Helgen-Services/Drogheda
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
8be9f41473
Drogheda/03-Architecture-Hardware/kicad/Drogheda-sym.kicad_sym
Claude (Cowork) 8be9f41473 v6 T3a: ZED-F9P + generic SOT-23-5 LDO symbols added to Drogheda-sym 
ZED-F9P: all 54 pins, numbers 1-54 complete and unique, transcribed from the u-blox
datasheet Table 11 (ZED-F9P-15B_DataSheet_UBX-23009090). Left column = power/RF/antenna
(17), right = interfaces/control/status (16), bottom = the 21 reserved pins. Body 55.88 x
50.8 mm. LCSC C5120257 carried as a property.

FINDING that changes Block N: the ZED-F9P HAS hardware status outputs - RTK_STAT (pin 20)
and GEOFENCE_STAT (pin 19). RTK_STAT: 0 = RTK fixed, blinking = receiving and using
corrections, 1 = no corrections. That is a HARDWARE answer to the question the June and
10-Ago RCAs could not answer. Wire RTK_STAT to PC3. (Earlier note implying only the UM980
had such pins was wrong.) ANT_OFF (pin 5) also exists.

LDO_SOT23-5: generic AP2112K / TPS7A20 pinout (1=VIN 2=GND 3=EN 4=NC/NR 5=VOUT) so U21
can be any SOT-23-5 low-noise LDO without a symbol change.

OPEN - blocks the PCB side of T3, not the schematic:
 * No ZED-F9P FOOTPRINT exists. Not in the project libs, not derivable from the datasheet
   (no land pattern) and the integration manual's drawings do not survive PDF text
   extraction. EasyEDA/LCSC is blocked by the egress allowlist from here.
   Fix: run locally -> pip install easyeda2kicad && easyeda2kicad --full --lcsc_id=C5120257
 * PRE-FAB CHECK: confirm the -04B datasheet carries the SAME pin assignment as the -15B.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YJ4eAB6zjQT49RVwpgfKdt
2026-08-24 23:12:28 +00:00

1637 lines
38 KiB
Plaintext
Raw Blame History

(kicad_symbol_lib
(version 20241209)
(generator "kicad-mcp")
(generator_version "9.0")
(symbol "MP1584EN"
(exclude_from_sim no)
(in_bom yes)
(on_board yes)
(property "Reference" "U"
(at 2.54 0 0)
(effects
(font (size 1.27 1.27))
)
)
(property "Value" "MP1584EN"
(at 0 -2.54 0)
(effects
(font (size 1.27 1.27))
)
)
(property "Footprint" "Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm"
(at 0 -5.08 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(property "Datasheet" "https://www.monolithicpower.com/en/mp1584.html"
(at 0 -7.62 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(property "Description" "MP1584EN 3A 28V step-down converter (SOIC-8-EP)"
(at 0 -10.16 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(property "ki_keywords" "buck regulator step-down MP1584"
(at 0 0 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(symbol "MP1584EN_0_1"
(rectangle
(start -5.08 -7.62)
(end 5.08 7.62)
(stroke (width 0.254) (type default))
(fill (type background))
)
)
(symbol "MP1584EN_1_1"
(pin power_in line
(at -7.62 5.08 0)
(length 2.54)
(name "VIN"
(effects (font (size 1.27 1.27)))
)
(number "7"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -7.62 2.54 0)
(length 2.54)
(name "EN"
(effects (font (size 1.27 1.27)))
)
(number "2"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -7.62 0 0)
(length 2.54)
(name "FREQ"
(effects (font (size 1.27 1.27)))
)
(number "6"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -7.62 -2.54 0)
(length 2.54)
(name "FB"
(effects (font (size 1.27 1.27)))
)
(number "4"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -7.62 -5.08 0)
(length 2.54)
(name "COMP"
(effects (font (size 1.27 1.27)))
)
(number "3"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 7.62 5.08 180)
(length 2.54)
(name "BST"
(effects (font (size 1.27 1.27)))
)
(number "8"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 7.62 2.54 180)
(length 2.54)
(name "SW"
(effects (font (size 1.27 1.27)))
)
(number "1"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at 0 -10.16 90)
(length 2.54)
(name "GND"
(effects (font (size 1.27 1.27)))
