451 lines
155 KiB
Plaintext
451 lines
155 KiB
Plaintext
tool,idx,type,severity,message,x_mm,y_mm,item/refs,net,actual_width_mm,rule,seg_length_mm,layer,classification,justification
|
|
ERC,1,no_connect_connected,warning,"A pin with a ""no connection"" flag is connected",31.75,163.83,R31,/I2C_SDA,,,,,needs-fix-cosmetic,"NC flag on a connected pin (U16.37/38 USART6, U10.13/14 I2C); nets are connected in the netlist; remove the stray flags so ERC stays meaningful"
|
|
ERC,2,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,47.3,401.65,U26 C158,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,3,pin_to_pin,warning,Pins of type Unspecified and Bidirectional are connected,47.3,404.19,U26 U3,/I2C_SDA,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,4,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,47.3,406.73,U26 C158,/3V3,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,5,pin_to_pin,warning,Pins of type Unspecified and Bidirectional are connected,47.3,411.81,U26 U16,/ACC_INT1,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,6,unconnected_wire_endpoint,warning,Unconnected wire endpoint,50.8,25.4,P1,,,,,,needs-fix-cosmetic,"dangling wire stub at a pin that is connected by another wire (P1.4=GND, R52.2=GND in netlist); delete stub"
|
|
ERC,7,lib_symbol_mismatch,warning,Symbol 'Fuse_CER' doesn't match copy in library 'Drogheda-sym',55.0,345.0,F2,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,8,lib_symbol_issues,warning,Symbol 'Q_PMOS_GDS' not found in symbol library 'Device',72.0,345.0,Q23,,,,,,needs-fix-cosmetic,"symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable"
|
|
ERC,9,pin_to_pin,warning,Pins of type Unspecified and Input are connected,72.7,401.65,U26 U3,/I2C_SCL,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,10,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,72.7,406.73,U26 U26,/3V3,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,11,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,72.7,409.27,U26 U26,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,12,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,72.7,411.81,U26 C158,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,13,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,72.7,414.35,U26 C158,/3V3,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,14,lib_symbol_issues,warning,Symbol 'D_Zener_ANK' not found in symbol library 'Device',81.28,100.33,DzG1,,,,,,needs-fix-cosmetic,"symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable"
|
|
ERC,15,lib_symbol_issues,warning,Symbol 'Q_PMOS_GDS' not found in symbol library 'Device',83.82,115.57,Q10,,,,,,needs-fix-cosmetic,"symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable"
|
|
ERC,16,lib_symbol_issues,warning,Symbol 'D_Zener_ANK' not found in symbol library 'Device',92.0,352.0,D33,,,,,,needs-fix-cosmetic,"symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable"
|
|
ERC,17,lib_symbol_mismatch,warning,Symbol 'TPS54360B' doesn't match copy in library 'Drogheda-sym',145.0,348.0,U25,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,18,lib_symbol_mismatch,warning,Symbol 'L' doesn't match copy in library 'Device',152.4,228.6,L2,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,19,lib_symbol_mismatch,warning,Symbol 'L' doesn't match copy in library 'Device',174.0,348.0,L22,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,20,unconnected_wire_endpoint,warning,Unconnected wire endpoint,201.676,216.408,R52,,,,,,needs-fix-cosmetic,"dangling wire stub at a pin that is connected by another wire (P1.4=GND, R52.2=GND in netlist); delete stub"
|
|
ERC,21,lib_symbol_issues,warning,Symbol 'Q_NMOS_GSD' not found in symbol library 'Device',205.74,121.92,Q2,,,,,,needs-fix-cosmetic,"symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable"
|
|
ERC,22,lib_symbol_issues,warning,Symbol 'Q_PMOS_GSD' not found in symbol library 'Device',214.63,80.01,Q1,,,,,,needs-fix-cosmetic,"symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable"
|
|
ERC,23,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,234.92,293.0,D21 D20,/VIN_MODEM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,24,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,241.03,381.19,U23 C137,/1V8_MODEM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,25,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,241.03,383.73,U23 U19,/DIN_4G_M,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,26,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,241.03,388.81,U23 C137,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,27,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,241.03,404.19,U24 C139,/1V8_MODEM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,28,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,241.03,406.73,U24 U19,/DOUT_4G_M,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,29,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,241.03,409.27,U24 U19,/MODEM_STATUS_M,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,30,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,241.03,411.81,U24 C139,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,31,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,245.08,293.0,D21 JP4,/MAIN5V,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,32,lib_symbol_issues,warning,Symbol 'Q_NMOS_GSD' not found in symbol library 'Device',246.0,330.0,Q20,,,,,,needs-fix-cosmetic,"symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable"
|
|
ERC,33,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,249.3,297.46,U20 C129,/BST_MODEM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,34,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,249.3,300.0,U20 D21,/VIN_MODEM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,35,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,249.3,302.54,U20 R113,/MODEM_PWR_EN,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,36,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,249.3,305.08,U20 R117,/RT_MODEM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,37,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,262.0,292.38,U20 C128,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,38,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,268.97,381.19,U23 C138,/3V3,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,39,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,268.97,383.73,U23 R108,/DIN_4G,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,40,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,268.97,386.27,U23 U23,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,41,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,268.97,388.81,U23 C138,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,42,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,268.97,404.19,U24 C140,/3V3,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,43,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,268.97,406.73,U24 R107,/DOUT_4G,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,44,pin_to_pin,warning,Pins of type Unspecified and Bidirectional are connected,268.97,409.27,U24 U16,/MODEM_STATUS,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,45,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,268.97,411.81,U24 C139,/1V8_MODEM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,46,lib_symbol_issues,warning,Symbol 'Q_NMOS_GSD' not found in symbol library 'Device',270.0,330.0,Q21,,,,,,needs-fix-cosmetic,"symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable"
|
|
ERC,47,lib_symbol_issues,warning,Symbol 'Q_NMOS_GSD' not found in symbol library 'Device',271.78,104.14,Q4,,,,,,needs-fix-cosmetic,"symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable"
|
|
ERC,48,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,274.7,297.46,U20 C129,/SW_MODEM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,49,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,274.7,300.0,U20 R113,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,50,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,274.7,302.54,U20 C142,/COMP_MODEM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,51,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,274.7,305.08,U20 R110,/FB_MODEM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,52,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,294.92,370.0,D22 C130,/VBAT_MODEM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,53,lib_symbol_mismatch,warning,Symbol 'SW_Push' doesn't match copy in library 'Switch',300.0,110.0,SW1,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,54,lib_symbol_mismatch,warning,Symbol 'L' doesn't match copy in library 'Device',300.0,300.0,L20,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,55,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.08,370.0,D22 C130,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,56,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.87,252.53,U19 Q20,/MODEM_PWRKEY_M,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,57,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.87,255.07,U19 C147,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,58,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.87,265.23,U19 TP8,/MODEM_BOOT,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,59,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.87,272.85,U19 R107,/DOUT_4G_M,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,60,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.87,275.39,U19 R108,/DIN_4G_M,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,61,pin_to_pin,warning,Pins of type Unspecified and Power output are connected,305.87,288.09,U19 PF17,/1V8_MODEM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,62,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.87,290.63,U19 Q21,/MODEM_RST_M,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,63,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.87,293.17,U19 R111,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,64,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,305.87,295.71,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,65,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.87,310.95,U19 J9,/USB_VBUS,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,66,pin_to_pin,warning,Pins of type Unspecified and Bidirectional are connected,305.87,318.57,U19 J9,/USB_DP,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,67,pin_to_pin,warning,Pins of type Unspecified and Bidirectional are connected,305.87,321.11,U19 J9,/USB_DM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,68,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.87,323.65,U19 R111,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,69,pin_to_pin,warning,Pins of type Unspecified and Power output are connected,305.87,326.19,U19 PF18,/SIM_VDD,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,70,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.87,328.73,U19 D23,/SIM_DATA,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,71,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.87,331.27,U19 R129,/SIM_CLK,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,72,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.87,333.81,U19 R128,/SIM_RST,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,73,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,305.87,349.05,U19 D22,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,74,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,305.87,364.29,U19 