | 243 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm) | 86.0594 | 126.2406 | Track [/SW_5V] on F.Cu, length 3.2394 mm | /SW_5V | 0.3 | T15 power width: PWR_MID >= 0.6 mm | 3.24 | F.Cu | pre-existing-benign | 0.3 mm F.Cu capacity 1.00 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net |
| 411 | DRC | 244 | track_width | warning | Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm) | 84.125 | 124.6063 | Track [/SW_5V] on F.Cu, length 0.0354 mm | /SW_5V | 0.5 | T15 power width: PWR_MID >= 0.6 mm | 0.04 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net |
| 412 | DRC | 245 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm) | 185.5 | 105.71 | Track [/VIN_SW] on F.Cu, length 0.5100 mm | /VIN_SW | 0.25 | T15 power width: PWR_HI >= 1.0 mm | 0.51 | F.Cu | pre-existing-benign | 0.51 mm neck at U6 pin (pad-limited) |
| 413 | DRC | 246 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm) | 184.5125 | 104.2125 | Track [/VIN_SW] on F.Cu, length 0.6000 mm | /VIN_SW | 0.25 | T15 power width: PWR_HI >= 1.0 mm | 0.6 | F.Cu | real | 0.25 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 0.88 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A) |
| 414 | DRC | 247 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm) | 182.25 | 104.2125 | Track [/VIN_SW] on F.Cu, length 1.6625 mm | /VIN_SW | 0.8 | T15 power width: PWR_HI >= 1.0 mm | 1.66 | F.Cu | real | 0.8 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 2.03 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A) |
| 415 | DRC | 248 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm) | 185.5 | 105.2 | Track [/VIN_SW] on F.Cu, length 1.3965 mm | /VIN_SW | 0.25 | T15 power width: PWR_HI >= 1.0 mm | 0.51 | F.Cu | pre-existing-benign | 0.51 mm neck at U6 pin (pad-limited) |
| 416 | DRC | 249 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm) | 167.275 | 99.3 | Track [/VIN_SW] on In2.Cu, length 4.2426 mm | /VIN_SW | 0.8 | T15 power width: PWR_HI >= 1.0 mm | 4.24 | In2.Cu | real | 0.8 mm In2.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.02 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A) |
| 417 | DRC | 250 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm) | 180.6 | 99.7 | Track [/VIN_SW] on In2.Cu, length 4.6846 mm | /VIN_SW | 0.8 | T15 power width: PWR_HI >= 1.0 mm | 4.68 | In2.Cu | real | 0.8 mm In2.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.02 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A) |
| 418 | DRC | 251 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm) | 167.275 | 99.3 | Track [/VIN_SW] on In2.Cu, length 0.5657 mm | /VIN_SW | 0.8 | T15 power width: PWR_HI >= 1.0 mm | 4.24 | In2.Cu | real | 0.8 mm In2.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.02 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A) |
| 419 | DRC | 252 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm) | 183.9125 | 103.0125 | Track [/VIN_SW] on In2.Cu, length 1.2000 mm | /VIN_SW | 0.8 | T15 power width: PWR_HI >= 1.0 mm | 4.68 | In2.Cu | real | 0.8 mm In2.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.02 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A) |
| 420 | DRC | 253 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm) | 167.675 | 99.7 | Track [/VIN_SW] on In2.Cu, length 12.9250 mm | /VIN_SW | 0.8 | T15 power width: PWR_HI >= 1.0 mm | 0.57 | In2.Cu | real | 0.8 mm In2.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.02 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A) |
| 421 | DRC | 254 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 183.9125 | 104.0311 | Track [/VIN_SW] on In2.Cu, length 0.1814 mm | /VIN_SW | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.18 | In2.Cu | real | 0.5 mm In2.Cu carries ~2.5 A vs IPC-2221 10C capacity 0.72 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A) |
| 422 | DRC | 255 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 145.2 | 62.575 | Track [/VIN_MODEM] on F.Cu, length 0.7000 mm | /VIN_MODEM | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 0.7 | F.Cu | pre-existing-benign | 0.70 mm neck at U20 pin (pad-limited) |
