Leopoldo Rodríguez 01dc30c06a hbox-docs: sitio MkDocs Material para tecnicos (ES)

- contenido curado desde Drogheda via scripts/sync-docs.sh (procedimientos
  de banco, montaje/arneses, diagnostico remoto, guias git)
- scripts/deploy.sh: mkdocs build --strict + rsync al servidor Helgen
- README con setup de nginx + htpasswd para acceso privado de tecnicos

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YJ4eAB6zjQT49RVwpgfKdt

2026-09-15 18:23:26 +00:00

2.8 KiB

Raw Blame History

title

project

date

HBOX Watchdog v3 PROD — Harness / Connector Pinout

Auto-generated from the PCB netlist (placement-independent). GND = the board ground plane (In1.Cu); its full pad list is omitted. Power nets flagged for wire gauge.

Conn	Function	Pins
P1	GX16-5	5
P2	5V-IN-SD15B05	2
P3	RTK2B-UART1	4
P4	BATT-1S4P+NTC	3
P5	TEMP_PROBE	4
P6	FAN	4
P8	PANEL_LED	2
P10	RESET-EXT	2
P11	CUTOFF-SW	2
P12	NTC-HOTSPOT	2
P13	MODO-B-UPLINK	3

P1 — GX16-5

Pin	Net	Ties to
1	`24V_IN` ⚡power	D10.1, Q10.2
2	`GND`	board ground plane
3	`IGN_IN`	Rig.1
4	—	(no net)
5	—	(no net)

P2 — 5V-IN-SD15B05

Pin	Net	Ties to
1	`VEH5V` ⚡power	C30.1, C31.1, JP1.2, R51.1, R55.1, R7.1, RS1.1, U6.6, U6.16
2	`GND`	board ground plane

P3 — RTK2B-UART1

Pin	Net	Ties to
1	`SW_5V` ⚡power	C3.1, C40.1, MOD1.5, Q1.3, U7.2, U7.7
2	`GND`	board ground plane
3	`GNSS_TX`	J1.8, MOD1.16
4	`GNSS_RX`	J1.9, MOD1.15

P4 — BATT-1S4P+NTC

Pin	Net	Ties to
1	`BAT_PLUS` ⚡power	C35.1, L6.2, R5.1, U6.23
2	`GND`	board ground plane
3	`NTC`	R55.2, U6.17

P5 — TEMP_PROBE

Pin	Net	Ties to
1	`3V3` ⚡power	Cu3.1, Cu4.1, D5.1, J1.18, J2.20, MOD1.2, R3.1, R30.1, R31.1, R42.1, R57.1, R58.1, Rdfu.2, Rtp.1, U3.3, U4.5
2	`GND`	board ground plane
3	`I2C_SDA`	J2.15, R31.2, U3.1, U4.6
4	`I2C_SCL`	J2.14, R30.2, U3.2, U4.1

P6 — FAN

Pin	Net	Ties to
1	`5V_FAN` ⚡power	C23.1, D2.1, JP1.1, L2.2, R20.1
2	`FAN_RET`	D2.2, Q2.3
3	`GND`	board ground plane
4	`FAN_TACH_RAW`	Rts.1

P8 — PANEL_LED

Pin	Net	Ties to
1	`LED_A`	D1.2, R3.2
2	`LED_K`	D1.1, Q4.3

P10 — RESET-EXT

Pin	Net	Ties to
1	`NRST`	J1.5, SW1.1
2	`GND`	board ground plane

P11 — CUTOFF-SW

Pin	Net	Ties to
1	`MAIN5V` ⚡power	C32.1, C33.1, C34.1, JP2.1, JP3.3, JP4.1, Q7.1, Q7.2, Q7.3, R53.1, U6.1, U6.24
2	`SYS5V` ⚡power	D6.1, F1.1, J1.20, J2.18, K1.2, R2.2

P12 — NTC-HOTSPOT

Pin	Net	Ties to
1	`NTC_TEMP`	C24.1, J1.15, R42.2
2	`GND`	board ground plane

P13 — MODO-B-UPLINK

Pin	Net	Ties to
1	`USART1_RX`	H3.2, J2.7, K1.1, MOD1.23, Rdfu.1
2	`DIN_4G`	J7.3, K1.5, K1.6
3	`GND`	board ground plane

2.8 KiB Raw Blame History