D22,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,75,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,305.87,366.83,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,76,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.87,382.07,U19 R109,/NETLIGHT_1V8,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,77,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.87,387.15,U19 C130,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,78,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,305.87,389.69,U19 D22,/VBAT_MODEM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,79,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,305.87,392.23,U19 U19,/VBAT_MODEM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,80,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,305.87,394.77,U19 U19,/VBAT_MODEM,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,81,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,305.87,397.31,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,82,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,305.87,399.85,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,83,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,305.87,402.39,U19 R118,/RF_LTE,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,84,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,305.87,404.93,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,85,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,305.87,407.47,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,86,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,317.3,259.46,J13 C147,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,87,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,330.0,267.08,J13 D28,/RF_ANT_LTE,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,88,lib_symbol_mismatch,warning,Symbol 'L' doesn't match copy in library 'Device',330.2,166.116,L6,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,89,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,338.92,262.0,D28 C147,/RF_ANT_LTE,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,90,lib_symbol_mismatch,warning,Symbol 'NANOSIM_JAE' doesn't match copy in library 'Drogheda-sym',340.0,485.0,J14,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,91,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,342.7,259.46,J13 D28,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,92,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,349.08,262.0,D28 C24,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,93,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,328.73,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,94,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,333.81,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,95,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,336.35,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,96,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,341.43,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,97,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,343.97,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,98,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,346.51,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,99,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,349.05,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,100,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,351.59,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,101,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,354.13,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,102,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,356.67,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,103,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,359.21,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,104,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,361.75,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,105,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,364.29,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,106,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,366.83,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,107,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,369.37,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,108,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,351.59,371.91,U19 C136,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,109,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,351.59,374.45,U19 C136,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,110,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,376.99,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,111,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,379.53,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,112,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,382.07,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,113,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,384.61,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,114,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,387.15,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,115,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,389.69,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,116,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,392.23,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,117,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,402.39,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,118,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,351.59,404.93,U19 U19,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,119,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,351.59,407.47,U19 C136,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,120,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,387.3,152.46,J12 C123,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,121,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,400.0,160.08,J12 D27,/RF_ANT_GNSS,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,122,lib_symbol_mismatch,warning,Symbol 'MFF2_SIM' doesn't match copy in library 'Drogheda-sym',400.0,340.0,U22,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,123,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,400.92,165.0,D27 L21,/RF_ANT_GNSS,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,124,pin_to_pin,warning,Pins of type Unspecified and Passive are connected,411.08,165.0,D27 C144,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,125,pin_to_pin,warning,Pins of type Unspecified and Unspecified are connected,412.7,152.46,J12 D27,GND,,,,,pre-existing-benign,"easyeda-imported symbols with all pins typed Unspecified (U19/U20/U23/U24/U26/D21/D22/D27/D28/J12/J13); net-by-net review found no driver conflict (U23 DIR=GND B->A, U24 DIR=VCCA A->B, open-drain Q20/Q21, single drivers on UART/STATUS)"
|
|
ERC,126,lib_symbol_mismatch,warning,Symbol 'L' doesn't match copy in library 'Device',424.0,160.0,L21,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,127,lib_symbol_mismatch,warning,Symbol 'SW_Push' doesn't match copy in library 'Switch',436.88,502.92,SW2,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,128,lib_symbol_mismatch,warning,Symbol 'Crystal' doesn't match copy in library 'Device',436.88,530.86,Y3,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,129,lib_symbol_mismatch,warning,Symbol 'AO4406A' doesn't match copy in library 'Drogheda-sym',447.04,230.886,Q7,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,130,no_connect_dangling,warning,"Unconnected ""no connection"" flag",453.898,99.568,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,131,no_connect_dangling,warning,"Unconnected ""no connection"" flag",453.898,102.108,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,132,no_connect_dangling,warning,"Unconnected ""no connection"" flag",453.898,104.648,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,133,no_connect_dangling,warning,"Unconnected ""no connection"" flag",453.898,107.188,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,134,no_connect_dangling,warning,"Unconnected ""no connection"" flag",453.898,109.728,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,135,no_connect_dangling,warning,"Unconnected ""no connection"" flag",453.898,112.268,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,136,no_connect_dangling,warning,"Unconnected ""no connection"" flag",453.898,114.808,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,137,no_connect_dangling,warning,"Unconnected ""no connection"" flag",453.898,117.348,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,138,no_connect_dangling,warning,"Unconnected ""no connection"" flag",453.898,119.888,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,139,no_connect_dangling,warning,"Unconnected ""no connection"" flag",453.898,122.428,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,140,no_connect_dangling,warning,"Unconnected ""no connection"" flag",453.898,124.968,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,141,no_connect_dangling,warning,"Unconnected ""no connection"" flag",453.898,127.508,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,142,no_connect_dangling,warning,"Unconnected ""no connection"" flag",453.898,130.048,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,143,lib_symbol_mismatch,warning,Symbol 'Crystal' doesn't match copy in library 'Device',474.98,530.86,Y4,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,144,no_connect_dangling,warning,"Unconnected ""no connection"" flag",484.378,89.408,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,145,no_connect_dangling,warning,"Unconnected ""no connection"" flag",484.378,91.948,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,146,no_connect_dangling,warning,"Unconnected ""no connection"" flag",484.378,97.028,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,147,no_connect_dangling,warning,"Unconnected ""no connection"" flag",484.378,107.188,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,148,no_connect_dangling,warning,"Unconnected ""no connection"" flag",484.378,109.728,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,149,no_connect_dangling,warning,"Unconnected ""no connection"" flag",484.378,112.268,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,150,no_connect_dangling,warning,"Unconnected ""no connection"" flag",484.378,114.808,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,151,no_connect_dangling,warning,"Unconnected ""no connection"" flag",484.378,117.348,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,152,no_connect_dangling,warning,"Unconnected ""no connection"" flag",484.378,119.888,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,153,no_connect_dangling,warning,"Unconnected ""no connection"" flag",484.378,124.968,,,,,,,needs-fix-cosmetic,orphan NC flags left from the deleted SimpleRTK2B socket (two columns x=453.9/484.4 mm); touch nothing; delete
|
|
ERC,154,lib_symbol_mismatch,warning,Symbol 'STM32F411RETx' doesn't match copy in library 'MCU_ST_STM32F4',500.38,434.34,U16,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,155,no_connect_connected,warning,"A pin with a ""no connection"" flag is connected",513.588,182.372,K1,/USART6_TX,,,,,needs-fix-cosmetic,"NC flag on a connected pin (U16.37/38 USART6, U10.13/14 I2C); nets are connected in the netlist; remove the stray flags so ERC stays meaningful"
|
|