| 423 | DRC | 256 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 142.5 | 62.48 | Track [/VIN_MODEM] on F.Cu, length 1.9050 mm | /VIN_MODEM | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 1.91 | F.Cu | real | 0.5 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.45 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V)) |
| 424 | DRC | 257 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 142.5 | 62.48 | Track [/VIN_MODEM] on F.Cu, length 1.5300 mm | /VIN_MODEM | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 1.91 | F.Cu | real | 0.5 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.45 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V)) |
| 425 | DRC | 258 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 140.97 | 62.48 | Track [/VIN_MODEM] on F.Cu, length 0.5233 mm | /VIN_MODEM | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 1.53 | F.Cu | real | 0.5 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.45 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V)) |
| 426 | DRC | 259 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 144.405 | 62.48 | Track [/VIN_MODEM] on F.Cu, length 0.1344 mm | /VIN_MODEM | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 1.91 | F.Cu | real | 0.5 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.45 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V)) |
| 427 | DRC | 260 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 146.2 | 68.5 | Track [/VIN_MODEM] on F.Cu, length 0.4950 mm | /VIN_MODEM | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 0.49 | F.Cu | real | 0.5 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.45 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V)) |
| 428 | DRC | 261 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 145.8 | 68.1 | Track [/VIN_MODEM] on F.Cu, length 4.9250 mm | /VIN_MODEM | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 4.92 | F.Cu | real | 0.5 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.45 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V)) |
| 429 | DRC | 262 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.3000 mm) | 145.85 | 68.15 | Track [/VIN_MODEM] on F.Cu, length 0.0707 mm | /VIN_MODEM | 0.3 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 0.07 | F.Cu | real | 0.3 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.00 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V)) |
| 430 | DRC | 263 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 145.8 | 63.175 | Track [/VIN_MODEM] on F.Cu, length 0.8485 mm | /VIN_MODEM | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 4.92 | F.Cu | real | 0.5 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.45 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V)) |
| 431 | DRC | 264 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm) | 189.45 | 107.9 | Track [/SW_BAT] on F.Cu, length 0.2400 mm | /SW_BAT | 0.25 | T15 power width: PWR_HI >= 1.0 mm | 0.24 | F.Cu | pre-existing-benign | 0.24 mm neck at U6 pin (pad-limited) |
| 432 | DRC | 265 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm) | 189.45 | 108.16 | Track [/SW_BAT] on F.Cu, length 0.2600 mm | /SW_BAT | 0.25 | T15 power width: PWR_HI >= 1.0 mm | 0.26 | F.Cu | pre-existing-benign | 0.26 mm neck at U6 pin (pad-limited) |
| 433 | DRC | 266 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 190.113 | 107.9 | Track [/SW_BAT] on F.Cu, length 7.6184 mm | /SW_BAT | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 7.62 | F.Cu | real | 0.5 mm F.Cu carries ~4.0 A vs IPC-2221 10C capacity 1.45 A (LTC4040 boost switch, ~4 A in backup (5 V/2.5 A from 3.2-3.7 V pack) - V5 EMC audit) |
| 434 | DRC | 267 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 189.45 | 107.9 | Track [/SW_BAT] on F.Cu, length 0.6630 mm | /SW_BAT | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 0.66 | F.Cu | pre-existing-benign | 0.66 mm neck at U6 pin (pad-limited) |