)
(number "5"
(effects (font (size 1.27 1.27)))
)
)
)
)
(symbol "LTC4040EUFD"
(exclude_from_sim no)
(in_bom yes)
(on_board yes)
(property "Reference" "U"
(at 2.54 0 0)
(effects
(font (size 1.27 1.27))
)
)
(property "Value" "LTC4040EUFD"
(at 0 -2.54 0)
(effects
(font (size 1.27 1.27))
)
)
(property "Footprint" "Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm"
(at 0 -5.08 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(property "Datasheet" "https://www.analog.com/media/en/technical-documentation/data-sheets/4040fb.pdf"
(at 0 -7.62 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(property "Description" "2.5A Battery Backup Power Manager, 1S Li-Ion/LiFePO4, buck charger + boost backup, QFN-24 4x5"
(at 0 -10.16 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(property "ki_keywords" "battery backup charger boost power-path LTC"
(at 0 0 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(symbol "LTC4040EUFD_0_1"
(rectangle
(start -15.24 -20.32)
(end 15.24 20.32)
(stroke (width 0.254) (type default))
(fill (type background))
)
)
(symbol "LTC4040EUFD_1_1"
(pin input line
(at -17.78 17.78 0)
(length 2.54)
(name "PFI"
(effects (font (size 1.27 1.27)))
)
(number "19"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at -17.78 15.24 0)
(length 2.54)
(name "BSTFB"
(effects (font (size 1.27 1.27)))
)
(number "18"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at -17.78 12.7 0)
(length 2.54)
(name "RSTFB"
(effects (font (size 1.27 1.27)))
)
(number "10"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -17.78 10.16 0)
(length 2.54)
(name "PROG"
(effects (font (size 1.27 1.27)))
)
(number "2"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -17.78 7.62 0)
(length 2.54)
(name "CLPROG"
(effects (font (size 1.27 1.27)))
)
(number "3"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at -17.78 5.08 0)
(length 2.54)
(name "NTC"
(effects (font (size 1.27 1.27)))
)
(number "17"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at -17.78 2.54 0)
(length 2.54)
(name "CHGOFF"
(effects (font (size 1.27 1.27)))
)
(number "4"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at -17.78 0 0)
(length 2.54)
(name "BSTOFF"
(effects (font (size 1.27 1.27)))
)
(number "5"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at -17.78 -2.54 0)
(length 2.54)
(name "F2"
(effects (font (size 1.27 1.27)))
)
(number "12"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at -17.78 -5.08 0)
(length 2.54)
(name "F1"
(effects (font (size 1.27 1.27)))
)
(number "13"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at -17.78 -7.62 0)
(length 2.54)
(name "F0"
(effects (font (size 1.27 1.27)))
)
(number "14"
(effects (font (size 1.27 1.27)))
)
)
(pin open_collector line
(at -17.78 -10.16 0)
(length 2.54)
(name "CHRG"
(effects (font (size 1.27 1.27)))
)
(number "8"
(effects (font (size 1.27 1.27)))
)
)
(pin open_collector line
(at -17.78 -12.7 0)
(length 2.54)
(name "FAULT"
(effects (font (size 1.27 1.27)))
)
(number "9"
(effects (font (size 1.27 1.27)))
)
)
(pin open_collector line
(at -17.78 -15.24 0)
(length 2.54)
(name "PFO"
(effects (font (size 1.27 1.27)))
)
(number "20"
(effects (font (size 1.27 1.27)))
)
)
(pin open_collector line
(at -17.78 -17.78 0)
(length 2.54)
(name "RST"
(effects (font (size 1.27 1.27)))
)
(number "11"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at 17.78 17.78 180)
(length 2.54)
(name "VIN"
(effects (font (size 1.27 1.27)))
)
(number "6"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 17.78 15.24 180)
(length 2.54)
(name "CLN"
(effects (font (size 1.27 1.27)))
)
(number "7"
(effects (font (size 1.27 1.27)))
)
)
(pin output line
(at 17.78 12.7 180)
(length 2.54)
(name "IGATE"
(effects (font (size 1.27 1.27)))
)
(number "15"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at 17.78 10.16 180)
(length 2.54)