ERC,156,lib_symbol_mismatch,warning,Symbol 'D' doesn't match copy in library 'Device',519.968,202.992,D6,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,157,lib_symbol_mismatch,warning,Symbol 'Crystal' doesn't match copy in library 'Device',539.75,167.64,Y2,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,158,lib_symbol_issues,warning,Symbol 'PCF8574' not found in symbol library 'Interface_Expansion',565.15,59.69,U13,,,,,,needs-fix-cosmetic,"symbol renamed/removed in KiCad 10 libs (Q_*MOS_G?S, D_Zener_ANK, PCF8574); pin maps verified vs part datasheets (IRFR5305 DPAK G-D(tab)-S, AO3401A/AO3400A/2N7002 G-S-D, BZX84 A-NC-K, PCF8574T SO16); re-link to project lib to keep them editable"
|
|
ERC,159,lib_symbol_mismatch,warning,Symbol 'SP3485EN' doesn't match copy in library 'Interface_UART',609.6,139.7,U14,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,160,footprint_link_issues,warning,"Footprint 'PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Vertical' not found in library 'Connector_Phoenix_MC'",650.24,139.7,P11,,,,,,real,P11/P12 schematic fp = Vertical (not in lib) while PCB + LCSC C5160226 are right-angle/Horizontal; J10 lib nickname Connector_RJ45 not configured. An Update-PCB would swap/flip these (DNP too)
|
|
ERC,161,footprint_link_issues,warning,"Footprint 'PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Vertical' not found in library 'Connector_Phoenix_MC'",650.24,204.47,P12,,,,,,real,P11/P12 schematic fp = Vertical (not in lib) while PCB + LCSC C5160226 are right-angle/Horizontal; J10 lib nickname Connector_RJ45 not configured. An Update-PCB would swap/flip these (DNP too)
|
|
ERC,162,lib_symbol_mismatch,warning,Symbol 'AMS1117-3.3' doesn't match copy in library 'Regulator_Linear',665.48,502.92,U17,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,163,lib_symbol_mismatch,warning,Symbol 'Crystal' doesn't match copy in library 'Device',694.69,175.26,Y1,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,164,lib_symbol_mismatch,warning,Symbol 'L' doesn't match copy in library 'Device',722.63,222.25,L8,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,165,lib_symbol_mismatch,warning,Symbol 'RJ45_Hanrun_HR911105A_Horizontal' doesn't match copy in library 'Connector',800.1,90.17,J10,,,,,,pre-existing-benign,"embedded symbol differs from current lib copy; pin->pad->net verified on sampled parts (U25 vs TPS54360B DS, U17, Q7, D6, crystals, L); do not bulk-update"
|
|
ERC,166,footprint_link_issues,warning,The current configuration does not include the footprint library 'Connector_RJ45',800.1,90.17,J10,,,,,,real,P11/P12 schematic fp = Vertical (not in lib) while PCB + LCSC C5160226 are right-angle/Horizontal; J10 lib nickname Connector_RJ45 not configured. An Update-PCB would swap/flip these (DNP too)
|
|
DRC,1,silk_edge_clearance,warning,Silkscreen clipped by board edge,200.1917,140.3231,Segment on Edge.Cuts,,,board setup constraints silk,,,needs-fix-cosmetic,silkscreen legibility; JLC clips silk on pads/edge automatically
|
|
DRC,2,lib_footprint_issues,warning,Footprint 'MountingHole_3.2mm' not found in library 'MountingHole',195.2,135.3,Footprint MH8,,,Local override,,,needs-fix-cosmetic,MountingHole library nickname not in fp-lib-table; board-only MH5-8 are fine for fab
|
|
DRC,3,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',116.7,97.0,Footprint C81,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,4,lib_footprint_mismatch,warning,Footprint 'C_0805_2012Metric' does not match copy in library 'Capacitor_SMD',83.75,53.45,Footprint C102,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,5,lib_footprint_mismatch,warning,Footprint 'JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical' does not match copy in library 'Connector_JST',196.0,110.5,Footprint P3,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,6,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',94.5,61.275,Footprint C92,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,7,lib_footprint_mismatch,warning,Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST',100.25,44.0,Footprint P6,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,8,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',101.5,57.5,Footprint C93,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,9,lib_footprint_mismatch,warning,Footprint 'LQFP-64_10x10mm_P0.5mm' does not match copy in library 'Package_QFP',120.7,67.425,Footprint U16,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,10,lib_footprint_mismatch,warning,Footprint 'LQFP-48_7x7mm_P0.5mm' does not match copy in library 'Package_QFP',95.1625,53.83,Footprint U11,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,11,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',86.675,50.5,Footprint R93,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,12,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',92.5,61.275,Footprint C98,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,13,lib_footprint_mismatch,warning,Footprint 'SOT-223-3_TabPin2' does not match copy in library 'Package_TO_SOT_SMD',92.5,80.0,Footprint U17,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,14,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',86.0,82.265,Footprint R85,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,15,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',116.3,58.25,Footprint C111,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,16,lib_footprint_mismatch,warning,Footprint 'Crystal_SMD_3215-2Pin_3.2x1.5mm' does not match copy in library 'Crystal',132.05,73.5,Footprint Y4,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,17,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',139.975,68.175,Footprint C113,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,18,lib_footprint_mismatch,warning,Footprint 'D_SOD-323' does not match copy in library 'Diode_SMD',73.15,69.0,Footprint D15,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,19,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',128.3,73.25,Footprint C110,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,20,lib_footprint_mismatch,warning,Footprint 'C_0805_2012Metric' does not match copy in library 'Capacitor_SMD',102.375,62.945,Footprint C91,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,21,lib_footprint_mismatch,warning,Footprint 'SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm' does not match copy in library 'Jumper',138.4,127.5,Footprint JP5,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,22,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',106.17,68.25,Footprint R87,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,23,lib_footprint_mismatch,warning,"Footprint 'PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Horizontal' does not match copy in library 'Connector_Phoenix_MC'",135.48,131.5675,Footprint P11,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,24,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',133.55,70.75,Footprint C116,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,25,lib_footprint_mismatch,warning,Footprint 'Crystal_SMD_HC49-SD' does not match copy in library 'Crystal',136.475,62.925,Footprint Y3,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,26,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',117.7,124.5,Footprint C80,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,27,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',113.675,106.25,Footprint C86,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,28,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',130.275,61.7796,Footprint C112,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,29,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',86.675,48.5,Footprint R84,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,30,lib_footprint_mismatch,warning,Footprint 'D_SOD-323' does not match copy in library 'Diode_SMD',72.5,77.0,Footprint D16,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,31,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',86.675,54.5,Footprint R95,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,32,lib_footprint_mismatch,warning,Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity',122.375,77.3,Footprint U3,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,33,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',78.25,76.75,Footprint R86,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,34,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',83.5,57.5,Footprint R97,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,35,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',86.0,80.0,Footprint R88,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,36,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',116.7,90.475,Footprint C82,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,37,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',139.975,57.675,Footprint C114,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,38,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',114.2,115.25,Footprint R90,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,39,lib_footprint_mismatch,warning,Footprint 'C_0805_2012Metric' does not match copy in library 'Capacitor_SMD',83.75,48.95,Footprint C94,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,40,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',136.15,127.67,Footprint R82,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,41,lib_footprint_mismatch,warning,Footprint 'PinHeader_1x04_P2.54mm_Vertical' does not match copy in library 'Connector_PinHeader_2.54mm',72.45,135.75,Footprint H4,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,42,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',86.675,58.5,Footprint C97,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,43,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',126.375,76.85,Footprint R81,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,44,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',128.95,101.775,Footprint C89,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,45,lib_footprint_mismatch,warning,Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST',119.25,43.965,Footprint P9,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,46,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',130.05,70.75,Footprint C115,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,47,lib_footprint_issues,warning,Footprint 'MountingHole_3.2mm' not found in library 'MountingHole',65.2,45.3,Footprint MH5,,,Local override,,,needs-fix-cosmetic,MountingHole library nickname not in fp-lib-table; board-only MH5-8 are fine for fab
|
|
DRC,48,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',113.775,59.0,Footprint C105,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,49,lib_footprint_mismatch,warning,Footprint 'C_0805_2012Metric' does not match copy in library 'Capacitor_SMD',78.5,73.05,Footprint C101,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,50,lib_footprint_mismatch,warning,"Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoen",167.5,135.0,Footprint P1,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,51,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',116.7,93.725,Footprint C83,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,52,lib_footprint_mismatch,warning,Footprint 'SOIC-8_3.9x4.9mm_P1.27mm' does not match copy in library 'Package_SO',122.025,84.9663,Footprint U14,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,53,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',126.75,83.8512,Footprint C84,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,54,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',113.675,108.25,Footprint C88,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,55,lib_footprint_issues,warning,Footprint 'MountingHole_3.2mm' not found in library 'MountingHole',195.2,45.3,Footprint MH7,,,Local override,,,needs-fix-cosmetic,MountingHole library nickname not in fp-lib-table; board-only MH5-8 are fine for fab