| 435 | DRC | 268 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.3000 mm) | 189.45 | 108.16 | Track [/SW_BAT] on F.Cu, length 0.5000 mm | /SW_BAT | 0.3 | T15 power width: PWR_HI >= 1.0 mm | 0.5 | F.Cu | pre-existing-benign | 0.50 mm neck at U6 pin (pad-limited) |
| 436 | DRC | 269 | track_width | warning | Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm) | 195.5 | 102.513 | Track [/SW_BAT] on F.Cu, length 3.6130 mm | /SW_BAT | 0.5 | T15 power width: PWR_HI >= 1.0 mm | 7.62 | F.Cu | real | 0.5 mm F.Cu carries ~4.0 A vs IPC-2221 10C capacity 1.45 A (LTC4040 boost switch, ~4 A in backup (5 V/2.5 A from 3.2-3.7 V pack) - V5 EMC audit) |
| 437 | DRC | 270 | track_width | warning | Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm) | 153.9 | 121.9 | Track [/VIN_FUSED] on F.Cu, length 1.4725 mm | /VIN_FUSED | 0.5 | T15 power width: modem + vehicle PSU paths >= 0.8 mm | 1.47 | F.Cu | pre-existing-benign | 0.5 mm F.Cu capacity 1.45 A >= est. 0.8 A (same as VIN_PROT); T15 rule over-strict for this net |
| 438 | DRC | 271 | silk_overlap | warning | Silkscreen clearance | 70.6 | 127.075 | Reference field of D27 | board setup constraints silk | needs-fix-cosmetic | silkscreen legibility; JLC clips silk on pads/edge automatically | ||||
| 439 | DRC | 272 | silk_overlap | warning | Silkscreen clearance | 70.23 | 127.555 | Segment of D27 on F.Silkscreen | board setup constraints silk | needs-fix-cosmetic | silkscreen legibility; JLC clips silk on pads/edge automatically | ||||
| 440 | DRC | 273 | silk_overlap | warning | Silkscreen clearance | 118.5225 | 58.4873 | Segment of R99 on F.Silkscreen | board setup constraints silk | needs-fix-cosmetic | silkscreen legibility; JLC clips silk on pads/edge automatically | ||||
| 441 | DRC | 274 | silk_overlap | warning | Silkscreen clearance | 187.25 | 80.75 | Reference field of C126 | board setup constraints silk | needs-fix-cosmetic | silkscreen legibility; JLC clips silk on pads/edge automatically | ||||
| 442 | DRC | 275 | silk_overlap | warning | Silkscreen clearance | 161.5 | 83.5 | Reference field of Q21 | board setup constraints silk | needs-fix-cosmetic | silkscreen legibility; JLC clips silk on pads/edge automatically | ||||
| 443 | DRC | 276 | silk_overlap | warning | Silkscreen clearance | 171.45 | 99.0 | Segment of JP3 on F.Silkscreen | board setup constraints silk | needs-fix-cosmetic | silkscreen legibility; JLC clips silk on pads/edge automatically | ||||
| 444 | DRC | 277 | silk_overlap | warning | Silkscreen clearance | 171.75 | 98.7 | Segment of JP3 on F.Silkscreen | board setup constraints silk | needs-fix-cosmetic | silkscreen legibility; JLC clips silk on pads/edge automatically | ||||
| 445 | DRC | 278 | silk_overlap | warning | Silkscreen clearance | 155.75 | 73.98 | Arc of U24 on F.Silkscreen | board setup constraints silk | needs-fix-cosmetic | silkscreen legibility; JLC clips silk on pads/edge automatically | ||||
| 446 | DRC | 279 | silk_overlap | warning | Silkscreen clearance | 155.6 | 69.77 | Segment of U23 on F.Silkscreen | board setup constraints silk | needs-fix-cosmetic | silkscreen legibility; JLC clips silk on pads/edge automatically | ||||
| 447 | DRC | 280 | silk_overlap | warning | Silkscreen clearance | 137.05 | 125.17 | Segment of Q10 on F.Silkscreen | board setup constraints silk | needs-fix-cosmetic | silkscreen legibility; JLC clips silk on pads/edge automatically | ||||
| 448 | DRC | 281 | silk_overlap | warning | Silkscreen clearance | 155.25 | 116.75 | Reference field of Q23 | board setup constraints silk | needs-fix-cosmetic | silkscreen legibility; JLC clips silk on pads/edge automatically | ||||
| 449 | DRC | 282 | silk_over_copper | warning | Silkscreen clipped by solder mask | 123.55 | 56.75 | Reference field of Rigb1 | Local override | needs-fix-cosmetic | silkscreen legibility; JLC clips silk on pads/edge automatically | ||||
| 450 | DRC | 283 | silk_over_copper | warning | Silkscreen clipped by solder mask | 145.5 | 109.25 | Reference field of C10 | Local override | needs-fix-cosmetic | silkscreen legibility; JLC clips silk on pads/edge automatically |