(name "VSYS"
(effects (font (size 1.27 1.27)))
)
(number "1"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 17.78 7.62 180)
(length 2.54)
(name "VSYS"
(effects (font (size 1.27 1.27)))
)
(number "24"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 17.78 2.54 180)
(length 2.54)
(name "SW"
(effects (font (size 1.27 1.27)))
)
(number "21"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 17.78 0 180)
(length 2.54)
(name "SW"
(effects (font (size 1.27 1.27)))
)
(number "22"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 17.78 -5.08 180)
(length 2.54)
(name "BAT"
(effects (font (size 1.27 1.27)))
)
(number "23"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at 17.78 -10.16 180)
(length 2.54)
(name "OVSNS"
(effects (font (size 1.27 1.27)))
)
(number "16"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at 0 -22.86 90)
(length 2.54)
(name "GND_EP"
(effects (font (size 1.27 1.27)))
)
(number "25"
(effects (font (size 1.27 1.27)))
)
)
)
)
(symbol "AO4406A"
(exclude_from_sim no)
(in_bom yes)
(on_board yes)
(property "Reference" "Q"
(at 2.54 0 0)
(effects
(font (size 1.27 1.27))
)
)
(property "Value" "AO4406A"
(at 0 -2.54 0)
(effects
(font (size 1.27 1.27))
)
)
(property "Footprint" "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm"
(at 0 -5.08 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(property "Datasheet" "~"
(at 0 -7.62 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(property "Description" "N-Channel MOSFET 30V 13A 8.5mOhm SOIC-8 (pins 1-3=S, 4=G, 5-8=D) — VIN-VSYS disconnect"
(at 0 -10.16 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(property "ki_keywords" "nmos mosfet soic8 disconnect"
(at 0 0 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(symbol "AO4406A_0_1"
(rectangle
(start -5.08 -5.08)
(end 5.08 5.08)
(stroke (width 0.254) (type default))
(fill (type background))
)
)
(symbol "AO4406A_1_1"
(pin input line
(at -7.62 0 0)
(length 2.54)
(name "G"
(effects (font (size 1.27 1.27)))
)
(number "4"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -2.54 7.62 270)
(length 2.54)
(name "D"
(effects (font (size 1.27 1.27)))
)
(number "5"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 0 7.62 270)
(length 2.54)
(name "D"
(effects (font (size 1.27 1.27)))
)
(number "6"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 2.54 7.62 270)
(length 2.54)
(name "D"
(effects (font (size 1.27 1.27)))
)
(number "7"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 5.08 7.62 270)
(length 2.54)
(name "D"
(effects (font (size 1.27 1.27)))
)
(number "8"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -2.54 -7.62 90)
(length 2.54)
(name "S"
(effects (font (size 1.27 1.27)))
)
(number "1"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 0 -7.62 90)
(length 2.54)
(name "S"
(effects (font (size 1.27 1.27)))
)
(number "2"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 2.54 -7.62 90)
(length 2.54)
(name "S"
(effects (font (size 1.27 1.27)))
)
(number "3"
(effects (font (size 1.27 1.27)))
)
)
)
)
(symbol "SimpleRTK2B_Pro_Socket"
(exclude_from_sim no)
(in_bom yes)
(on_board yes)
(property "Reference" "MOD"
(at 2.54 0 0)
(effects
(font (size 1.27 1.27))
)
)
(property "Value" "SimpleRTK2B_Pro_Socket"
(at 0 -2.54 0)
(effects
(font (size 1.27 1.27))
)
)
(property "Footprint" "Module:Arduino_UNO_R3"
(at 0 -5.08 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(property "Datasheet" "https://www.ardusimple.com/simplertk2b-pro-hookup-guide/"
(at 0 -7.62 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(property "Description" "simpleRTK2B Pro (ZED-F9P) mounted as shield on Arduino-UNO-pattern female headers. Pads match Module:Arduino_UNO_R3. D0=TX1 D1=RX1 D2=RX2 D8=TX2 (Ardusimple pinout R00). IOREF driven 3.3V; 5V pin = input (5V=OUTPUT switch OFF); XBee-socket switch on the Pro parked on UART1."