|
|
DRC,56,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',126.025,59.0,Footprint C106,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,57,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',116.7,87.0,Footprint R80,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,58,lib_footprint_mismatch,warning,Footprint 'LED_0603_1608Metric' does not match copy in library 'LED_SMD',132.6375,80.8171,Footprint D18,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,59,lib_footprint_mismatch,warning,Footprint 'LED_0603_1608Metric' does not match copy in library 'LED_SMD',132.5875,75.8171,Footprint D17,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,60,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',114.2,113.5,Footprint R89,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,61,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',112.45,102.975,Footprint C85,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,62,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',83.5,65.275,Footprint C95,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,63,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',114.2,117.0,Footprint R91,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,64,lib_footprint_mismatch,warning,Footprint 'SOIC-16W_7.5x10.3mm_P1.27mm' does not match copy in library 'Package_SO',122.2,118.0,Footprint U13,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,65,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',114.45,102.975,Footprint C87,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,66,lib_footprint_mismatch,warning,Footprint 'C_0805_2012Metric' does not match copy in library 'Capacitor_SMD',85.5,85.5,Footprint C117,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,67,lib_footprint_mismatch,warning,Footprint 'Crystal_SMD_HC49-SD' does not match copy in library 'Crystal',113.15,91.9013,Footprint Y2,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,68,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',113.0,72.5,Footprint C107,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,69,lib_footprint_mismatch,warning,Footprint 'Crystal_SMD_HC49-SD' does not match copy in library 'Crystal',91.5,65.5,Footprint Y1,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,70,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',104.5,62.725,Footprint C96,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,71,lib_footprint_issues,warning,Footprint 'MountingHole_3.2mm' not found in library 'MountingHole',65.2,135.3,Footprint MH6,,,Local override,,,needs-fix-cosmetic,MountingHole library nickname not in fp-lib-table; board-only MH5-8 are fine for fab
|
|
DRC,72,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',83.5,61.325,Footprint R96,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,73,lib_footprint_mismatch,warning,Footprint 'C_0805_2012Metric' does not match copy in library 'Capacitor_SMD',88.0,85.5,Footprint C118,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,74,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',86.675,56.5,Footprint R94,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,75,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',130.275,67.25,Footprint C104,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,76,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',86.675,52.5,Footprint R92,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,77,lib_footprint_mismatch,warning,Footprint 'C_0805_2012Metric' does not match copy in library 'Capacitor_SMD',100.0,62.945,Footprint C90,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,78,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',130.275,65.25,Footprint C109,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,79,lib_footprint_mismatch,warning,Footprint 'D_SOD-323' does not match copy in library 'Diode_SMD',72.5,72.5,Footprint D14,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,80,lib_footprint_mismatch,warning,Footprint 'TSSOP-28_4.4x9.7mm_P0.65mm' does not match copy in library 'Package_SO',122.3875,93.9762,Footprint U10,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,81,lib_footprint_mismatch,warning,Footprint 'SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm' does not match copy in library 'Package_SO',84.0,76.35,Footprint U12,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,82,lib_footprint_mismatch,warning,Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST',115.7,136.5,Footprint P10,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,83,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',75.825,77.5,Footprint C99,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,84,lib_footprint_mismatch,warning,"Footprint 'PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Horizontal' does not match copy in library 'Connector_Phoenix_MC'",122.155,131.5675,Footprint P12,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,85,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',84.3,72.75,Footprint C100,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,86,lib_footprint_mismatch,warning,Footprint 'C_0603_1608Metric' does not match copy in library 'Capacitor_SMD',128.3,76.45,Footprint C108,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,87,lib_footprint_mismatch,warning,Footprint 'R_0603_1608Metric' does not match copy in library 'Resistor_SMD',86.675,60.5,Footprint R83,,,Local override,,,pre-existing-benign,"board footprint differs from KiCad 10 library copy (library revisions); geometry verified by DRC/IPC-356; do NOT ""update footprints from library"" (would swap P11/P12, reset pads)"
|
|
DRC,88,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm),176.6,45.3,"Track [/SYS5V] on F.Cu, length 2.8850 mm",/SYS5V,0.8,T15 power width: PWR_HI >= 1.0 mm,2.89,F.Cu,pre-existing-benign,0.8 mm F.Cu capacity 2.03 A >= est. 0.6 A (U12+U17+K1+F9P rail: ~0.1+0.2+0.03+0.15 A); T15 rule over-strict for this net
|
|
DRC,89,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),88.215,75.715,"Track [/SYS5V] on F.Cu, length 0.0495 mm",/SYS5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.05,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.6 A (U12+U17+K1+F9P rail: ~0.1+0.2+0.03+0.15 A); T15 rule over-strict for this net
|
|
DRC,90,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),176.4,45.5,"Track [/SYS5V] on F.Cu, length 0.2828 mm",/SYS5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.28,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.6 A (U12+U17+K1+F9P rail: ~0.1+0.2+0.03+0.15 A); T15 rule over-strict for this net
|
|
DRC,91,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm),175.5,46.4,"Track [/SYS5V] on F.Cu, length 1.2728 mm",/SYS5V,0.8,T15 power width: PWR_HI >= 1.0 mm,1.27,F.Cu,pre-existing-benign,0.8 mm F.Cu capacity 2.03 A >= est. 0.6 A (U12+U17+K1+F9P rail: ~0.1+0.2+0.03+0.15 A); T15 rule over-strict for this net
|
|
DRC,92,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),181.0825,46.8975,"Track [/SYS5V] on F.Cu, length 0.2600 mm",/SYS5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.26,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.6 A (U12+U17+K1+F9P rail: ~0.1+0.2+0.03+0.15 A); T15 rule over-strict for this net
|
|
DRC,93,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm),179.485,45.3,"Track [/SYS5V] on F.Cu, length 2.2592 mm",/SYS5V,0.8,T15 power width: PWR_HI >= 1.0 mm,2.89,F.Cu,pre-existing-benign,0.8 mm F.Cu capacity 2.03 A >= est. 0.6 A (U12+U17+K1+F9P rail: ~0.1+0.2+0.03+0.15 A); T15 rule over-strict for this net
|
|
DRC,94,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),136.25,98.765,"Track [/SW_FAN] on F.Cu, length 1.0150 mm",/SW_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,1.02,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net
|
|
DRC,95,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),144.75,93.25,"Track [/SW_FAN] on F.Cu, length 3.1820 mm",/SW_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,3.18,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net
|
|
DRC,96,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),138.12,99.92,"Track [/SW_FAN] on F.Cu, length 2.3052 mm",/SW_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,2.31,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net
|
|
DRC,97,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),137.405,99.92,"Track [/SW_FAN] on F.Cu, length 1.6334 mm",/SW_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,1.63,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net
|
|
DRC,98,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),136.25,97.75,"Track [/SW_FAN] on F.Cu, length 6.3640 mm",/SW_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,1.02,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net
|
|
DRC,99,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),137.405,99.92,"Track [/SW_FAN] on F.Cu, length 0.7150 mm",/SW_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,1.63,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net
|
|
DRC,100,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),147.0,95.5,"Track [/SW_FAN] on F.Cu, length 1.7450 mm",/SW_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,3.18,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net
|
|
DRC,101,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),140.75,93.25,"Track [/SW_FAN] on F.Cu, length 4.0000 mm",/SW_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,6.36,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan buck switch node); T15 rule over-strict for this net
|
|
DRC,102,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),93.2375,54.58,"Track [/3V3_ETH] on F.Cu, length 0.0177 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,2.14,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,103,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),79.25,56.335,"Track [/3V3_ETH] on F.Cu, length 1.8243 mm",/3V3_ETH,0.5,T15 power width: PWR_MID >= 0.6 mm,1.82,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,104,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),83.5,56.675,"Track [/3V3_ETH] on F.Cu, length 1.4142 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,1.41,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,105,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),94.4125,60.4125,"Track [/3V3_ETH] on F.Cu, length 2.4200 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,2.42,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,106,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),92.5,60.5,"Track [/3V3_ETH] on F.Cu, length 2.0000 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,2.0,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,107,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),84.5,59.5,"Track [/3V3_ETH] on F.Cu, length 1.4142 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,1.41,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,108,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),99.325,55.08,"Track [/3V3_ETH] on F.Cu, length 2.7699 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,2.77,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,109,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),84.5,57.675,"Track [/3V3_ETH] on F.Cu, length 1.8250 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,1.41,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,110,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),85.15,54.8086,"Track [/3V3_ETH] on F.Cu, length 1.6086 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,1.61,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,111,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),96.4125,57.2226,"Track [/3V3_ETH] on F.Cu, length 0.7699 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,0.77,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,112,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),94.4125,57.2226,"Track [/3V3_ETH] on F.Cu, length 0.3784 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,0.77,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,113,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),94.5,60.5,"Track [/3V3_ETH] on F.Cu, length 1.2500 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,2.0,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,114,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),83.75,48.0,"Track [/3V3_ETH] on F.Cu, length 1.6000 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,1.6,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,115,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),93.4125,57.9925,"Track [/3V3_ETH] on F.Cu, length 0.7699 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,0.77,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,116,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),83.75,52.5,"Track [/3V3_ETH] on F.Cu, length 2.1000 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,2.1,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,117,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),91.0,52.58,"Track [/3V3_ETH] on F.Cu, length 1.5346 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,1.53,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,118,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),84.9378,55.0208,"Track [/3V3_ETH] on F.Cu, length 0.3001 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,0.22,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,119,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),85.15,53.2,"Track [/3V3_ETH] on F.Cu, length 0.9899 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,1.61,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,120,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),96.1449,56.955,"Track [/3V3_ETH] on F.Cu, length 0.3784 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,1.46,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,121,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),100.305,55.08,"Track [/3V3_ETH] on F.Cu, length 0.9800 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,0.98,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,122,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),101.5,56.725,"Track [/3V3_ETH] on F.Cu, length 0.4500 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,0.45,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,123,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),101.5,56.275,"Track [/3V3_ETH] on F.Cu, length 1.6900 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,0.45,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,124,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),85.85,48.5,"Track [/3V3_ETH] on F.Cu, length 4.0000 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,4.0,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,125,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),96.5551,55.08,"Track [/3V3_ETH] on F.Cu, length 2.6517 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,2.77,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,126,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),88.5723,52.58,"Track [/3V3_ETH] on F.Cu, length 0.9475 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,2.43,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,127,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),94.5,60.5,"Track [/3V3_ETH] on F.Cu, length 0.1237 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,2.0,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,128,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),83.5,56.675,"Track [/3V3_ETH] on F.Cu, length 2.0334 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,1.41,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,129,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),82.55,57.625,"Track [/3V3_ETH] on F.Cu, length 1.3435 mm",/3V3_ETH,0.5,T15 power width: PWR_MID >= 0.6 mm,1.34,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,130,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),79.4,44.0,"Track [/3V3_ETH] on F.Cu, length 0.2121 mm",/3V3_ETH,0.5,T15 power width: PWR_MID >= 0.6 mm,0.21,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,131,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),94.4125,57.9925,"Track [/3V3_ETH] on F.Cu, length 0.7699 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,0.77,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,132,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),85.35,48.0,"Track [/3V3_ETH] on F.Cu, length 0.7071 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,1.6,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,133,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),86.6,53.25,"Track [/3V3_ETH] on F.Cu, length 1.0607 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,1.06,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,134,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),93.6801,56.955,"Track [/3V3_ETH] on F.Cu, length 1.0000 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,1.0,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,135,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),93.4125,57.2226,"Track [/3V3_ETH] on F.Cu, length 0.3784 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,0.77,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,136,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),91.0,54.58,"Track [/3V3_ETH] on F.Cu, length 2.2375 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,2.24,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,137,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),84.9378,55.2372,"Track [/3V3_ETH] on F.Cu, length 0.2164 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,2.03,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,138,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),79.25,44.15,"Track [/3V3_ETH] on F.Cu, length 12.1850 mm",/3V3_ETH,0.5,T15 power width: PWR_MID >= 0.6 mm,0.21,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,139,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),80.54,57.625,"Track [/3V3_ETH] on F.Cu, length 2.0100 mm",/3V3_ETH,0.5,T15 power width: PWR_MID >= 0.6 mm,1.82,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,140,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),93.25,54.5675,"Track [/3V3_ETH] on F.Cu, length 2.1390 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,0.02,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,141,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),93.25,53.2954,"Track [/3V3_ETH] on F.Cu, length 1.2721 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,1.01,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,142,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),92.5346,52.58,"Track [/3V3_ETH] on F.Cu, length 1.0117 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,1.01,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,143,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),91.0,52.58,"Track [/3V3_ETH] on F.Cu, length 2.4277 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,1.53,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,144,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),87.9023,53.25,"Track [/3V3_ETH] on F.Cu, length 1.3023 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,0.95,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,145,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),94.6801,56.955,"Track [/3V3_ETH] on F.Cu, length 1.4648 mm",/3V3_ETH,0.3,T15 power width: PWR_MID >= 0.6 mm,1.46,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,146,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.2500 mm),91.7375,56.08,"Track [/3V3_ETH] on F.Cu, length 0.7375 mm",/3V3_ETH,0.25,T15 power width: PWR_MID >= 0.6 mm,2.14,F.Cu,pre-existing-benign,0.25 mm F.Cu capacity 0.88 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,147,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),98.425,61.43,"Track [/3V3_ETH] on In1.Cu, length 12.1198 mm",/3V3_ETH,0.5,T15 power width: PWR_MID >= 0.6 mm,12.12,In1.Cu,pre-existing-benign,0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,148,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),95.75,60.5,"Track [/3V3_ETH] on In1.Cu, length 3.7830 mm",/3V3_ETH,0.5,T15 power width: PWR_MID >= 0.6 mm,3.78,In1.Cu,pre-existing-benign,0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,149,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),98.425,57.825,"Track [/3V3_ETH] on In1.Cu, length 3.6050 mm",/3V3_ETH,0.5,T15 power width: PWR_MID >= 0.6 mm,3.78,In1.Cu,pre-existing-benign,0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,150,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),85.017,55.1,"Track [/3V3_ETH] on In1.Cu, length 2.2766 mm",/3V3_ETH,0.5,T15 power width: PWR_MID >= 0.6 mm,0.11,In1.Cu,pre-existing-benign,0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,151,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),87.2936,55.1,"Track [/3V3_ETH] on In1.Cu, length 3.6770 mm",/3V3_ETH,0.5,T15 power width: PWR_MID >= 0.6 mm,2.28,In1.Cu,pre-existing-benign,0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,152,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),94.75,52.5,"Track [/3V3_ETH] on In1.Cu, length 5.1972 mm",/3V3_ETH,0.5,T15 power width: PWR_MID >= 0.6 mm,5.2,In1.Cu,pre-existing-benign,0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,153,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),98.425,56.175,"Track [/3V3_ETH] on In1.Cu, length 1.6500 mm",/3V3_ETH,0.5,T15 power width: PWR_MID >= 0.6 mm,5.2,In1.Cu,pre-existing-benign,0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,154,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),84.9378,55.0208,"Track [/3V3_ETH] on In1.Cu, length 0.1120 mm",/3V3_ETH,0.5,T15 power width: PWR_MID >= 0.6 mm,0.11,In1.Cu,pre-existing-benign,0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,155,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),89.8936,52.5,"Track [/3V3_ETH] on In1.Cu, length 4.8564 mm",/3V3_ETH,0.5,T15 power width: PWR_MID >= 0.6 mm,3.68,In1.Cu,pre-existing-benign,0.5 mm In1.Cu capacity 0.72 A >= est. 0.15 A (W5500 132 mA typ at 100M + RJ45 LEDs); T15 rule over-strict for this net
|
|
DRC,156,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm),193.4,103.6937,"Track [/BAT_PLUS] on F.Cu, length 4.9020 mm",/BAT_PLUS,0.25,T15 power width: PWR_HI >= 1.0 mm,4.9,F.Cu,real,0.25 mm F.Cu carries ~3.5 A vs IPC-2221 10C capacity 0.88 A (pack current: backup draw 5V*2.5A/(3.3V*0.9)=4.2 A peak; charge 2.42 A (R50 825R))
|
|
DRC,157,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),139.0,55.9,"Track [/BAT_PLUS] on F.Cu, length 0.2828 mm",/BAT_PLUS,0.5,T15 power width: PWR_HI >= 1.0 mm,0.28,F.Cu,real,0.5 mm F.Cu carries ~3.5 A vs IPC-2221 10C capacity 1.45 A (pack current: backup draw 5V*2.5A/(3.3V*0.9)=4.2 A peak; charge 2.42 A (R50 825R))
|
|