(at 0 -10.16 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(property "ki_keywords" "ardusimple simplertk2b f9p shield socket carrier"
(at 0 0 0)
(effects
(font (size 1.27 1.27))
)
(hide yes)
)
(symbol "SimpleRTK2B_Pro_Socket_0_1"
(rectangle
(start -12.7 -26.67)
(end 12.7 24.13)
(stroke (width 0.254) (type default))
(fill (type background))
)
)
(symbol "SimpleRTK2B_Pro_Socket_1_1"
(pin output line
(at -15.24 20.32 0)
(length 2.54)
(name "TX1_D0"
(effects (font (size 1.27 1.27)))
)
(number "15"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at -15.24 17.78 0)
(length 2.54)
(name "RX1_D1"
(effects (font (size 1.27 1.27)))
)
(number "16"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at -15.24 15.24 0)
(length 2.54)
(name "RX2_D2"
(effects (font (size 1.27 1.27)))
)
(number "17"
(effects (font (size 1.27 1.27)))
)
)
(pin output line
(at -15.24 12.7 0)
(length 2.54)
(name "TX2_D8"
(effects (font (size 1.27 1.27)))
)
(number "23"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -15.24 7.62 0)
(length 2.54)
(name "SDA"
(effects (font (size 1.27 1.27)))
)
(number "31"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -15.24 5.08 0)
(length 2.54)
(name "SCL"
(effects (font (size 1.27 1.27)))
)
(number "32"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -15.24 2.54 0)
(length 2.54)
(name "AREF"
(effects (font (size 1.27 1.27)))
)
(number "30"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -15.24 0 0)
(length 2.54)
(name "D3"
(effects (font (size 1.27 1.27)))
)
(number "18"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -15.24 -2.54 0)
(length 2.54)
(name "D4"
(effects (font (size 1.27 1.27)))
)
(number "19"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -15.24 -5.08 0)
(length 2.54)
(name "D5"
(effects (font (size 1.27 1.27)))
)
(number "20"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -15.24 -7.62 0)
(length 2.54)
(name "D6"
(effects (font (size 1.27 1.27)))
)
(number "21"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -15.24 -10.16 0)
(length 2.54)
(name "D7"
(effects (font (size 1.27 1.27)))
)
(number "22"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -15.24 -12.7 0)
(length 2.54)
(name "D9"
(effects (font (size 1.27 1.27)))
)
(number "24"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -15.24 -15.24 0)
(length 2.54)
(name "D10"
(effects (font (size 1.27 1.27)))
)
(number "25"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -15.24 -17.78 0)
(length 2.54)
(name "FENCE_D11"
(effects (font (size 1.27 1.27)))
)
(number "26"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -15.24 -20.32 0)
(length 2.54)
(name "EXTINT_D12"
(effects (font (size 1.27 1.27)))
)
(number "27"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -15.24 -22.86 0)
(length 2.54)
(name "TPS_D13"
(effects (font (size 1.27 1.27)))
)
(number "28"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at 15.24 20.32 180)
(length 2.54)
(name "5V"
(effects (font (size 1.27 1.27)))
)
(number "5"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 15.24 17.78 180)
(length 2.54)
(name "VIN"
(effects (font (size 1.27 1.27)))
)
(number "8"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 15.24 15.24 180)
(length 2.54)
(name "3V3_OUT"
(effects (font (size 1.27 1.27)))
)
(number "4"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at 15.24 12.7 180)
(length 2.54)
(name "IOREF"
(effects (font (size 1.27 1.27)))
)
(number "2"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 15.24 10.16 180)
(length 2.54)
(name "RESET"
(effects (font (size 1.27 1.27)))
)
(number "3"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at 15.24 7.62 180)
(length 2.54)
(name "GND"
(effects (font (size 1.27 1.27)))
)
(number "6"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 15.24 5.08 180)
(length 2.54)
(name "GND"
(effects (font (size 1.27 1.27)))
)
(number "7"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 15.24 2.54 180)
(length 2.54)
(name "GND"
(effects (font (size 1.27 1.27)))
)
(number "29"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 15.24 0 180)
(length 2.54)
(name "A0"
(effects (font (size 1.27 1.27)))
)
(number "9"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 15.24 -2.54 180)
(length 2.54)
(name "A1"
(effects (font (size 1.27 1.27)))
)
(number "10"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 15.24 -5.08 180)
(length 2.54)
(name "A2"
(effects (font (size 1.27 1.27)))
)
(number "11"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 15.24 -7.62 180)
(length 2.54)
(name "A3"
(effects (font (size 1.27 1.27)))
)
(number "12"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 15.24 -10.16 180)
(length 2.54)
(name "A4"
(effects (font (size 1.27 1.27)))
)
(number "13"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 15.24 -12.7 180)
(length 2.54)
(name "A5"
(effects (font (size 1.27 1.27)))
)
(number "14"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 15.24 -17.78 180)
(length 2.54)
(name "NC"
(effects (font (size 1.27 1.27)))
)
(number "1"
(effects (font (size 1.27 1.27)))
)
)
)
)
(symbol "ZED-F9P"
(exclude_from_sim no)
(in_bom yes)
(on_board yes)
(property "Reference" "U"
(at 0 27.94 0)
(effects (font (size 1.27 1.27)))
)
(property "Value" "ZED-F9P-04B"
(at 0 30.48 0)
(effects (font (size 1.27 1.27)))
)
(property "Footprint" "Drogheda:u-blox_ZED-F9P_LGA54"
(at 0 -5.08 0)
(effects (font (size 1.27 1.27)))
(hide yes)
)
(property "Datasheet" "https://content.u-blox.com/sites/default/files/documents/ZED-F9P-15B_DataSheet_UBX-23009090.pdf"
(at 0 -7.62 0)
(effects (font (size 1.27 1.27)))
(hide yes)
)
(property "Description" "u-blox ZED-F9P multi-band L1/L2 GNSS receiver with RTK, 54-pin LGA 22.0 x 17.0 x 2.4 mm. NO internal LNA - an active antenna is mandatory. VCC 2.7-3.6 V, VCC ramp rate <= 20 us/V (damage limit). VCC_RF = VCC-0.1 V, 50 mA typ / 300 mA abs max. RESET_N needs a 7-13 kOhm pull-up. D_SEL open/high = UART. Reserved pins: leave open. LCSC C5120257."