DRC,158,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm),189.9338,107.16,"Track [/BAT_PLUS] on F.Cu, length 0.4838 mm",/BAT_PLUS,0.25,T15 power width: PWR_HI >= 1.0 mm,4.9,F.Cu,real,0.25 mm F.Cu carries ~3.5 A vs IPC-2221 10C capacity 0.88 A (pack current: backup draw 5V*2.5A/(3.3V*0.9)=4.2 A peak; charge 2.42 A (R50 825R))
|
|
DRC,159,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),193.4,93.2,"Track [/BAT_PLUS] on F.Cu, length 10.4938 mm",/BAT_PLUS,0.5,T15 power width: PWR_HI >= 1.0 mm,10.49,F.Cu,real,0.5 mm F.Cu carries ~3.5 A vs IPC-2221 10C capacity 1.45 A (pack current: backup draw 5V*2.5A/(3.3V*0.9)=4.2 A peak; charge 2.42 A (R50 825R))
|
|
DRC,160,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.2500 mm),154.25,59.15,"Track [/VBAT_MODEM] on F.Cu, length 0.3536 mm",/VBAT_MODEM,0.25,T15 power width: modem + vehicle PSU paths >= 0.8 mm,0.35,F.Cu,real,"0.25 mm F.Cu carries ~2.0 A vs IPC-2221 10C capacity 0.88 A (A7670SA VBAT burst up to 2 A (GSM TX), LTE ~1 A)"
|
|
DRC,161,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.2500 mm),154.25,59.75,"Track [/VBAT_MODEM] on F.Cu, length 0.6000 mm",/VBAT_MODEM,0.25,T15 power width: modem + vehicle PSU paths >= 0.8 mm,0.6,F.Cu,real,"0.25 mm F.Cu carries ~2.0 A vs IPC-2221 10C capacity 0.88 A (A7670SA VBAT burst up to 2 A (GSM TX), LTE ~1 A)"
|
|
DRC,162,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),179.75,57.0,"Track [/VBAT_MODEM] on F.Cu, length 0.7071 mm",/VBAT_MODEM,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,0.71,F.Cu,real,"0.5 mm F.Cu carries ~2.0 A vs IPC-2221 10C capacity 1.45 A (A7670SA VBAT burst up to 2 A (GSM TX), LTE ~1 A)"
|
|
DRC,163,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),179.25,57.5,"Track [/VBAT_MODEM] on F.Cu, length 2.5000 mm",/VBAT_MODEM,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,0.71,F.Cu,real,"0.5 mm F.Cu carries ~2.0 A vs IPC-2221 10C capacity 1.45 A (A7670SA VBAT burst up to 2 A (GSM TX), LTE ~1 A)"
|
|
DRC,164,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),179.25,60.0,"Track [/VBAT_MODEM] on F.Cu, length 2.0000 mm",/VBAT_MODEM,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,2.5,F.Cu,real,"0.5 mm F.Cu carries ~2.0 A vs IPC-2221 10C capacity 1.45 A (A7670SA VBAT burst up to 2 A (GSM TX), LTE ~1 A)"
|
|
DRC,165,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),154.0,58.9,"Track [/VBAT_MODEM] on In1.Cu, length 0.6718 mm",/VBAT_MODEM,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,0.67,In1.Cu,real,"0.5 mm In1.Cu carries ~2.0 A vs IPC-2221 10C capacity 0.72 A (A7670SA VBAT burst up to 2 A (GSM TX), LTE ~1 A)"
|
|
DRC,166,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),154.475,58.425,"Track [/VBAT_MODEM] on In1.Cu, length 5.6000 mm",/VBAT_MODEM,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,0.67,In1.Cu,real,"0.5 mm In1.Cu carries ~2.0 A vs IPC-2221 10C capacity 0.72 A (A7670SA VBAT burst up to 2 A (GSM TX), LTE ~1 A)"
|
|
DRC,167,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),147.75,103.75,"Track [/5V_FAN] on F.Cu, length 0.9899 mm",/5V_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,0.99,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net
|
|
DRC,168,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),160.25,104.5,"Track [/5V_FAN] on F.Cu, length 2.0500 mm",/5V_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,2.05,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net
|
|
DRC,169,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),174.275,100.975,"Track [/5V_FAN] on F.Cu, length 3.0759 mm",/5V_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,3.08,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net
|
|
DRC,170,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),144.3,104.45,"Track [/5V_FAN] on F.Cu, length 1.1314 mm",/5V_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,1.13,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net
|
|
DRC,171,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),147.05,104.45,"Track [/5V_FAN] on F.Cu, length 2.7500 mm",/5V_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,0.99,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net
|
|
DRC,172,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),176.45,98.8,"Track [/5V_FAN] on F.Cu, length 1.3000 mm",/5V_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,3.08,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net
|
|
DRC,173,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),174.25,98.55,"Track [/5V_FAN] on B.Cu, length 38.0500 mm",/5V_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,38.05,B.Cu,pre-existing-benign,0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net
|
|
DRC,174,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),174.25,60.5,"Track [/5V_FAN] on B.Cu, length 25.7387 mm",/5V_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,38.05,B.Cu,pre-existing-benign,0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net
|
|
DRC,175,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),156.05,42.3,"Track [/5V_FAN] on B.Cu, length 2.6500 mm",/5V_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,25.74,B.Cu,pre-existing-benign,0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net
|
|
DRC,176,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),174.275,100.975,"Track [/5V_FAN] on B.Cu, length 2.4000 mm",/5V_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,3.08,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net
|
|
DRC,177,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),153.4,42.3,"Track [/5V_FAN] on B.Cu, length 2.3335 mm",/5V_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,2.65,B.Cu,pre-existing-benign,0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net
|
|
DRC,178,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),174.275,98.575,"Track [/5V_FAN] on B.Cu, length 0.0354 mm",/5V_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,2.4,B.Cu,pre-existing-benign,0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net
|
|
DRC,179,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),174.275,100.975,"Track [/5V_FAN] on In1.Cu, length 4.9851 mm",/5V_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,3.08,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net
|
|
DRC,180,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),170.75,104.5,"Track [/5V_FAN] on In1.Cu, length 12.5500 mm",/5V_FAN,0.5,T15 power width: PWR_MID >= 0.6 mm,4.99,In1.Cu,pre-existing-benign,0.5 mm In1.Cu capacity 0.72 A >= est. 0.3 A (2-pin 5 V fan (assumed <=0.3 A)); T15 rule over-strict for this net
|
|
DRC,181,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),161.6875,98.5,"Track [/FAN_RET] on F.Cu, length 0.8125 mm",/FAN_RET,0.5,T15 power width: PWR_MID >= 0.6 mm,0.81,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan low-side return); T15 rule over-strict for this net
|
|
DRC,182,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),161.6875,99.3125,"Track [/FAN_RET] on F.Cu, length 1.6794 mm",/FAN_RET,0.5,T15 power width: PWR_MID >= 0.6 mm,0.81,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan low-side return); T15 rule over-strict for this net
|
|
DRC,183,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),161.6875,98.5,"Track [/FAN_RET] on F.Cu, length 1.5000 mm",/FAN_RET,0.5,T15 power width: PWR_MID >= 0.6 mm,0.81,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan low-side return); T15 rule over-strict for this net
|
|
DRC,184,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),164.0,53.7,"Track [/FAN_RET] on B.Cu, length 13.7886 mm",/FAN_RET,0.5,T15 power width: PWR_MID >= 0.6 mm,13.79,B.Cu,pre-existing-benign,0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (fan low-side return); T15 rule over-strict for this net
|
|
DRC,185,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),164.0,93.1,"Track [/FAN_RET] on B.Cu, length 39.4000 mm",/FAN_RET,0.5,T15 power width: PWR_MID >= 0.6 mm,39.4,B.Cu,pre-existing-benign,0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (fan low-side return); T15 rule over-strict for this net
|
|
DRC,186,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),161.6875,98.5,"Track [/FAN_RET] on B.Cu, length 3.0875 mm",/FAN_RET,0.5,T15 power width: PWR_MID >= 0.6 mm,0.81,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.3 A (fan low-side return); T15 rule over-strict for this net
|
|
DRC,187,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),161.6875,95.4125,"Track [/FAN_RET] on B.Cu, length 3.2704 mm",/FAN_RET,0.5,T15 power width: PWR_MID >= 0.6 mm,3.09,B.Cu,pre-existing-benign,0.5 mm B.Cu capacity 1.45 A >= est. 0.3 A (fan low-side return); T15 rule over-strict for this net
|
|
DRC,188,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm),187.0,111.0,"Track [/VEH5V] on F.Cu, length 1.3900 mm",/VEH5V,0.25,T15 power width: PWR_HI >= 1.0 mm,1.39,F.Cu,pre-existing-benign,1.39 mm neck at U6 pin (pad-limited)
|
|
DRC,189,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),176.8,116.5,"Track [/VEH5V] on F.Cu, length 0.2000 mm",/VEH5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.2,F.Cu,real,"0.5 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 1.45 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path)"
|
|
DRC,190,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),169.27,123.65,"Track [/VEH5V] on F.Cu, length 0.1838 mm",/VEH5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.18,F.Cu,real,"0.5 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 1.45 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path)"
|
|
DRC,191,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),186.0,105.0375,"Track [/VEH5V] on F.Cu, length 0.1688 mm",/VEH5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.17,F.Cu,pre-existing-benign,0.17 mm neck at U6 pin (pad-limited)
|
|
DRC,192,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),183.5,113.45,"Track [/VEH5V] on F.Cu, length 1.0500 mm",/VEH5V,0.5,T15 power width: PWR_HI >= 1.0 mm,1.05,F.Cu,real,"0.5 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 1.45 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path)"
|
|
DRC,193,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.3000 mm),186.0,105.8,"Track [/VEH5V] on F.Cu, length 0.7625 mm",/VEH5V,0.3,T15 power width: PWR_HI >= 1.0 mm,0.76,F.Cu,pre-existing-benign,0.76 mm neck at U6 pin (pad-limited)
|
|
DRC,194,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),179.65,113.45,"Track [/VEH5V] on F.Cu, length 0.3500 mm",/VEH5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.35,F.Cu,real,"0.5 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 1.45 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path)"
|
|
DRC,195,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm),185.475,112.525,"Track [/VEH5V] on F.Cu, length 2.1567 mm",/VEH5V,0.25,T15 power width: PWR_HI >= 1.0 mm,2.16,F.Cu,real,"0.25 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 0.88 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path)"
|
|
DRC,196,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm),176.8,116.3,"Track [/VEH5V] on F.Cu, length 4.0305 mm",/VEH5V,0.8,T15 power width: PWR_HI >= 1.0 mm,4.03,F.Cu,real,"0.8 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 2.03 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path)"
|
|
DRC,197,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),186.0,104.8688,"Track [/VEH5V] on F.Cu, length 5.0647 mm",/VEH5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.17,F.Cu,pre-existing-benign,0.17 mm neck at U6 pin (pad-limited)
|
|
DRC,198,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),182.4187,101.2875,"Track [/VEH5V] on F.Cu, length 0.1688 mm",/VEH5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.17,F.Cu,real,"0.5 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 1.45 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path)"
|
|
DRC,199,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),184.55,113.45,"Track [/VEH5V] on F.Cu, length 1.3081 mm",/VEH5V,0.5,T15 power width: PWR_HI >= 1.0 mm,1.05,F.Cu,real,"0.5 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 1.45 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path)"
|
|
DRC,200,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.3000 mm),184.575,114.525,"Track [/VEH5V] on F.Cu, length 1.5203 mm",/VEH5V,0.3,T15 power width: PWR_HI >= 1.0 mm,1.52,F.Cu,real,"0.3 mm F.Cu carries ~3.0 A vs IPC-2221 10C capacity 1.00 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path)"
|
|
DRC,201,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),181.1438,111.0938,"Track [/VEH5V] on In1.Cu, length 8.7000 mm",/VEH5V,0.5,T15 power width: PWR_HI >= 1.0 mm,4.85,In1.Cu,real,"0.5 mm In1.Cu carries ~3.0 A vs IPC-2221 10C capacity 0.72 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path)"
|
|
DRC,202,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),184.575,114.525,"Track [/VEH5V] on In1.Cu, length 4.8525 mm",/VEH5V,0.5,T15 power width: PWR_HI >= 1.0 mm,4.85,In1.Cu,real,"0.5 mm In1.Cu carries ~3.0 A vs IPC-2221 10C capacity 0.72 A (U25 5 V output, 3 A rated; feeds LTC4040 input (<=2.5 A via RS1) + modem path)"
|
|
DRC,203,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),179.2,108.6,"Track [/MAIN5V] on F.Cu, length 0.0707 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.07,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,204,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),174.25,98.255,"Track [/MAIN5V] on F.Cu, length 0.7550 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.75,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,205,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.3000 mm),188.5,105.71,"Track [/MAIN5V] on F.Cu, length 0.3000 mm",/MAIN5V,0.3,T15 power width: PWR_HI >= 1.0 mm,0.3,F.Cu,pre-existing-benign,0.30 mm neck at U6 pin (pad-limited)
|
|
DRC,206,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.3000 mm),188.8,105.71,"Track [/MAIN5V] on F.Cu, length 0.9192 mm",/MAIN5V,0.3,T15 power width: PWR_HI >= 1.0 mm,0.3,F.Cu,pre-existing-benign,0.30 mm neck at U6 pin (pad-limited)
|
|
DRC,207,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),178.3,127.6,"Track [/MAIN5V] on F.Cu, length 0.1414 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.14,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,208,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),187.4,101.265,"Track [/MAIN5V] on F.Cu, length 0.2970 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.3,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,209,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),187.19,97.7138,"Track [/MAIN5V] on F.Cu, length 2.9965 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,3.0,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,210,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),169.0,103.25,"Track [/MAIN5V] on F.Cu, length 0.2550 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.25,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,211,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),169.255,103.25,"Track [/MAIN5V] on F.Cu, length 7.0640 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.25,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,212,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),179.15,108.55,"Track [/MAIN5V] on F.Cu, length 1.0500 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.07,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,213,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.3000 mm),189.45,106.36,"Track [/MAIN5V] on F.Cu, length 0.3000 mm",/MAIN5V,0.3,T15 power width: PWR_HI >= 1.0 mm,0.92,F.Cu,real,0.3 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.00 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,214,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),190.75,102.25,"Track [/MAIN5V] on F.Cu, length 1.7678 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,1.77,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,215,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),190.75,105.36,"Track [/MAIN5V] on F.Cu, length 1.8031 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,1.8,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,216,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),169.0,99.63,"Track [/MAIN5V] on F.Cu, length 0.3182 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.32,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,217,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),169.0,103.25,"Track [/MAIN5V] on F.Cu, length 3.6200 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.25,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,218,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),187.19,101.055,"Track [/MAIN5V] on F.Cu, length 3.3412 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.3,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,219,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),179.2,109.7,"Track [/MAIN5V] on F.Cu, length 1.1000 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,1.1,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,220,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),189.475,106.635,"Track [/MAIN5V] on F.Cu, length 0.0250 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,1.8,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,221,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),190.75,105.36,"Track [/MAIN5V] on F.Cu, length 3.1100 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,1.8,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,222,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),176.435,127.6,"Track [/MAIN5V] on F.Cu, length 1.8650 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,1.87,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,223,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),178.4,127.5,"Track [/MAIN5V] on In1.Cu, length 0.2828 mm",/MAIN5V,0.5,T15 power width: PWR_HI >= 1.0 mm,0.14,F.Cu,real,0.5 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.45 A (LTC4040 output: whole 5 V system in backup (boost limit ~2.5 A))
|
|
DRC,224,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),175.63,116.17,"Track [/VIN_PROT] on F.Cu, length 1.7300 mm",/VIN_PROT,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,1.73,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.8 A (U25 input at 24 V: 5 V*3 A/0.9/24 V = 0.7 A (1.1 A at 16 V)); T15 rule over-strict for this net
|
|
DRC,225,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),175.63,117.9,"Track [/VIN_PROT] on F.Cu, length 0.2828 mm",/VIN_PROT,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,1.73,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.8 A (U25 input at 24 V: 5 V*3 A/0.9/24 V = 0.7 A (1.1 A at 16 V)); T15 rule over-strict for this net
|
|
DRC,226,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),176.2,113.1,"Track [/VIN_PROT] on F.Cu, length 2.8284 mm",/VIN_PROT,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,2.83,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.8 A (U25 input at 24 V: 5 V*3 A/0.9/24 V = 0.7 A (1.1 A at 16 V)); T15 rule over-strict for this net
|
|
DRC,227,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),174.2,115.1,"Track [/VIN_PROT] on F.Cu, length 5.2500 mm",/VIN_PROT,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,2.83,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.8 A (U25 input at 24 V: 5 V*3 A/0.9/24 V = 0.7 A (1.1 A at 16 V)); T15 rule over-strict for this net
|
|
DRC,228,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),168.95,115.1,"Track [/VIN_PROT] on F.Cu, length 1.6263 mm",/VIN_PROT,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,5.25,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.8 A (U25 input at 24 V: 5 V*3 A/0.9/24 V = 0.7 A (1.1 A at 16 V)); T15 rule over-strict for this net
|
|
DRC,229,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),192.8125,60.1125,"Track [/SW_IN] on F.Cu, length 1.2291 mm",/SW_IN,0.3,T15 power width: PWR_MID >= 0.6 mm,1.23,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.2 A (F1 output -> Q1 (F9P rail)); T15 rule over-strict for this net
|
|
DRC,230,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),190.65,53.75,"Track [/SW_IN] on F.Cu, length 0.2121 mm",/SW_IN,0.5,T15 power width: PWR_MID >= 0.6 mm,0.21,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F1 output -> Q1 (F9P rail)); T15 rule over-strict for this net
|
|
DRC,231,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),195.4125,61.6875,"Track [/SW_IN] on F.Cu, length 1.3081 mm",/SW_IN,0.5,T15 power width: PWR_MID >= 0.6 mm,1.31,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F1 output -> Q1 (F9P rail)); T15 rule over-strict for this net
|
|
DRC,232,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),195.4,61.7,"Track [/SW_IN] on F.Cu, length 0.0177 mm",/SW_IN,0.3,T15 power width: PWR_MID >= 0.6 mm,0.02,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.2 A (F1 output -> Q1 (F9P rail)); T15 rule over-strict for this net
|
|
DRC,233,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),192.8125,61.3416,"Track [/SW_IN] on F.Cu, length 0.5069 mm",/SW_IN,0.3,T15 power width: PWR_MID >= 0.6 mm,0.51,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.2 A (F1 output -> Q1 (F9P rail)); T15 rule over-strict for this net
|
|
DRC,234,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),191.4,58.7,"Track [/SW_IN] on F.Cu, length 1.9976 mm",/SW_IN,0.5,T15 power width: PWR_MID >= 0.6 mm,2.0,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F1 output -> Q1 (F9P rail)); T15 rule over-strict for this net
|
|
DRC,235,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),193.1709,61.7,"Track [/SW_IN] on F.Cu, length 2.2291 mm",/SW_IN,0.5,T15 power width: PWR_MID >= 0.6 mm,2.23,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F1 output -> Q1 (F9P rail)); T15 rule over-strict for this net
|
|
DRC,236,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),84.125,121.9313,"Track [/SW_5V] on F.Cu, length 1.3188 mm",/SW_5V,0.5,T15 power width: PWR_MID >= 0.6 mm,1.32,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net
|
|
DRC,237,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),198.2125,59.8125,"Track [/SW_5V] on F.Cu, length 0.8309 mm",/SW_5V,0.5,T15 power width: PWR_MID >= 0.6 mm,0.83,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net
|
|
DRC,238,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),84.125,123.25,"Track [/SW_5V] on F.Cu, length 1.3562 mm",/SW_5V,0.5,T15 power width: PWR_MID >= 0.6 mm,1.32,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net
|
|
DRC,239,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),88.35,121.8812,"Track [/SW_5V] on F.Cu, length 2.0000 mm",/SW_5V,0.5,T15 power width: PWR_MID >= 0.6 mm,2.0,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net
|
|
DRC,240,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),82.5406,126.2406,"Track [/SW_5V] on F.Cu, length 3.5187 mm",/SW_5V,0.3,T15 power width: PWR_MID >= 0.6 mm,3.52,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net
|
|
DRC,241,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),88.35,123.95,"Track [/SW_5V] on F.Cu, length 2.0688 mm",/SW_5V,0.3,T15 power width: PWR_MID >= 0.6 mm,2.07,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net
|
|