(at 0 -10.16 0)
(effects (font (size 1.27 1.27)))
(hide yes)
)
(property "LCSC" "C5120257"
(at 0 -12.7 0)
(effects (font (size 1.27 1.27)))
(hide yes)
)
(property "ki_keywords" "ublox zed f9p gnss rtk gps l1 l2 receiver module"
(at 0 0 0)
(effects (font (size 1.27 1.27)))
(hide yes)
)
(symbol "ZED-F9P_0_1"
(rectangle
(start -27.94 25.4)
(end 27.94 -25.4)
(stroke (width 0.254) (type default))
(fill (type background))
)
)
(symbol "ZED-F9P_1_1"
(pin power_in line
(at -33.02 20.32 0)
(length 5.08)
(name "VCC"
(effects (font (size 1.27 1.27)))
)
(number "33"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at -33.02 17.78 0)
(length 5.08)
(name "VCC"
(effects (font (size 1.27 1.27)))
)
(number "34"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at -33.02 15.24 0)
(length 5.08)
(name "V_BCKP"
(effects (font (size 1.27 1.27)))
)
(number "36"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at -33.02 12.7 0)
(length 5.08)
(name "V_USB"
(effects (font (size 1.27 1.27)))
)
(number "38"
(effects (font (size 1.27 1.27)))
)
)
(pin power_out line
(at -33.02 10.16 0)
(length 5.08)
(name "VCC_RF"
(effects (font (size 1.27 1.27)))
)
(number "7"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at -33.02 7.62 0)
(length 5.08)
(name "RF_IN"
(effects (font (size 1.27 1.27)))
)
(number "2"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at -33.02 5.08 0)
(length 5.08)
(name "ANT_DETECT"
(effects (font (size 1.27 1.27)))
)
(number "4"
(effects (font (size 1.27 1.27)))
)
)
(pin output line
(at -33.02 2.54 0)
(length 5.08)
(name "ANT_OFF"
(effects (font (size 1.27 1.27)))
)
(number "5"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at -33.02 3.552713679e-15 0)
(length 5.08)
(name "ANT_SHORT_N"
(effects (font (size 1.27 1.27)))
)
(number "6"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at -33.02 -2.54 0)
(length 5.08)
(name "GND"
(effects (font (size 1.27 1.27)))
)
(number "1"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at -33.02 -5.08 0)
(length 5.08)
(name "GND"
(effects (font (size 1.27 1.27)))
)
(number "3"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at -33.02 -7.62 0)
(length 5.08)
(name "GND"
(effects (font (size 1.27 1.27)))
)
(number "12"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at -33.02 -10.16 0)
(length 5.08)
(name "GND"
(effects (font (size 1.27 1.27)))
)
(number "14"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at -33.02 -12.7 0)
(length 5.08)
(name "GND"
(effects (font (size 1.27 1.27)))
)
(number "32"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at -33.02 -15.24 0)
(length 5.08)
(name "GND"
(effects (font (size 1.27 1.27)))
)
(number "37"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at -33.02 -17.78 0)
(length 5.08)
(name "GND"
(effects (font (size 1.27 1.27)))
)
(number "41"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at -33.02 -20.32 0)
(length 5.08)
(name "GND"
(effects (font (size 1.27 1.27)))
)
(number "48"
(effects (font (size 1.27 1.27)))
)
)
(pin output line
(at 33.02 19.05 180)
(length 5.08)
(name "TXD"
(effects (font (size 1.27 1.27)))
)
(number "42"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at 33.02 16.51 180)
(length 5.08)
(name "RXD"
(effects (font (size 1.27 1.27)))
)
(number "43"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at 33.02 13.97 180)
(length 5.08)
(name "RXD2"
(effects (font (size 1.27 1.27)))
)
(number "26"
(effects (font (size 1.27 1.27)))
)
)
(pin output line
(at 33.02 11.43 180)