DRC,242,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),198.8,60.4,"Track [/SW_5V] on F.Cu, length 0.5000 mm",/SW_5V,0.5,T15 power width: PWR_MID >= 0.6 mm,0.83,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net
|
|
DRC,243,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.3000 mm),86.0594,126.2406,"Track [/SW_5V] on F.Cu, length 3.2394 mm",/SW_5V,0.3,T15 power width: PWR_MID >= 0.6 mm,3.24,F.Cu,pre-existing-benign,0.3 mm F.Cu capacity 1.00 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net
|
|
DRC,244,track_width,warning,Track width (rule 'T15 power width: PWR_MID >= 0.6 mm' min width 0.6000 mm; actual 0.5000 mm),84.125,124.6063,"Track [/SW_5V] on F.Cu, length 0.0354 mm",/SW_5V,0.5,T15 power width: PWR_MID >= 0.6 mm,0.04,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.2 A (F9P rail through Q1: ZED-F9P ~70-100 mA + active antenna 20-30 mA); T15 rule over-strict for this net
|
|
DRC,245,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm),185.5,105.71,"Track [/VIN_SW] on F.Cu, length 0.5100 mm",/VIN_SW,0.25,T15 power width: PWR_HI >= 1.0 mm,0.51,F.Cu,pre-existing-benign,0.51 mm neck at U6 pin (pad-limited)
|
|
DRC,246,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm),184.5125,104.2125,"Track [/VIN_SW] on F.Cu, length 0.6000 mm",/VIN_SW,0.25,T15 power width: PWR_HI >= 1.0 mm,0.6,F.Cu,real,0.25 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 0.88 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A)
|
|
DRC,247,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm),182.25,104.2125,"Track [/VIN_SW] on F.Cu, length 1.6625 mm",/VIN_SW,0.8,T15 power width: PWR_HI >= 1.0 mm,1.66,F.Cu,real,0.8 mm F.Cu carries ~2.5 A vs IPC-2221 10C capacity 2.03 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A)
|
|
DRC,248,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm),185.5,105.2,"Track [/VIN_SW] on F.Cu, length 1.3965 mm",/VIN_SW,0.25,T15 power width: PWR_HI >= 1.0 mm,0.51,F.Cu,pre-existing-benign,0.51 mm neck at U6 pin (pad-limited)
|
|
DRC,249,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm),167.275,99.3,"Track [/VIN_SW] on In2.Cu, length 4.2426 mm",/VIN_SW,0.8,T15 power width: PWR_HI >= 1.0 mm,4.24,In2.Cu,real,0.8 mm In2.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.02 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A)
|
|
DRC,250,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm),180.6,99.7,"Track [/VIN_SW] on In2.Cu, length 4.6846 mm",/VIN_SW,0.8,T15 power width: PWR_HI >= 1.0 mm,4.68,In2.Cu,real,0.8 mm In2.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.02 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A)
|
|
DRC,251,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm),167.275,99.3,"Track [/VIN_SW] on In2.Cu, length 0.5657 mm",/VIN_SW,0.8,T15 power width: PWR_HI >= 1.0 mm,4.24,In2.Cu,real,0.8 mm In2.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.02 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A)
|
|
DRC,252,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm),183.9125,103.0125,"Track [/VIN_SW] on In2.Cu, length 1.2000 mm",/VIN_SW,0.8,T15 power width: PWR_HI >= 1.0 mm,4.68,In2.Cu,real,0.8 mm In2.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.02 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A)
|
|
DRC,253,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.8000 mm),167.675,99.7,"Track [/VIN_SW] on In2.Cu, length 12.9250 mm",/VIN_SW,0.8,T15 power width: PWR_HI >= 1.0 mm,0.57,In2.Cu,real,0.8 mm In2.Cu carries ~2.5 A vs IPC-2221 10C capacity 1.02 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A)
|
|
DRC,254,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),183.9125,104.0311,"Track [/VIN_SW] on In2.Cu, length 0.1814 mm",/VIN_SW,0.5,T15 power width: PWR_HI >= 1.0 mm,0.18,In2.Cu,real,0.5 mm In2.Cu carries ~2.5 A vs IPC-2221 10C capacity 0.72 A (after RS1: LTC4040 input current limit 25 mV/10 mOhm = 2.5 A)
|
|
DRC,255,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),145.2,62.575,"Track [/VIN_MODEM] on F.Cu, length 0.7000 mm",/VIN_MODEM,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,0.7,F.Cu,pre-existing-benign,0.70 mm neck at U20 pin (pad-limited)
|
|
DRC,256,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),142.5,62.48,"Track [/VIN_MODEM] on F.Cu, length 1.9050 mm",/VIN_MODEM,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,1.91,F.Cu,real,0.5 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.45 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V))
|
|
DRC,257,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),142.5,62.48,"Track [/VIN_MODEM] on F.Cu, length 1.5300 mm",/VIN_MODEM,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,1.91,F.Cu,real,0.5 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.45 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V))
|
|
DRC,258,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),140.97,62.48,"Track [/VIN_MODEM] on F.Cu, length 0.5233 mm",/VIN_MODEM,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,1.53,F.Cu,real,0.5 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.45 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V))
|
|
DRC,259,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),144.405,62.48,"Track [/VIN_MODEM] on F.Cu, length 0.1344 mm",/VIN_MODEM,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,1.91,F.Cu,real,0.5 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.45 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V))
|
|
DRC,260,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),146.2,68.5,"Track [/VIN_MODEM] on F.Cu, length 0.4950 mm",/VIN_MODEM,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,0.49,F.Cu,real,0.5 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.45 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V))
|
|
DRC,261,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),145.8,68.1,"Track [/VIN_MODEM] on F.Cu, length 4.9250 mm",/VIN_MODEM,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,4.92,F.Cu,real,0.5 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.45 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V))
|
|
DRC,262,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.3000 mm),145.85,68.15,"Track [/VIN_MODEM] on F.Cu, length 0.0707 mm",/VIN_MODEM,0.3,T15 power width: modem + vehicle PSU paths >= 0.8 mm,0.07,F.Cu,real,0.3 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.00 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V))
|
|
DRC,263,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),145.8,63.175,"Track [/VIN_MODEM] on F.Cu, length 0.8485 mm",/VIN_MODEM,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,4.92,F.Cu,real,0.5 mm F.Cu carries ~1.9 A vs IPC-2221 10C capacity 1.45 A (U20 input on battery: 3.8 V*2 A/0.9/4.5 V = 1.9 A peak (0.35 A at 24 V))
|
|
DRC,264,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm),189.45,107.9,"Track [/SW_BAT] on F.Cu, length 0.2400 mm",/SW_BAT,0.25,T15 power width: PWR_HI >= 1.0 mm,0.24,F.Cu,pre-existing-benign,0.24 mm neck at U6 pin (pad-limited)
|
|
DRC,265,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.2500 mm),189.45,108.16,"Track [/SW_BAT] on F.Cu, length 0.2600 mm",/SW_BAT,0.25,T15 power width: PWR_HI >= 1.0 mm,0.26,F.Cu,pre-existing-benign,0.26 mm neck at U6 pin (pad-limited)
|
|
DRC,266,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),190.113,107.9,"Track [/SW_BAT] on F.Cu, length 7.6184 mm",/SW_BAT,0.5,T15 power width: PWR_HI >= 1.0 mm,7.62,F.Cu,real,"0.5 mm F.Cu carries ~4.0 A vs IPC-2221 10C capacity 1.45 A (LTC4040 boost switch, ~4 A in backup (5 V/2.5 A from 3.2-3.7 V pack) - V5 EMC audit)"
|
|
DRC,267,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),189.45,107.9,"Track [/SW_BAT] on F.Cu, length 0.6630 mm",/SW_BAT,0.5,T15 power width: PWR_HI >= 1.0 mm,0.66,F.Cu,pre-existing-benign,0.66 mm neck at U6 pin (pad-limited)
|
|
DRC,268,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.3000 mm),189.45,108.16,"Track [/SW_BAT] on F.Cu, length 0.5000 mm",/SW_BAT,0.3,T15 power width: PWR_HI >= 1.0 mm,0.5,F.Cu,pre-existing-benign,0.50 mm neck at U6 pin (pad-limited)
|
|
DRC,269,track_width,warning,Track width (rule 'T15 power width: PWR_HI >= 1.0 mm' min width 1.0000 mm; actual 0.5000 mm),195.5,102.513,"Track [/SW_BAT] on F.Cu, length 3.6130 mm",/SW_BAT,0.5,T15 power width: PWR_HI >= 1.0 mm,7.62,F.Cu,real,"0.5 mm F.Cu carries ~4.0 A vs IPC-2221 10C capacity 1.45 A (LTC4040 boost switch, ~4 A in backup (5 V/2.5 A from 3.2-3.7 V pack) - V5 EMC audit)"
|
|
DRC,270,track_width,warning,Track width (rule 'T15 power width: modem + vehicle PSU paths >= 0.8 mm' min width 0.8000 mm; actual 0.5000 mm),153.9,121.9,"Track [/VIN_FUSED] on F.Cu, length 1.4725 mm",/VIN_FUSED,0.5,T15 power width: modem + vehicle PSU paths >= 0.8 mm,1.47,F.Cu,pre-existing-benign,0.5 mm F.Cu capacity 1.45 A >= est. 0.8 A (same as VIN_PROT); T15 rule over-strict for this net
|
|
DRC,271,silk_overlap,warning,Silkscreen clearance,70.6,127.075,Reference field of D27,,,board setup constraints silk,,,needs-fix-cosmetic,silkscreen legibility; JLC clips silk on pads/edge automatically
|
|
DRC,272,silk_overlap,warning,Silkscreen clearance,70.23,127.555,Segment of D27 on F.Silkscreen,,,board setup constraints silk,,,needs-fix-cosmetic,silkscreen legibility; JLC clips silk on pads/edge automatically
|
|
DRC,273,silk_overlap,warning,Silkscreen clearance,118.5225,58.4873,Segment of R99 on F.Silkscreen,,,board setup constraints silk,,,needs-fix-cosmetic,silkscreen legibility; JLC clips silk on pads/edge automatically
|
|
DRC,274,silk_overlap,warning,Silkscreen clearance,187.25,80.75,Reference field of C126,,,board setup constraints silk,,,needs-fix-cosmetic,silkscreen legibility; JLC clips silk on pads/edge automatically
|
|
DRC,275,silk_overlap,warning,Silkscreen clearance,161.5,83.5,Reference field of Q21,,,board setup constraints silk,,,needs-fix-cosmetic,silkscreen legibility; JLC clips silk on pads/edge automatically
|
|
DRC,276,silk_overlap,warning,Silkscreen clearance,171.45,99.0,Segment of JP3 on F.Silkscreen,,,board setup constraints silk,,,needs-fix-cosmetic,silkscreen legibility; JLC clips silk on pads/edge automatically
|
|
DRC,277,silk_overlap,warning,Silkscreen clearance,171.75,98.7,Segment of JP3 on F.Silkscreen,,,board setup constraints silk,,,needs-fix-cosmetic,silkscreen legibility; JLC clips silk on pads/edge automatically
|
|
DRC,278,silk_overlap,warning,Silkscreen clearance,155.75,73.98,Arc of U24 on F.Silkscreen,,,board setup constraints silk,,,needs-fix-cosmetic,silkscreen legibility; JLC clips silk on pads/edge automatically
|
|
DRC,279,silk_overlap,warning,Silkscreen clearance,155.6,69.77,Segment of U23 on F.Silkscreen,,,board setup constraints silk,,,needs-fix-cosmetic,silkscreen legibility; JLC clips silk on pads/edge automatically
|
|
DRC,280,silk_overlap,warning,Silkscreen clearance,137.05,125.17,Segment of Q10 on F.Silkscreen,,,board setup constraints silk,,,needs-fix-cosmetic,silkscreen legibility; JLC clips silk on pads/edge automatically
|
|
DRC,281,silk_overlap,warning,Silkscreen clearance,155.25,116.75,Reference field of Q23,,,board setup constraints silk,,,needs-fix-cosmetic,silkscreen legibility; JLC clips silk on pads/edge automatically
|
|
DRC,282,silk_over_copper,warning,Silkscreen clipped by solder mask,123.55,56.75,Reference field of Rigb1,,,Local override,,,needs-fix-cosmetic,silkscreen legibility; JLC clips silk on pads/edge automatically
|
|
DRC,283,silk_over_copper,warning,Silkscreen clipped by solder mask,145.5,109.25,Reference field of C10,,,Local override,,,needs-fix-cosmetic,silkscreen legibility; JLC clips silk on pads/edge automatically
|