(length 5.08)
(name "TXD2"
(effects (font (size 1.27 1.27)))
)
(number "27"
(effects (font (size 1.27 1.27)))
)
)
(pin bidirectional line
(at 33.02 8.89 180)
(length 5.08)
(name "SDA"
(effects (font (size 1.27 1.27)))
)
(number "44"
(effects (font (size 1.27 1.27)))
)
)
(pin bidirectional line
(at 33.02 6.35 180)
(length 5.08)
(name "SCL"
(effects (font (size 1.27 1.27)))
)
(number "45"
(effects (font (size 1.27 1.27)))
)
)
(pin bidirectional line
(at 33.02 3.81 180)
(length 5.08)
(name "USB_DM"
(effects (font (size 1.27 1.27)))
)
(number "39"
(effects (font (size 1.27 1.27)))
)
)
(pin bidirectional line
(at 33.02 1.27 180)
(length 5.08)
(name "USB_DP"
(effects (font (size 1.27 1.27)))
)
(number "40"
(effects (font (size 1.27 1.27)))
)
)
(pin output line
(at 33.02 -1.27 180)
(length 5.08)
(name "TX_READY"
(effects (font (size 1.27 1.27)))
)
(number "46"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at 33.02 -3.81 180)
(length 5.08)
(name "D_SEL"
(effects (font (size 1.27 1.27)))
)
(number "47"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at 33.02 -6.35 180)
(length 5.08)
(name "RESET_N"
(effects (font (size 1.27 1.27)))
)
(number "49"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at 33.02 -8.89 180)
(length 5.08)
(name "SAFEBOOT_N"
(effects (font (size 1.27 1.27)))
)
(number "50"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at 33.02 -11.43 180)
(length 5.08)
(name "EXTINT"
(effects (font (size 1.27 1.27)))
)
(number "51"
(effects (font (size 1.27 1.27)))
)
)
(pin output line
(at 33.02 -13.97 180)
(length 5.08)
(name "TIMEPULSE"
(effects (font (size 1.27 1.27)))
)
(number "53"
(effects (font (size 1.27 1.27)))
)
)
(pin output line
(at 33.02 -16.51 180)
(length 5.08)
(name "GEOFENCE_STAT"
(effects (font (size 1.27 1.27)))
)
(number "19"
(effects (font (size 1.27 1.27)))
)
)
(pin output line
(at 33.02 -19.05 180)
(length 5.08)
(name "RTK_STAT"
(effects (font (size 1.27 1.27)))
)
(number "20"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -25.4 -30.48 90)
(length 5.08)
(name "RSVD8"
(effects (font (size 1.27 1.27)))
)
(number "8"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -22.86 -30.48 90)
(length 5.08)
(name "RSVD9"
(effects (font (size 1.27 1.27)))
)
(number "9"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -20.32 -30.48 90)
(length 5.08)
(name "RSVD10"
(effects (font (size 1.27 1.27)))
)
(number "10"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -17.78 -30.48 90)
(length 5.08)
(name "RSVD11"
(effects (font (size 1.27 1.27)))
)
(number "11"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -15.24 -30.48 90)
(length 5.08)
(name "RSVD13"
(effects (font (size 1.27 1.27)))
)
(number "13"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -12.7 -30.48 90)
(length 5.08)
(name "RSVD15"
(effects (font (size 1.27 1.27)))
)
(number "15"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -10.16 -30.48 90)
(length 5.08)
(name "RSVD16"
(effects (font (size 1.27 1.27)))
)
(number "16"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -7.62 -30.48 90)
(length 5.08)
(name "RSVD17"
(effects (font (size 1.27 1.27)))
)
(number "17"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -5.08 -30.48 90)
(length 5.08)
(name "RSVD18"
(effects (font (size 1.27 1.27)))
)
(number "18"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -2.54 -30.48 90)
(length 5.08)
(name "RSVD21"
(effects (font (size 1.27 1.27)))
)
(number "21"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at -3.552713679e-15 -30.48 90)
(length 5.08)
(name "RSVD22"
(effects (font (size 1.27 1.27)))
)
(number "22"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 2.54 -30.48 90)
(length 5.08)
(name "RSVD23"
(effects (font (size 1.27 1.27)))
)
(number "23"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 5.08 -30.48 90)
(length 5.08)
(name "RSVD24"
(effects (font (size 1.27 1.27)))
)
(number "24"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 7.62 -30.48 90)
(length 5.08)
(name "RSVD25"
(effects (font (size 1.27 1.27)))
)
(number "25"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 10.16 -30.48 90)
(length 5.08)
(name "RSVD28"
(effects (font (size 1.27 1.27)))
)
(number "28"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 12.7 -30.48 90)
(length 5.08)
(name "RSVD29"
(effects (font (size 1.27 1.27)))
)
(number "29"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 15.24 -30.48 90)
(length 5.08)
(name "RSVD30"
(effects (font (size 1.27 1.27)))
)
(number "30"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 17.78 -30.48 90)
(length 5.08)
(name "RSVD31"
(effects (font (size 1.27 1.27)))
)
(number "31"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 20.32 -30.48 90)
(length 5.08)
(name "RSVD35"
(effects (font (size 1.27 1.27)))
)
(number "35"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 22.86 -30.48 90)
(length 5.08)
(name "RSVD52"
(effects (font (size 1.27 1.27)))
)
(number "52"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 25.4 -30.48 90)
(length 5.08)
(name "RSVD54"
(effects (font (size 1.27 1.27)))
)
(number "54"
(effects (font (size 1.27 1.27)))
)
)
)
)
(symbol "LDO_SOT23-5"
(exclude_from_sim no)
(in_bom yes)
(on_board yes)
(property "Reference" "U"
(at 0 6.35 0)
(effects (font (size 1.27 1.27)))
)
(property "Value" "LDO_SOT23-5"
(at 0 3.81 0)
(effects (font (size 1.27 1.27)))
)
(property "Footprint" "Package_TO_SOT_SMD:SOT-23-5"
(at 0 -6.35 0)
(effects (font (size 1.27 1.27)))
(hide yes)
)
(property "Datasheet" ""
(at 0 -8.89 0)
(effects (font (size 1.27 1.27)))
(hide yes)
)
(property "Description" "Generic SOT-23-5 LDO, AP2112K / TPS7A20 pinout: 1=VIN 2=GND 3=EN 4=NC/NR 5=VOUT. Used on v6 as the low-noise GNSS rail regulator (U21). Verify the chosen part matches this pinout AND meets the ZED-F9P VCC ramp limit of 20 us/V."
(at 0 -11.43 0)
(effects (font (size 1.27 1.27)))
(hide yes)
)
(property "ki_keywords" "ldo regulator linear sot23-5 low noise"
(at 0 0 0)
(effects (font (size 1.27 1.27)))
(hide yes)
)
(symbol "LDO_SOT23-5_0_1"
(rectangle
(start -7.62 2.54)
(end 7.62 -5.08)
(stroke (width 0.254) (type default))
(fill (type background))
)
)
(symbol "LDO_SOT23-5_1_1"
(pin power_in line
(at -12.7 0 0)
(length 5.08)
(name "VIN"
(effects (font (size 1.27 1.27)))
)
(number "1"
(effects (font (size 1.27 1.27)))
)
)
(pin power_in line
(at 0 -10.16 90)
(length 5.08)
(name "GND"
(effects (font (size 1.27 1.27)))
)
(number "2"
(effects (font (size 1.27 1.27)))
)
)
(pin input line
(at -12.7 -2.54 0)
(length 5.08)
(name "EN"
(effects (font (size 1.27 1.27)))
)
(number "3"
(effects (font (size 1.27 1.27)))
)
)
(pin passive line
(at 12.7 -2.54 180)
(length 5.08)
(name "NC_NR"
(effects (font (size 1.27 1.27)))
)
(number "4"
(effects (font (size 1.27 1.27)))
)
)
(pin power_out line
(at 12.7 0 180)
(length 5.08)
(name "VOUT"
(effects (font (size 1.27 1.27)))
)
(number "5"
(effects (font (size 1.27 1.27)))
)
)
)
)
)
Reference in New Issue View Git Blame Copy Permalink